But obviously, the update causes me to have some questions. First , it appears that we have now gone down from 1.5kW to 1kW (but the "description" and "specs" conflict with one another - of course that is nothing new). Nonetheless, the "new name" is "ANAN G1-1K&qu...

Consider updating to Windows 11?

Mark

Nuno, I'm using this boom with my AT2035 mic, it's quite inexpensive and I like it a lot: https://www.amazon.com/gp/product/B01BWM5E8C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 The mic cable is hidden inside the boom arms, I like that too. I wrapped the springs with bicycle inner tubing to ...

Thanks Scott. So I went searching for some insight as to how the GPL license might be applicable (or not) to any specific derivative work and found this: https://papers.ssrn.com/sol3/papers.cfm?abstract_id=2622355 In that paper, Sections 3.2 and 3.3 appear to be the most relevant to the instant case...

w-u-2-o wrote:I put the question to Olliter on their Facebook page and they are definitely playing it cagey

https://www.facebook.com/Olliter

For those of us who can't access your question on Facebook, can you tell us what you asked and what they replied?

Mark

Many comments there aren't visible to me but I don't have an account there.

Mark

I'm also keen to see how the software is going to be offered for release, given that it clearly incorporates Dr. Pratt's PureSignal algorithm, and especially if it includes cmASIO and/or Richie's new meters.

Mark

I do believe it would also be the only other radio besides the Anan that is capable of true Diversity receive (someone correct me if I'm wrong).

I use Diversity so often that I'll never own another radio that doesn't offer it.

Mark

Dude, You're treading on dangerous ground there. If you aren't prepared to produce evidence that Apache Labs actually made the statement(s) you're claiming they made, then your post is possible grounds for a libel suit against you personally by Apache Labs. Just sayin, Mark [Edited to remove quoted...

I've been using K5FR's VSP Manager for years on multiple computers and Windows versions, it's always worked like a firehose for me.

It's only available from him, send him an email (he's good on QRZ).

It's important to follow the installation and user instructions faithfully.

Mark

Dude, You're treading on dangerous ground there. If you aren't prepared to produce evidence that Apache Labs actually made the statement(s) you're claiming they made, then your post is possible grounds for a libel suit against you personally by Apache Labs. Just sayin, Mark [Edited to remove quoted ...

Paul,

You jogged my memory, Abhi had posted that same chart 3 years ago here:

viewtopic.php?f=3&t=3777&p=14164&hilit=composite+noise#p14164

The link at the top of Abhi's post also makes for interesting reading.

Mark

In fact I do all of my mic processing (except Leveler) in VoiceMeeter. VM Potato has a fully tweakable six-node parametric EQ for all 5 hardware inputs (and every output), and also has a reverb control (no such option is available in Thetis). Here's my mic EQ curve and reverb settings (the small but...

On the 4K display the problem is most likely that you have the Windows scale and layout settings set incorrectly. Go to Settings > Display in Windows and make the appropriate adjustments. Note that a lot of folks have trouble with scaling set to 125%. On my 4K display I have it set to 150% and that...

I've noticed the dotted lines when I use TwoTone to trigger PS correction. When I'm using voice to trigger PS the curves are solid.

Mark

1) What do you think isn't right about that graph?

2) Where did you get that SetPk value?

Mark

I'm wondering what need (or use) is there for CleanRF Splatter View with this rig?

Mark

Where are you getting your information that Feb 19th is a special date?

Mark

Given the claim that AL's email account had been hacked, you might want to verify that the email you received is actually from AL, and the money you sent to the PayPal link is actually going into AL's account.

Just sayin,
Mark

w-u-2-o wrote:AFAIK the Purge Buffers option only affects the spectral display and not any audio.

Thanks, Scott -- that would also explain why that setting is in the Dispay tab instead of the Audio tab.

Mark

Also, it hasn't been explicitly stated in this thread but there's an option in Thetis to purge the buffers on TX:



Mark

Scott, I understand that. My point was that even if the Thetis pipeline is flushed there may still be some not-yet-delivered audio in the upstream pipeline that's going to come through when the PTT is pushed, notwithstanding any particular settings in the General > Options > Options-1 page. Mark

This problem could easily be fixed with a code change to Thetis. I suggest that the transmit audio buffer should be cleared just before a transmission when the PTT is activated. That way any sounds collected my the mic would be purged. I fought this problem and my only solution was to use headphone...

DG9FDA wrote:I just istalled Firmware 2 12.2.1A in my 100D first edition. Now I have "sequence error 264 / 265 (DDC2 Mic)" and an distordet audio. Database reset has no effect.

Any idea?

Have you booted (from a full OFF state) both the radio and your computer?

Mark

Slawomir,

There is a way to "side chain" the audio from Voicemeeter into your DAW by pointing to the "Voicemeeter Insert Virtual ASIO" device in your DAW. That device is enabled in the Voicemeeter System Settings screen:



Mark

ramdor wrote:

K1LSB wrote:Running Protocol_2_v2.2.2 on my 7000 MKII, no issues. Many thanks Rick!

Mark

issues with v2.2.1 ?

I didn't try 2.2.1, I assumed that 2.2.2 was the latest so that's what I grabbed.

Mark

Running Protocol_2_v2.2.2 on my 7000 MKII, no issues. Many thanks Rick!

Mark

I suggest you re-start with a blank database then import a recent database. That might clear the issue (and might not, but it's worth a try).

Mark

That's great news Jim, thanks for posting.

Mark

Darren,

Can your 7000 run Protocol 2 without any problems? (asking for a friend)

Thanks,
Mark