record and play back work fine in the latest thetis 2.10.35.u2 you have to have bypass vac for recording playback checked for it to play , 73 n8obu

ok ill try to explain it when you pick 60 meters say ch one 5.330.500 the radio tunes 5.330.600 if you correct it to what it should be 5.330.500 and leave to 80 meters and come right back it sets it at 5.330.600 again normally if you set the freq you can click threw the channels on 60 meters but wit...

i have a anan 7000 dle mk2 black faced that i bought when i was settling john n8llc"s estate i paid his wife fair market value for it so i could loan it out to a very good friend so he would understand the radios operation while he waited for his anan to be built he has just returned the unit t...

i only use vac never tried the mic plug , the weird part is only on 160 meters it is clean every other band
i did not check the calibration i just looked at my watt meter ,

ok i run a anan 7000 mk2 and know how to run it so i am not a noobie to anan's with that being said time for the back story , i was asked by john n8llc to handle his ham radio estate when he passes away we both knew it was coming soon he has passed i have collected his equipment up to sell, knowing ...

i have the same issue with win 10 i gave up on the issue getting fixed. i just pinned the task manager to the task bar,

removing 2.9.06 and installing a older version corrected the issue. no other changes were made

this set up has worked perfect for years i have more than one hf rig set up in my house moving the anan is not a option , ill be removing 2.9.06 and going back to a older version to see if it clears up the issue .. back to were the vac works properly too. please refrain your self from commenting on ...

i can not get the pure signal to work right using 2.9.06 . i know i am getting feed back from my amp i can see the levels drop a lot on the dup screen if i pull the feed back jumper ,the amp view 1.0 shows no movement once in a great while it might kick in for one tx than back to no correction after...

we talked about this on page 52 of the last thread about 3/4 of the way down the page photos are posted there too , this is not just a i did not save it issue,, RAMDOR stated he made changes that causes this in his post and he could change it back too.

User avatar ramdor Posts: 1114 Joined: Wed Jul 03, 2019 11:07 am Contact: Contact ramdor Re: Thetis v2.8.11 - UPDATES and current issues Report this post Postby ramdor » Tue Mar 08, 2022 6:17 pm vac switches off for a tx profile change, and will switch back on after all the adjustments are made as f...

after a few patches back my thetis will not shut down properly it hangs on please wait ...thetis is closing down.. i have to use ctrl alt del and force it closed,is there a easy way to find out why it is hanging? also is their plans to put the vac back the way it was so it does not break the audio p...

scott lol, yes certainly before he was a boy. Just a bit of info, during the speed up process of 21k9d the vac/txprofile load changed slightly. Prior to 21k9d if a new TX profile was selected that had the same VAC enable state as the one already in use, then the enabled state would be applied anywa...

i noticed the vac routing keeps changing if i change the transmit profile, this was a issue a few builds back than was fixed in the last rc3 release now its broken again in rc4. normally using patchbay Qjack it routes audio from system to ableton lite mixer to thetis than back to system if i change ...