Hello,
I have an Intes processor.

Maybe it is also interesting to specify the hardware of the radio with the firmware.
I use a Hermes board.

FW: Hermes 10.8 pre18
SW: Thetis x64 2.8.11
protocol 2

73, DL5AI
Arno

Hello everyone, ;) I too can confirm the problems with Win 10 Home; Version 2009. I have about 1 sec. PTT latency with P.S. My setup ran with Win 10 Home; Versiom 1909 without problems. I have not changed anything! With Win 10 Home; Version 2004 latencies suddenly appeared! I connected another lapto...

Hello Rick,
Congratulations. Pre20 looks like everything is going great.
You've done an absolutely perfect job. I don't know how you did it. I really appreciate you making P.S. work.

Hello everybody, I come to the same conclusion as Daniel, DL7GT. When I turn on P.S., the signal degrades. Bad IMD and splatter are easily seen in the picture. P.S. on.PNG In the second picture you can see the situation when P.S. is switched off. IMD is better now (it should be exactly the other way...

Hello, everybody, I can confirm the noise of the TX signal. It is present in my system during the warm-up phase. That's a new bug that's been creeping in! From my point of view it is important to eliminate it first. FW 10.8_pre09 has no noise with MOX/PTT. After that an error has obviously crept in!...

Hello Rick + all with me, there's no change with P.S. I just think out loud, so it can all be stupid. ;) If P.S. works or not is decided in the first sesond after the PTT is pressed. If P.S. works (SetPk=GetPk) I can talk for one hour without letting go of the PTT and it probably works 100% the whol...

hi Daniel and Ritchie, at my Side PS is working very well (Anan 200D) with 2.6.8 final. I will try 2.6.9 ..... over the Weekend. [b]RITCHE: Your work is OUTSTANDING many thanks agian !!! I will test every Version you made, and report, I think this is the only Way to get a Super Software for our Tra...

Hello, Andy and everybody,
I don't know of any Thetis version that runs stable on ANAN10 / Hermes,
and I have tested many versions.
And all the people I know have the same problem.

If I switch to protocol 1, Power SDR runs 100% stable.

73, DL5AI
Arno

Hello Rick, also I have made a YouTube video about the problem P.S. jumps in / out. It shows the same reaction as with video of Andy. (The video is without sound!!) https://www.youtube.com/watch?v=5gdQyzIeA1U Always pay attention to the mouse pointer. I wonder why you can't reproduce the problem at ...

Hello Scott Hello Rick Hello everybody :-) I use the following configuration: HW: Hermes Board SW: Thetis v2.7.0. (A2) FW: v10.8 pre9 I can confirm what Andy (DL6EAT) described. I don't need to repeat it completely. Pure signal runs better, but not yet stable! As I reported earlier on ^^ "Thu F...

Hello everybody, I have been using the Hermes Board with PureSignal for many years. Under protocol 1 P.S runs also 100% ! Now I use the following configuration: HW: Hermes Board SW: Thetis v.2.6.9 (c3) FW: 10.8 pre 5 Pure signal is not yet stable. I guess 50% TX is okay and 50% is not okay. I notice...