Bug report. When using DX Labs Commander, Thetis 2.10.3 will work fine until the power button on the GUI is clicked. That locks the entire GUI. The only way out is to kill Thetis in Task Manager.
Ernie
W2FMU
Search found 46 matches
- Thu Nov 02, 2023 6:55 pm
- Forum: Thetis
- Topic: Thetis v2.10.3.3 released
- Replies: 103
- Views: 66841
- Fri Sep 01, 2023 11:00 am
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Severe problem with PureSignal
- Replies: 41
- Views: 32648
Re: Severe problem with PureSignal
When I bought my 7000dle new in 2017 it had a similar issue right out of the box. I sent it to Doug and he found a relay that did not have all its pins soldered. He fixed it and its been working great ever since.
W2FMU
W2FMU
- Thu Jun 22, 2023 11:24 am
- Forum: Network Connections & Network Hardware
- Topic: No Receive, Transmit OK
- Replies: 4
- Views: 6059
Re: No Receive, Transmit OK
Sherman, I never leave Thetis up when the radio is off. Something gets screwed up in it. This is fairly repeatable. Always close Thetis and you will not have this problem. YMMV..
W2FMU
W2FMU
- Thu Jun 08, 2023 11:28 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Dynamic vs. Condenser Microphone
- Replies: 10
- Views: 7124
Re: Dynamic vs. Condenser Microphone
Hi Tem, I have a 7000DLE and an RE27N/D. I have run it straight into the front of the radio with great results, but now I use a Behringer UMC202HD USB sound interface with excellent results too. I have a pair of amplified speakers, Fostex 6301B's. These do all my PC sound though the Behringer. No fa...
- Sun Sep 11, 2022 8:16 pm
- Forum: Thetis
- Topic: Thetis 2.9.0.6 lockup on return to receive from transmit
- Replies: 37
- Views: 6104
Re: Thetis 2.9.0.6 lockup on return to receive from transmit
dieseldawg wrote:Ferrites on mouse and keyboard don't help. Beginning to suspect a hardware problem with the 7000.
Where are you located? There may be other 7k users near you, pretty easy to swap out hardware and eliminate that as an issue.
Ernie, W2FMU in Jasper, GA
- Sat Sep 03, 2022 1:30 am
- Forum: Thetis
- Topic: Thetis 2.9.0.6 lockup on return to receive from transmit
- Replies: 37
- Views: 6104
Re: Thetis 2.9.0.6 lockup on return to receive from transmit
By crash I mean the Thetis program freezes, no receive and no response to pushing buttons, except Power and the PLL. Strangely, the transmit usually works. Almost always the radio must be cycled off then on to make it work again. Always requires shut down and restart of Thetis. You have a networkin...
- Thu Sep 01, 2022 12:11 am
- Forum: Thetis
- Topic: Thetis 2.9.0.6 lockup on return to receive from transmit
- Replies: 37
- Views: 6104
Re: Thetis 2.9.0.6 lockup on return to receive from transmit
Can you describe your 2 networks? IP's and Network masks, etc?
- Wed Aug 31, 2022 11:03 am
- Forum: Apache Labs News
- Topic: Introducing the ANAN-8000DLE MKII
- Replies: 101
- Views: 123487
Re: Introducing the ANAN-8000DLE MKII
This is the power supply I think I would go with 48v @32A. Plenty of headroom and runs a frequency that plays nice with radio. https://www.meanwell-web.com/en-gb/ac-dc-single-output-enclosed-power-supply-output-rsp--1500--48 Be careful the BLF188XR is sensitive to High or low voltage! Is the Meanwe...
- Tue Aug 30, 2022 9:53 am
- Forum: Apache Labs News
- Topic: Introducing the ANAN-8000DLE MKII
- Replies: 101
- Views: 123487
Re: Introducing the ANAN-8000DLE MKII
kc2rgw wrote:Ernie wrote:Abhi, Will the new 8000 be okay with 53.5 VDC in as some of the switchers put out?
Thanks
W2FMU
Most have a pot to set the voltage.
The Huawei r4850g2 supply does not have a pot. It must be adjusted via the CAN bus which is a bit tricky. It puts out 53.5 VDC. I have 2 of them.
w2fmu
- Mon Aug 29, 2022 3:36 pm
- Forum: Apache Labs News
- Topic: Introducing the ANAN-8000DLE MKII
- Replies: 101
- Views: 123487
Re: Introducing the ANAN-8000DLE MKII
Abhi, Will the new 8000 be okay with 53.5 VDC in as some of the switchers put out?
Thanks
W2FMU
Thanks
W2FMU
- Thu Jul 14, 2022 7:53 pm
- Forum: Thetis
- Topic: New to me 100B signals lower than other radios.
- Replies: 30
- Views: 5799
Re: New to me 100B signals lower than other radios.
You might also try resetting the database. A corrupted database can do some strange things.
W2FMU
W2FMU
- Sun Jun 12, 2022 6:18 pm
- Forum: Amplifiers & Tuners
- Topic: Power spikes from ANAN 7000 DLE MKII and SS amps?
- Replies: 4
- Views: 6293
Re: Power spikes from ANAN 7000 DLE MKII and SS amps?
Thetis/7k does not overshoot at all. I have been running my 7k with my RF-Kit SS amp for over 4 years now. Probably the best behaved transmitter out there.
W2FMU
W2FMU
- Thu May 05, 2022 11:13 am
- Forum: Thetis
- Topic: Thetis v2.9.0 - Updates and Issues
- Replies: 431
- Views: 116041
Re: Thetis v2.9.0 - Updates and Issues
2TON issue. The 2TON button looks good when I start Thetis, but when I click it, it changes to white on gray and stays that way, almost invisible. I am using the W1AEX skin. I looked in the skin directories and cannot find this graphic, it must be imbedded in the code.
W2FMU
W2FMU
- Fri Apr 29, 2022 10:00 pm
- Forum: Thetis
- Topic: Thetis v2.9.0 - Updates and Issues
- Replies: 431
- Views: 116041
Re: Thetis v2.9.0 - Updates and Issues WANTWISH
1. I would like to see the "RXBYPASS on TX" checkbox available on the GUI instead of the setup screen. I (and others) have to check/uncheck regularly when going QRO. Why do you have to do this when QRO? The external coupler will work perfectly fine to feedback the output of the ANAN even ...
- Fri Apr 29, 2022 1:09 pm
- Forum: Thetis
- Topic: Thetis v2.9.0 - Updates and Issues
- Replies: 431
- Views: 116041
Re: Thetis v2.9.0 - Updates and Issues WANTWISH
WANTWISH 1. I would like to see the "RXBYPASS on TX" checkbox available on the GUI instead of the setup screen. I (and others) have to check/uncheck regularly when going QRO. 2. I would like to see the "Play sound on expiry" button on the GUI so it would be easy to turn sound on/...
- Mon Apr 18, 2022 12:32 am
- Forum: Thetis
- Topic: Thetis v2.9.0 - Updates and Issues
- Replies: 431
- Views: 116041
Re: Thetis v2.9.0 - Updates and Issues
TCI between Thetis and RF-Kit is working!
Thanks Richie!
Ernie
W2FMU
Thanks Richie!
Ernie
W2FMU
- Thu Apr 07, 2022 4:04 pm
- Forum: Amplifiers & Tuners
- Topic: TCI with RF Kits RF2K amplifier
- Replies: 61
- Views: 52772
Re: TCI with RF Kits RF2K amplifier
SunSDR installed. RF-Kit configured to match. TCI connects, amp tracks band changes perfectly, nothing ever shows up in the log box.
- Thu Apr 07, 2022 10:46 am
- Forum: Amplifiers & Tuners
- Topic: TCI with RF Kits RF2K amplifier
- Replies: 61
- Views: 52772
Re: TCI with RF Kits RF2K amplifier
Same results emulating either.
- Wed Apr 06, 2022 6:36 pm
- Forum: Amplifiers & Tuners
- Topic: TCI with RF Kits RF2K amplifier
- Replies: 61
- Views: 52772
Re: TCI with RF Kits RF2K amplifier
Firewall passes check.
OE3IDE has it working on his setup.
OE3IDE has it working on his setup.
- Wed Apr 06, 2022 4:43 pm
- Forum: Amplifiers & Tuners
- Topic: TCI with RF Kits RF2K amplifier
- Replies: 61
- Views: 52772
Re: TCI with RF Kits RF2K amplifier
Thanks everybody, now I am on the right page . It looks like OE3IDE has it working. I am set up the same, but get "No TCI Available" on the amp although Thetis shows the client connected. My Thetis PC is 192.168.1.49
- Wed Apr 06, 2022 1:09 pm
- Forum: Amplifiers & Tuners
- Topic: TCI with RF Kits RF2K amplifier
- Replies: 61
- Views: 52772
Re: TCI with RF Kits RF2K amplifier
Richie,
Some slow progress.
Got TCI to bind to PC address, now I get the following;
Amp says "No TCI Available."
Thanks
Some slow progress.
Got TCI to bind to PC address, now I get the following;
Amp says "No TCI Available."
Thanks
- Wed Apr 06, 2022 11:32 am
- Forum: Amplifiers & Tuners
- Topic: TCI with RF Kits RF2K amplifier
- Replies: 61
- Views: 52772
Re: TCI working & not working
Dave, same here, no luck getting it to work.
Ernie
W2FMU
Ernie
W2FMU
- Wed Apr 06, 2022 11:01 am
- Forum: Amplifiers & Tuners
- Topic: TCI with RF Kits RF2K amplifier
- Replies: 61
- Views: 52772
Re: Thetis v2.9.0 - Updates and Issues
TCI and RF-Kit, has anyone got the 2 talking yet? I am having no luck here.
RF-kit has TCI installed, pointing at the Anan/Thetis IP and port. Thetis 2.9.0.3
Thetis is set for default,, 127.0.0.1:13013 and server running.
No traffic in log window.
What am I missing?
Thanks
W2FMU
RF-kit has TCI installed, pointing at the Anan/Thetis IP and port. Thetis 2.9.0.3
Thetis is set for default,, 127.0.0.1:13013 and server running.
No traffic in log window.
What am I missing?
Thanks
W2FMU
- Sat Mar 19, 2022 4:28 pm
- Forum: Thetis
- Topic: So you downloaded the 32 bit version of Thetis: why???
- Replies: 23
- Views: 5446
Re: So you downloaded the 32 bit version of Thetis: why???
I'm waiting for the 128 bit version.
- Fri Jan 28, 2022 11:07 am
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Anan-7000 MkII freezing during transmission
- Replies: 3
- Views: 1907
Re: Anan-7000 MkII freezing during transmission
What does it do into a dummy load without the tuner?
- Wed Oct 14, 2020 12:52 pm
- Forum: Thetis
- Topic: Thetis 2.8.11 Released!
- Replies: 232
- Views: 238285
Re: Thetis 2.8.9 Released!
2.8.9 VFO A lock is busted. Clicking other bands causes the VFO A to toggle modes. Is anybody else seeing this?
W2FMU
W2FMU
- Sat Apr 04, 2020 11:42 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Powered Speaker for my setup !!
- Replies: 69
- Views: 64550
Re: Powered Speaker for my setup !!
Jim,
That sure sounds like a hardware issue. I would send that radio to Doug for repair.
W2FMU
That sure sounds like a hardware issue. I would send that radio to Doug for repair.
W2FMU
- Sat Apr 04, 2020 10:13 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Audio distortion after a few hours
- Replies: 5
- Views: 5056
Re: Audio distortion after a few hours
Dave, here is another person with the same issue;
https://apache-labs.com/community/viewtopic.php?f=12&t=3350
https://apache-labs.com/community/viewtopic.php?f=12&t=3350
- Fri Mar 13, 2020 11:56 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Powered Speaker for my setup !!
- Replies: 69
- Views: 64550
Re: Powered Speaker for my setup !!
I am using a pair of Fostex 6301B's plugged in to the headphone jack on the front.
W2FMU
W2FMU
- Tue Feb 18, 2020 10:58 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: Virtual serial Port Woes
- Replies: 10
- Views: 9835
Re: Virtual serial Port Woes
FWIW, I have had to make the pairs in vspMGR as administrator in order to get them to work properly.
W2FMU
W2FMU
Buck wrote:Thanks for moving the topic; it's been a while. I downloaded the 64-bit version and made the payment. I'll let you know how it works for me.