That is not a Comparison,

have been using and sending and recommending VK-AMPS sampler for years, stable and in some instances, works better then the Internal OM amp fitted unit, plus other amp manufacturer's factory fitted sniffers,

I have tested VK-AMPS samplers with
SPE, 1.3,1.5, S2/S3, SPE ...

Hi been away from reflector,
OM POWER handles DU-3500AL control,
Transceiver port on OM amp to PC SERIAL PORT (optiplex SFF ) or USB to serial convertor
OM POWER amp rear panel . PC port out TO DU-3500AL TRANSCEIVER IN port on tuner
KENWOOD 38400bd ( set in OM CAT settings)
everything Tracks
I use ...

G2 No face, I also experienced Echo RFI type Rumble with actual NO rfi present, using Balanced Line input via Thetis, multiple ANAN 7000 user's as RX sounding board, very distinct Echo and low distortion,
Distance multi path type Echo and which sounds like RF intrusion, XLR Balanced Input ...

ANAN G2 no face, XLR TRS mic input using Balanced audio,
Original RESPONSE 1530 Pro cable
Balanced XLR into PYLE PHE-400 Dual Eliminator
XLR to TRS wired Balanced to G2
No issues, using either TRS Balanced in,
or MIC Tip INPUT

as Scott mentions, Starts with Basic Station RFI grounding,
NO DAISY ...

I also would to thank Laurence for all of his hours and dedication towards this new project,
simple plain explanations have assisted this Ole Man here, plus many kudos to George W7GES for quick replies.

Super impressed with G2 no face after FW update and XLR Balanced audio working,

Kind Regards ...

# 4. is resolved, Not all 3.5mm Stereo Plugs are equal, stay away from Yum cha,
purchased a PRO AUDIO Gold 3.5mm stereo male plug, ( much better plug with much better insulation ) made new lead, Precise Click on entry to radio stereo socket
plug is locking into socket, el cheepo was not clicking ...

Dennis vk4sx,
new G2 arrived this week, points of interest found, Especially to user's of the EMTRONDV ES-4 Electronic Safety antenna switching,

1. NO TX Monitor

2 . Resolved Default settings on restart, required a few RESTARTING of SW and Importing of DB.

3 . PS-2 settings Under Linearity the ...

Ok NEW CLEAN PC Gen 11 64DDR4, i7 WIN 11 PRO 64
I removed Thetis V2.9
I left Data base etc
ran install Thetis Imported Older DB I had to hard restart,
Thetis is running started with 7000 in Radio, Changed to G2 no problems,
all DB info in correct and after MULTIPLE Restarts Thetis is staring ...

Yes same here Thetis reverting back to First Start No database Imported, will NOT retain bands etc on start,
V2.10 64b ANAN G2, after opening ALL bands in CW and CW Freq,
I about to install THETIS V2.10 on a New Clean WIN 11 PRO 64B, 11TH GEN 64GB DDR4 I will report back shortly.

also no TX ...

Hi a couple of us from Down Under ordered / deposit Early April
a bit early to get ansy,

disposed of New unboxed 2022 7000 DLE MK II for G2 update.
still have 7000 DLE

Dennis vk4sx

Hi Guys, VIS-AIR has been running PURE SIGNAL for quiet some time, CHARLEY C-25 Project also,
plus one other radio from Eastern EU which I can not find the link,

https://charly25-sdr.github.io/

http://rus-sdr.ru/visair-2/

The above offers kit form or pre-built
ELAD Duo-X has a proto type but as ...

Clear your PC CACHE after first attempt, flush it should work,
Tony advised me of cache clearing

Cheers
Dennis vk4sx

the below may look stupid and confusing, any ANAN owners trying to have it all follow may find it useful,

Hello Scott, well this issue has been a sore point for some time now, when inquiring with the manufacture, and a OM retailer, the result was confusing,

OM say 2-3, 3-2, 5-5 for CAT FROM ...

OM-POWER *TRANSCEIVER* port to SERIAL PORT COM 1 on PC , serial cable, 2-3, 3-2, 5-5
set K3 19K2 in OM Cat Menu

Try that
Dennis vk4sx

paid FP on order from 25th NOV 2021, received address check last week,
do not do what I did and query my two ISPS for with holding mail as was suggested,
now I have to settle them down as well,

good luck
Dennis vk4sx

may have nothing to do with it, I changed Mail Clients from Gmail to Yahoo and received a reply with out Over flowing mail box, Tony advised he was seeing all of my mail, even though I was being told it was not delivered,

Cheers
Dennis vk4sx

Hi I am seeing Bounced mail from a Full mailbox?
using support@apache-labs.com,
never seen Full Mailbox here on Gmail,

just thought I would mention it unsure where the issue lies, I think others are seeing same

Dennis vk4sx

Hello Scott, wonderful & valuable input all of the time, I have a question in regards the Hercules DJControl Inpulse 200
would you believe in VK, this unit is much cheaper then the DJ COMPACT Controller,
searched forum in regards the Hercules IMPULSE 200 to see if it worked same as the Compact, not ...

Scott I am going to answer my own question here, I have never seen this happen before, " NO PS2 " Indications
so I shut pc off, removed DC from 7000, took dog for a walk,
returned, fired up PC with Imported DB, applied DC and started 7000,
no PS2 Indications at first then the PS2 green green, red ...

Hello Scott, Dennis vk4sx, I have been using Thetis 2.8.7 since Oct 2020, error free and very reliable, switched gear off and rebooted Optiplex
yerterday, this morning I do not see the PS2 RE/YELLOW, GREEN GREEN Indicators lighting up,
ATT on TX checked, RXBYPASS Checked,
7000 TX alone with ...

Defaults to 60fps, lowered to 30 fps still can not display Native res 1920 x 1600 will pop SFF vid card out tonite,
Scott I have a hardware issue GPU etc

from Properties Events,
,I have a whole list of issues, below is first one, 8 separate issues

Device PCI\VEN_1002&DEV_6611&SUBSYS_21211028&REV ...

Ok Scott I had already switched to DIRECTX from GD+ still seeing this weird happening after I updated AMP drivers,
only appearing in Full Screen mode? it appears to be tied to the screen resolution 1920x1200, when I go to 1920 X 1080 OR 1680 X 1080 everything works,
maybe Video card crook? I have ...

The audio popping in MON was only present in PS ? with Changing colours, red, yellow , Green, plus red msg,
ONLY in Full Screen?
turn off PS no audio popping in TX in MON , FULL SCREEN.
Reduce Screen size, activate PS no Changing PS colours or RED msg in middle of screen?
Go to FULL SCREEN 24 ...

well maybe I have found it, it appears to be related to GUI size on Screen which would point to Graphics driver or chipset?

if I make GUI full screen I see the RED msg etc,
reduce screen size and NO ISSUE with audio Popping etc,
Plus if you have TOMTOM Connect running, it is sapping netframe,
GPU ...

Hello all, Dennis vk4sx, received 7000dle MKII yesterday, no pc embedded,
I have a similar issue to Larry, not quite as involved,
PC is Optiplex i7 4770 20gb DDR5, ssdhdd,
Clean Install of Protocol 2,
install of Thetis 2.6.9,
Audio set up as per Thetis Manual 110-116, through,
I am experiencing ...

Thank you Volker & Scott, I am speaking with Doug and he has consulted Warren,
I am waiting a reply, I am aware of the suggested paths, but they do not comply in this project,

Regards all,
will update as time goes on,
I use OC EXTCTRL on new EESDR SUNSDR2 DX, for external direct couple CAT

bye ...

yep, never found the correct reply yet, have you spotted Band Data info for DB-9 not DB-25?, would rather use Band data, same procedure as EESDR,
I will wait until rig arrives and run software and allocate,
do not want to use RS232 or TTL,
just band data if possible,

I connected EESDR SUNSDR2 DX ...

Hi I am wondering if anyone can assist me with the OC CONROL TAB settings please, I need the the OC PIN OUT descriptions for an SPE 1.5 KFA please,
I am slightly familiar with the SW tab as EESDR SS2DX has similar
I would like to use Band Data hard wire from 7KMKII & SPE,
waiting for 7KMKII at this ...