Sadly, no, same as for all other panes in Thetis which are difficult to read on a 4K screen.
It would be a enlightened for my OM eyes (literately OM) if the font's sizes where selectable.

For example what Simon did in SDR-C with selectable font sizes in the Favorites and Frequency Database panes ...

A few weeks ago i did a new WIN11 install (latest release), from scratch on a new SSD, and the default value is again 0000000a
I leave it this way because i don't see/hear any issues anymore with my new PC hardware.
Using a MSI motherboard + i7 13700K. Voicemeeter Banana also reinstalled but i haven ...

I would like at least a seperate forum for the G2
Very interesting radio (wish i had one) but other ANAN model owners (like me) get overwhelmed by all G2 related messages.

R/Leon

Hi Scott, thanks for reminding, i got the same message from Hercules.
Getting old... already downloaded it 3 years ago. But to be honest, i had never understood very well how to implement these hex codes in Thetis.
The penny only dropped (is that a commonly known saying?) when i started ...

FYI .. did some tests but it seems that the DJ Controll Compact uses other hex-codes.
I asked Hercules support, will let you know if they respond.

Hi guys good news i think for all Hercules Starlight owners.

After contacting the Hercules support guys i got a excel list of all hex codes from this model.
I have done some editing to that file to make things more clear and added a few Thetis examples.

Please read the first tab first. I've put a ...

In a few older posts a misunderstanding has been created about the LED's addressing for the Hercules controllers.

For the Hercules Starlight (and possible previous models):

The LED ON code is SSYY7F ( So, not F7 as posted before!) (7F is 128 decimal)
The LED Off code is SSYY00 (zero-zero)

See ...

Hello NIOZ, do you have a list of the LED (hex) codes for the Starlight?
Or would you be so kind to share your midi config file as a reference?

I have searched the internet for a long time but can't find anything.

Thanks & regards PD3LK (Leon)

Hi, you'll have to edit the database yourself, but this post shows where you can download a good editor from K9DUR
Made for PowerSDR but it's also usable for Thetis.
Don't forget to close Thetis and copy the database, before editing.

https://community.apache-labs.com/viewtopic.php?f=9&t=3689&p ...

Is HPSDR installed under /Program files x86?
Than reinstall it in his own root directory, i.e. C:/HPSDR

This should solve the second issue but not sure if you can use multiple instances ... (moi not using HPSDR anymore)

Hi guys, for those who are interested....

Raimund Forstmeyer is an German/Italian programmer, some of you may know him from his RFRScanner software.
Some months ago he started with a new project, a CAT protocol converter between Icom --> Kenwood.

All started with the need of such a program between ...

Sorry, got lost in your story. I have no expirience with Arduino, Teensy or what so ever but why not use the Thetis MIDI options and a simple and cheap Hercules Starlight? It's USB connection doesn't interfere with other USB ports.
Or dismantle the pcb in the Hercules and bring it and the controls ...

Hi, when does Thetis come into the picture?

regards

That makes my problem clear too. Spended a "few" hours in vaine on this to get it right :(

Very pitty for users (like me) who use there radio only for listning to utility, mil, and air traffic, and use multiple RX antenna's.

I rather don't use antenna port 1 for RX to protect some expensive ...

or look here: C:\Users\YOU\Music\Thetis\
In my case alle recordings are there.
(i believe this is a default location, can't remember ever changing the path)

Greetz Leon

When I was looking into this and coding up the adjustment controls I used an ammeter to get the current values for idle/rx, and then from 0w in 10w increments up to the max of my 7000dle. I then tweaked the offset and sensitivity values until the readings in Thetis closely matched. See attached pdf ...

I have a 7000 DLE and it draws 1.2 amps on RX. I checked it against a known digital current meter. You have to go into the calibration tab and adjust the two settings for the current to get it to read correctly on low (RX) and high (TX).

Thanks for the tip... with offset 222 it now shows the ...

FWIW , i did what Ramdor advised : windows 10, go to start button, select settings, ease of access, display. Use slider Make text bigger.
But then the Windows 11 equivalent.

As i said before, it solved this issue but it's not usable for me on a 4k screen, all desktop icons get much to small for ...

oke, i understand this now but i suppose we have to live with it.
I need 125% otherwise i can't read the text under the desktop icons, just a minor issue with 4k screens.

thanks, Leon

https://github.com/ramdor/Thetis/issues/7

Hi,

I went back to Thetis_v2.8.8-x64_Setup.msi .... it was present then too.
My windows text size is set at 125% for ages but changing it to 100% makes no difference.
The boxes arround VFO-A and VFO-B are a bit to close to the Setup <--> Find buttons, i ...

Install the latest Thetis version (2.10.3.4 from nov 19th 2023)

It works great now with the Hercules DJ Control Starlight .

One tip, keep your finger on the touch-sensitive-wheel-pad when programming the wheels.
In my case Thetis doesn't respons well on wheel turning when i use the side of the ...

midi save mappings as are broken, and it seems like they have been for ages at least in my test with a version of thetis from before my ownership, at least for 4yrs +

You can see it happening here with a quick test of a very old version : https://youtu.be/bgqjkQrGx94

Do not use save mappings or ...

Note: i deleted midi2cat.xml and started to program the wheels again.
They work great until i do Manage Mappings - Save Mapping As
After that...same result.

Hi, i just repeated it 10 min ago to be sure the issue is still there ... sadly, same result.

Have to rebuild all midi settings again, there's no way to load them back in Thetis.

See Pict 2 then Pict 1
Also midi2cat.xml added

Btw i choosed to do a clean install because i saw no way to delete some ...

Hi Ramdor and all

Installed pre-release 6 yesterday, i'm very happy that my Hercules Serato (DJ Control Starlight) is working fine now.
I also had to start with a new database to get midi working so i'm not sure if this has been solved in the previous pre-relase or by the fresh dBase.
Who cares ...

Hi, no, HamLib has to be installed once.

If you can control Thetis (freq, mode) from within FLdigi than it's working fine already.

If it doesn't do that, than add the directory "C:\Program Files\hamlib-w64-4.5.5\bin" to your Windows PATH
The path (hamlib-w64-4.5.5/bin) depends on the version ...

You're welcome. When you have the FLdigi decoder working then follow Richards advice... install HamLib

Don't forgett to read the install help txt about how to add the directory "C:\Program Files\hamlib-w64-4.5.5\bin" to your Windows PATH
If you encounter problems with the PATH setting in your ...

Hi Terry,

You don't need a VSerialP but a virtual audio cable (VAC) to send the Thetis audio (or any other SDR program) to a decoder.

You can make your feet wet with the Fldigi decoder wich has many decoders besides RTTY: https://sourceforge.net/projects/fldigi and a,
VAC like https://vac ...

make a new thread please

Many thanks for the update Ramdor!
No issues and only 1% cpu load (Thetis only) (i7 gen12)