Search found 10 matches
- Tue Feb 23, 2021 10:12 pm
- Forum: Keys, Keyers, Paddles & Bugs
- Topic: Crackling CW Sidetone
- Replies: 3
- Views: 8331
Re: Crackling CW Sidetone
Haven't tried an external keyer, but I was getting close.... was ready to give up on the internal keyer but I gave it another go and got lucky. I attached a screenshots of what is actually happening. If you look you'll see the reason for the pair of initial dits (bottom pic). Interesting how the car...
- Tue Feb 23, 2021 8:22 pm
- Forum: Keys, Keyers, Paddles & Bugs
- Topic: Crackling CW Sidetone
- Replies: 3
- Views: 8331
Re: Crackling CW Sidetone
Problem solved..... never leave Pure Signal on in CW mode, silly me!
- Mon Feb 22, 2021 7:03 pm
- Forum: Keys, Keyers, Paddles & Bugs
- Topic: Crackling CW Sidetone
- Replies: 3
- Views: 8331
Crackling CW Sidetone
In CW mode using iambic paddles with the internal keyer, with the sidetone enabled, the first time I touch a paddle I get a brief crackling sound and two dits when it should be dash. This only occurs the first touch of either paddle. Stating it another way if I’m sending a word at 25 wpm it’s only t...
- Sat May 09, 2020 11:25 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: No Speaker Audio - Blown Audio Output Amp ??
- Replies: 2
- Views: 3265
Re: No Speaker Audio - Blown Audio Output Amp ??
Thanks for the help Scott ... and I did use the stereo plugs wth tip and ring.
- Sat May 09, 2020 10:05 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: No Speaker Audio - Blown Audio Output Amp ??
- Replies: 2
- Views: 3265
No Speaker Audio - Blown Audio Output Amp ??
I suspect the amp for the speaker output has failed in my 7000 DLE MKII. One evening a couple weeks ago, as I increased the volume the speaker started making a loud motorboating sound, almost like a 10 Hz square wave from the way the speaker cone was moving, adjusting the audio level or hitting the ...
- Thu Dec 05, 2019 10:11 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
- Replies: 185
- Views: 178008
Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic
I appreciate that Scott, my interest is in hearing from someone who is successfully running a P2 version in order to avoid a testing adventure. Do you happen to know if this new version (Black Box) was just a packaging change or if there are component changes that could impact the firmware behavior....
- Thu Dec 05, 2019 5:08 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
- Replies: 185
- Views: 178008
Re: New Black Edition 7000 DLE MKII Protocol 2 Firmware
Got my hands on the new black edition 7000 DLE MKII. Anyone have any experience with Protocol 2 on this one?
- Thu Aug 08, 2019 7:12 pm
- Forum: PowerSDR mRX
- Topic: Pops & Clicks in Audio
- Replies: 6
- Views: 6098
Re: Pops & Clicks in Audio
Yes Gary I purchased a second NIC card and I'm using it like you stated, one NIC goes to the rig and the one on the MB goes to my switch. While I cannot say with certainty what changed under the covers I can say with certainty that before the change when I decreased the buffer size in the Audio tab ...
- Thu Aug 08, 2019 12:02 pm
- Forum: PowerSDR mRX
- Topic: Pops & Clicks in Audio
- Replies: 6
- Views: 6098
Re: Pops & Clicks in Audio - Fixed!
Just a quick post to let folks know that the problem was resolved by providing a dedicated network adaptor for the 7000. I had been using a switch, but using the "WhySoSlow" tool noticed a bottleneck occuring everytime FT8 went through a decode cycle. The recommended latency tools showed I...
- Wed Jul 31, 2019 6:15 pm
- Forum: PowerSDR mRX
- Topic: Pops & Clicks in Audio
- Replies: 6
- Views: 6098
Pops & Clicks in Audio
Purchased a 7000DLE MKII (no embedded PC) last month and have been having a wonderfull time with it (OpenHPSDR mRX v 3.4.9). I have one annoying problem that I cannot seem to iron out. At times the audio output (speaker) will have click and pop artifacts in it. It occurs randomly and doesn't seem to...