Is there a way / how to confirm the problem once I open the 7000?

I am incline to leave it as it is and just continue using the front port for my speakers.

Thanks for the pointer to the schematic, Scott.

As mentioned, I have been using this speaker setup for several years without any issue. But nothing is eternal :(

I found the amplifier chip on Amazon; is this what we are talking about?: amplifier TPA0202 It is also being sold in other websites ...

I must have damage something inside but how?

For as long as I have had the 7000DLE, I've been using an external speaker via the connectors on the back of the radio (L & R). Today, there was no sound coming from the speaker. I know the speaker is working since I can use it with another radio. The ...

Sounds very interesting. How can I implement it with my SPE 1.3 amp?


So, in theory almost any hardware device that has a data contention such as a DB9 COM port or other connection such as antenna tuners, Rotor control, HF amplifiers and more can have a container that allows display and control of ...

vk1hx wrote:How will it go with the SPE?

I would like to have a meter for the SPE 1.2 Expert Amplifier too. Need the how to

You need some sort of hardware (front end protector). Ticking that setting might not be all is needed.

I use W6LVP Amplified RX loop antenna for CW Skimmer https://www.w6lvp.com/product/w6lvp-amplified-receive-only-magnetic-loop-antenna/

W6LVP Medium.jpeg

I split that connection via a Mini-Circuits and reroute to other RX antennas, i.e., SDRPlay, IC7610
minicircuits Medium.jpeg

My dipole ...

Thanks. Yes, I'll use the Elecraft as a reference.

The Piexx “SO2Rxlat” device, will allow the DXD to be used with a USB-only computer like is the case nowadays.

I have read the manual. I thought that it will have an entry for setting up Anan type of radio but this device is from the Flintston's era!

J2 / J3 are the 8-pin DIN. I will work in figuring out what pins to connect the Anan lines,

DX Doubler J2-J3.png

I think I can use the Elecraft diagram ...

Thanks....Yes, it is about making the cables for the Anan.

I have both Anan / IC7610 talking to N1MM....and I used them each for contesting but not together. I would like to be able to use both concurrently.

Good evening all and Happy Holidays.

I've been enjoying playing with SO2V using N1MM+ and it has come to the time to switch to SO2R, if possible.

My radios:
Anan 7000DLE embedded PC system and Icom 7610

Amp: SPE 1.3K

I have gotten a DX Doubler (DXD Top Ten) device and Piexx “SO2Rxlat” device ...

That was great! When you have play with it for a while, can you please post your like / dislike?

I wonder how many of us are using it and whether or not if is worth the investment

If you are definitely not going to use it, I can take it from you. Let's work a deal.

Too much processing in the background, maybe?

W7GES wrote:Does Thetis allow CAT control via TCP?

N1MM just added capability for radio control via TCP/IP address and IP port.

I couldn't find this in the settings menu. Is there a way to add this?

Thanks,

George / W7GES

Maybe one of these days, George.

Thanks for writing, George.....a sched sounds good...I will send you a note via your QRZ email....so I can type off the forum to you

ThetisRTTY-Settings.jpg Good day to everyone.

I am looking for assistance with Thetis (v2.8.11 x64 protocol 2 v2.1.18 / 21k7) settings for N1MM / RTTY usage. I am interested in receiving information about Transmit Filter and Width/Shift.

Currently, I am using IC7610 for RTTY. Any recommendation ...

Thanks, Scott.

After reading your post, and knowing that I don't have any coupler / cable / ALC settings in the wrong direction, I added a new default TX profile to my arsenal. While using this added one everything is working as expected.

So I conclude that my TX profile had some corruption ...

If you use PS it will be adjusted. There are also times when it is reset to 31.

Richie.

Thanks for the reply. I am not quite understanding why in some cases it goes all the way up to zero attenuation? Won't this blow out some receiver module? Shouldn't it be hardlocked to at least 15db ...

I changed the title accordingly.

I am fine in the way that I have it setup with DXLab. The sequences / sliders are not mandatory in my case as I can still use my Hercules DJ Control for the most items on Thetis. I just thought someone was doing them.

I will still look into the information ...

I am using DXLab for commanding Anan 7000dle MKII. It works for the main basic things; modes, bands. DXLab has some neat features such as sequences / sliders. I use those with Icom 7610 / 9700....basically, I don't touch these radios because DXLab Commander takes care of that with proper sequences ...

Thanks. Interesting as I just re-enable it and it is not shutting down Thetis anymore...oh, well.

I am using Thetis v2.8.11 with 7000dle MKII. In doing this weekends ARRL test I noticed something really weird. Let me be brief:

I am using N1MM+ and in Thetis setup I make it to be Focus Master. Say I make a contact and then realized I made a mistake so I go and edit the contact. As soon as the ...

A while ago, I upgraded the 7000dle MKII with RAM and new larger SSD disk. This 128GB is the original one. It can be used to clone your Windows OS housed in your existing / similar disk and used as a back up. Yes, failures can happen.

$45 shipped CONUS

Changing the setting on Orban does not make any difference. I'll keep it the way it is.

Thanks for your assistance:


It appears you have started the Orban app since the screenshot shows the little on/off button at the bottom gold in color. However, just to be safe, set the autostart option in Orban to ON.

* I set the autosart option in Orban to ON and restarted the PC

It is not ...

I followed this post and set the sounds per the instructions. While trying to debug the RX levels, and after I installed the Orban software, I cannot find the Orban





The instructions said to connect Orban to Thethis using the VAC cable. When I assert Tune, I do not see anything displayed on the ...

Ed, did you get the Anan 7000dle?

I found this website for a company based in Florida:

http://q5signal.com/index.php?route=common/home

I would like to experiment with Anan 7000dle (new box with embedded PC) using the 2m / 70cm for satellite rx/tx.

I wonder what others are using / what port(s), etc.. I heard a fellow today using ...

Helmut, you might want to open a support case:

https://vac.muzychenko.net/en/support.htm

I am sorry but I cannot do run a test on my working system. I could try on another system that has the exact same software with the newest version of VAC. I will post when I am done.