Search found 13 matches
- Sat Jul 22, 2023 2:52 pm
- Forum: Thetis
- Topic: "Clink" Sound When Going From Xmit to Rcv
- Replies: 6
- Views: 1580
Re: "Clink" Sound When Going From Xmit to Rcv
I have been having the same problem. I was able to get the problem to repeat itself fairly consistently. The first fix was to cycle the power tab on Thetis. Finally, under Setup>General>Options>Option-1, I adjusted RX Delay until the problem went away. I could shorten the delay and the problem would...
- Fri Dec 30, 2022 2:42 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: Interfacing Thetis to N1MM?
- Replies: 46
- Views: 27617
Re: Interfacing Thetis to N1MM?
I am using TCP. Are both Thetis and N1MM running on the laptop together? Check to make sure there are no Windows firewall rules impeding operation (compare the laptop to the other Windows machines). Please post screen shots of your N1MM and Thetis setup pages so we can see if there are any errors i...
- Thu Dec 29, 2022 4:24 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: Interfacing Thetis to N1MM?
- Replies: 46
- Views: 27617
Re: Interfacing Thetis to N1MM?
I have N1MM connected to my ANAN-7000DLE MKII using Thetis 2.9.06 on my win 10 desktop and my win11 laptop, but i have not been able to connect using my win 10 laptop. As far as I know, I have N1MM and windows configured like my win 10 desktop. Any suggestions? Tom W0IVJ Did you remember to install...
- Wed Dec 28, 2022 6:09 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: Interfacing Thetis to N1MM?
- Replies: 46
- Views: 27617
Re: Interfacing Thetis to N1MM?
I have N1MM connected to my ANAN-7000DLE MKII using Thetis 2.9.06 on my win 10 desktop and my win11 laptop, but i have not been able to connect using my win 10 laptop. As far as I know, I have N1MM and windows configured like my win 10 desktop. Any suggestions?
Tom W0IVJ
Tom W0IVJ
- Sat Jul 16, 2022 12:16 am
- Forum: Thetis
- Topic: Thetis 2.9 20 dB Attenuator
- Replies: 19
- Views: 3432
Re: Thetis 2.9 20 dB Attenuator
Also, A special thanks to you Scott!!
- Sat Jul 16, 2022 12:13 am
- Forum: Thetis
- Topic: Thetis 2.9 20 dB Attenuator
- Replies: 19
- Views: 3432
Re: Thetis 2.9 20 dB Attenuator
Well, I downloaded Thetis 2.9.06 and P2 2.1.18 and the attenuator issue is still there and now PureSignal will not work. I did find on my computer a Protocol 1: metis_Orion_MkII_v2.7_K5SO_5-4.rbf which is the latest P1 that I have. At this time, I think I will continue to use Thetis with P1, unless ...
- Fri Jul 15, 2022 2:50 pm
- Forum: Thetis
- Topic: Thetis 2.9 20 dB Attenuator
- Replies: 19
- Views: 3432
Re: Thetis 2.9 20 dB Attenuator
My 7000 was shipped on 03 April 2020, so the FPGA change does not effect me. It was shipped with PowerSDR and protocol 1. When I tried Thetis and Protocol 2 shortly after I received the radio, the radio would not work and the consensus at that time was that there was an FPGA timing issue in some rad...
- Wed Jul 13, 2022 11:11 pm
- Forum: Thetis
- Topic: Thetis 2.9 20 dB Attenuator
- Replies: 19
- Views: 3432
Re: Thetis 2.9 20 dB Attenuator
The difference may be Protocol 1 compared to Protocol 2. Both of you are running Protocol 2, whereas I am running Protocol 1. I am stuck on Protocol 1 because of the FPGA timing issue. Has this FPGA timing issue ever been corrected in Protocol 2? Also, if I turn on power on the application with RX2 ...
- Tue Jul 12, 2022 10:53 pm
- Forum: Thetis
- Topic: Thetis 2.9 20 dB Attenuator
- Replies: 19
- Views: 3432
Re: Thetis 2.9 20 dB Attenuator
I am using an ANAN-7000DLE MKII running Protocol 1. I have one of the 7000s that have the FPGA timing problems that prevent me using Protocol 2. Looking at the only block diagram that I have found (at the bottom of the Thetis User Manual edited by G8NJJ), I have determined that there are separate 31...
- Tue Jul 12, 2022 1:27 am
- Forum: Thetis
- Topic: Thetis 2.9 20 dB Attenuator
- Replies: 19
- Views: 3432
Re: Thetis 2.9 20 dB Attenuator
Are there separate attenuators for each receiver?
- Mon Jul 11, 2022 4:24 am
- Forum: Thetis
- Topic: Thetis 2.9 20 dB Attenuator
- Replies: 19
- Views: 3432
Re: Thetis 2.9 20 dB Attenuator
Using Thetis v2.9.0 v64, I disconnected the antenna from Rx1 and Rx2 and set the attenuation to 0 dB. I increased both attenuators in 10 dB steps while monitoring the noise floor of the receivers. The noise floor should increase by 10 dB for each attenuator step change. The 20 dB attenuator on Rx1 i...
- Sun Jul 10, 2022 5:46 pm
- Forum: Thetis
- Topic: Thetis 2.9 20 dB Attenuator
- Replies: 19
- Views: 3432
Thetis 2.9 20 dB Attenuator
In Thetis 2.9 the 20 dB and 30 dB attenuator give the same attenuation on RX1. The attenuator works properly on RX2.
- Tue Jun 02, 2020 4:47 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
- Replies: 185
- Views: 177336
Protocol 2 Firmware Problems
I am running an ANAN 7000DLE MKII with PoweSDR mRX v.3.4.9(3/19/18) using Protocol 1 Orion_MKII_v2.7_K5SO_5-4.rbf. It seems to work perfectly. When I switched to Thetis v2.6.9 (1/25/20) using Protocol 2 Orion_MKII_Protocol_2v1.9.rbf, I experienced what I think is called (elevated noise floor of doom...