Thanks Scott I didn't realise that I could move the second screen under the first one and thus enable the mouse to go straight up and down between screens...thanks ! That shows how familiar I am with window 10/11.

I, like many others...I suspect... have a love / hate relationship with windows 11 ...

Hi Scott,
What I’m doing is to have my big wide screen driven only by the ‘radio’ PC and Thetis. A second smaller screen is connected to both Thetis and my ‘shack’ computer using a HDMI switch box with the default to the ‘radio’ PC. I have set it up so that my mouse can travel off the RHS of the ...

Ok, I think that I have the issue that I was having reduced down to being able to cause it and recover from it at will.

To start it I need to have thesis running on both the main screen and the shared screen with the other computer off.
Then I need to start setup and shift the setup screen to ...

Yes thanks Scott I have managed to get into the database manager. I will set-up a new “clean” data base. Along the way more evidence has emerged, I run a shared screen between the radio computer and the “shack” computer via a hdmi switch. My issues appear to be linked to which order the two are ...

Hi to all,
I've run into an annoying issue with startup...when I try to run it from the setup pull-down it goes straight into minimised form and won't expand when I click on its minimised icon.

My setup is 7000dle mark II running V2.10.3.8 and firmware is V2.2.2 protocol 2. The computer is a HP ...

Quick update. I measured that the screen of CAT 7 cable is connected to the chassis of my 7000 mkII. As was my HP EliteDesk PC I 5.

Scott, I agree whole heartedly with you.

I've been in the very high power drives business for over 50 years. Earthing, bonding, grounding have always been of great concern. We've gone from the "audio" days of an earthing tree with everything connected in the correct order. To connecting everything ...

I've been having the occasional sequence error (2 or 3 per hour)...usually 264 or 265. I have ignored them since the radio recovers after a couple of seconds, and I wasn't sure when they had started ......been changing hardware connections and also continuously upgrading Thetis for quite awhile.
I ...

I getting the same from Safari....invalid address.

Bob

Hi all,
I operate once a week on 6 metres FM on a local repeater. I have scaled my output to 50 Watts max and when I operate my tune function (have a slider to set value) I can set the output from zero to 50 Watts. Thats all fine......but when I go to transmit I set my power output (another slider ...

Thanks for the comments. I have had less than stellar results using VAC. So for me cmASIO was a very welcome solution. Is there another way to get good latency without using cmASIO or a proper A to D ?

Vin you're not the only one. I am in the same "boat", I finally shelled out for a "proper" audio interface and have been using cmASIO ever since. The irony is that I don't use the UMC 202HD at all. It sits there on the shelf connected into the computor via its USB connection. I use my favourite USB ...

All noted and accepted. I didn't want to use a GPS directly because having been hit (the house) by lightning twice over the years I'm rather allergic to having too many aerials connected in my shack. So having a OXCO not connected to the outside world was preferable. I could use a GPS yes but its ...

Well I didn't know there was actually a law relating to my issue " Segals law" but its true enough. All I wanted to do was to set up my oscillator (out of a serious GPSDO) to an accurate 10 MHz to use on my 7000 mkII.
It turns out that its not a simple task.

Neither of my GPSDO's are broken. They ...

I agree with you Scott....it shouldn't be happening.
I have changed the the trigger source around to check on other possiblities, but when you end up triggering from the oscillator and the two GPSDO's are moving in different directions at slow but similar speeds it can't be the oscillator causing ...

Tests that I've done imply that the 10MHz signals from the GPS satellites are changing frequency randomly by small amounts.

I've been using an "old" but very stable reference 10 MHz crystal oscillator which is in its own oven to supply the 10 MHz external reference to my 7000 mkII. For some reason ...

Thanks Scott, I had a feeling there was something "basic" that I was missing. Now to go learn something new.

Bob

I have and use a Hercules DJ controller with Thetis on my 7000 mkII. I also use Voicemeeter Banana and am using CMASIO to connect the two. When upgrading Banana to the latest version 2.1.1.1 I noticed that Banana will accept midi inputs. I have tried to set midi commands using by the Hercules ...

Thanks Scott .....thats perfect

Bob

Hi I'm busy contemplating opening up my 7000 mkII to add the jumpers 22 and 24 to ground and put 50 ohms into the 10 meg external reference circuit. Two things.....has anyone got a photo of the board area in question that they can share, and what size/spacing are the jumpers ?

Bob

Please reset all and disregard my last comments........the problem is solved !!!

The cause was that my UMC 202 HD does not like shareing USB ports with anything else. I had it plugged in sharing with a couple of other USB inputs ...keyboard and mouse.

I gave it, its own fast (blue connector) USB ...

I have just purchased a new behringer UMC 202HD and have been trying to get it work with my 7000 mkII.

The issues are audio from the 202 input arrives in CM or Voicemeeter like there is a high wind in the back ground.
The audio from Thetis via CM or via Voicemeeter (banana) is chopped up with ...

Scott adding in the UMC drivers doesn't affect the throttling index so for me Voicemeeter was the culprit.
I'm going to open an other discussion about what I think is my problem.

Bob

Scott, things are getting interesting. I've just booted from original drive that was "parked" (no power to the original drive but power to the clone), that was isolated just prior to adding the UMC drivers and Voicemeeter Matrix.
And when I boot from the earlier drive the throttling index entry is ...

Will do Scott.
First will be to try and roll back my system....I have another bootable drive with a complete earlier backup on. And try and see where the registry got hacked. I have evil thoughts about the Voicemeeter matrix program which I have also been trying. It's possible that Banana and ...

I am just upgrading to a uphoria UMC202hd. I have managed to get things operating with CMASIO and also with Voicemeeter Banana. But just not very well. Using the UMC202 headphone socket as the output I get audio dropouts every couple of seconds, but using the same voicemeeter signal into another ...

Hi I have managed to get myself a UMC202HD, and in the process of installing it and its drivers I have been getting dropouts, hooting and feedback et.c when I try and run things with my Voicemeeter potato. I decided to check if the throttling index tweak is still set on my windows 10 machine i5 ...

Will do thanks

Thanks Scott .....its been a bit frustating to deal with such a simple thing !

Having said that, the best on air reports by far, that I've had, have come from a "humble" computor gaming headset. Not all of us have super fast machines that handle VAC and deliver super low latencys. I hanker after a ...

Well time to get embarassed again.

Between doing the work on the mic line and retesting to reply to your post....I did check and recheck everything and yes for my mic /headphone setup bias can be be applied to the tip of the mike connector. If I isolate the ring connection from the mic/headphone ...