A friend of mine, who is 1km from my QTH, using a new Yaesu 991A with 100w was showing on my panadapter a wide 40 to 60 KHz signal full of splatter.

It seems that this radio has serious transmission filter problems.

EDIT:
Watching the video, it looks like you have the NB On. With strong close ...

Do you have NB active?, if so turn it off

The problem is not with the 10MHz port, it is when a 50 Ohm connector is plugged into the XVRT port.

You know, you learn something new every day!

I had never realized this before because I don't have an transverters, but it would appear that on any Orion MKxx based model the subject XVTR port is switched between TX and RX, and when it is in an RX condition it is paralleled with the output of the ...

It is not related to G2, but Following this thread , a friend and I recently installed 50 ohm terminators on the two SMA ports (10 MHz input connector and transverter port) of our Anan 7000DLE and a 7000MKII (we had previously installed terminators on all the unused antenna ports).

The result is a ...

I'm talking about port #11

It is not related to G2, but Following this thread , a friend and I recently installed 50 ohm terminators on the two SMA ports (10 MHz input connector and transverter port) of our Anan 7000DLE and a 7000MKII (we had previously installed terminators on all the unused antenna ports).

The result is a ...

Enjoy your new toy Bent!

Check in the registry that the throttling index tweak is correctly applied.

After a few Windows updates, it reverts to its default values.

Please, look at this video:

[url]https://www.youtube.com/watch?v=lKlPnwRQTyY[/url]

Ben is running his radio remotely over the Internet, but on his radio end he has a microwave link to his Internet provider (no fiber available at his summer house).

I know this because I helped him set up his OpenVPN server and client.

Congratulations Michael!

Thanks, Jordi - I was trying to make some sense out of your server profile but I am really not sure. I use udp instead of tcp and of course a different port number but this all should not make a difference (I tried tcp but some problem). I assume the problem is rather related to the routing and ...

This is my server profile.
Take a look and compare with yours...

EDIT:
Config file deleted...

You can use any new client version, but you must delete the TAP interface and install an old one.

Go to https://build.openvpn.net/downloads/releases/

And download this version:
tap-windows-9.23.3-I601-Win10.exe

This is the latest TAP version that worked fine for me.

Michael, my first OpenVPN server ran for years on a dedicated RPi4.

Later I moved to a low power (8-10w) Windows Mini PC (Intel N100 and 16 gigs of ram) and it was night and day.
Now my VPN connections are more reliable and faster.

I don't know if the home routers are powerful enough, but the ...

Michael wrote:ah - this explains it all. I will look for an alternativ VPN supporting bridging protocol 2.

Thanks for the support,

Michael

OpenVPN works for me...

Yes, my solution is to use the latest working diver for Windows TAP (dated in 2019). My VPN setup works fantastic for remoting my radio.

If SDRConsole also failed, it is not the same problem as with my VPN and the initialization packet.

I have assumed that your vpn is configured in bridged mode ...

no - I am using WireGuard with a defined ddns and security key . It works with all other apps.

73, Michael

Michael, I don't know anything about Wireguard, but Thetis needs to send a "special" (broadcast?) packet to start up the radio.

To check if this is you problem with your WireGuard config ...

Michael wrote:Is there information which ports need to be opened on the router in order to access ANAN G2 Ultra via WLAN?

I can access the RaspPi by it's IP address through a VPN but when starting ANAN through Thetis a network error pops up.

Best regards,

Michael

Are you using OpenVPN?

Had same problem for months that magically disappeared after updating to W11 24h2

For anyone who might be interested, I just upgraded to Windows 11 version 24H2 and then had to reapply the network throttling index tweak because the upgrade changed the registry values.

Try to force link speed to 1Gb, instead of using auto negotiation, in ethernet adapter that connects to your Anan.

Check PSTrotator and confirm it is in tracking mode.

Every time you use the stop function in the container, PSTrotator changes from tracking to manual mode.

If you are using tracking, change the rotator container stop command from <PST><STOP>1</STOP></PST> to <PST><STOP>1</STOP></PST><PST><TRACK>1 ...

ramdor wrote:someone with one of these amps, or access to them, needs to code up some middleware. Other option is to send me one of them

Or both!

Launch Thetis in Admin mode, then go to Setup\General and tick "Network Throttle Index Tweak".

Restart Thetis and try

rbduck wrote:

Tony EI7BMB wrote:Untitled.png

That bottom checkmark doesn't exist in my version. There must be something I need to do before this. I also never saw an "accept" below the rules. list..

ROLES, not RULES

Go to Server roles/roles

Richie,
Is there any way to detect the change of value of a variable?

I have created a text overlay that shows the azimuth of the rotor (%DdoE.AZ%), but I would like it to "pulsate" (using a led indicator) while the rotor is moving.

Is it possible?

ramdor wrote:there might be an issue at startup with the IO connectors not starting, will be an update later this evening, just adding in tcpip client connector

Just had this same problem 3min ago...

argghh.... try this one, sorry about this. I forgot that strings might match an enum type, and indeed, 'None' did.

https://www.dropbox.com/scl/fi/9hjxe3ge6mgxn954fs8k9/Thetis-v2.10.3.6-dev_8_wip7.x64.msi?rlkey=2e44hdv4w0646ccphbgc80xw6&st=f2ym4kip&dl=0

you will see dev8(wip7)

Cheers

Richie ...