Thanks Scott, I had a feeling there was something "basic" that I was missing. Now to go learn something new.
Bob
Search found 73 matches
- Sun Apr 21, 2024 12:47 pm
- Forum: Macro & MIDI Controller Software, Hardware & Scripts
- Topic: Use Midi for Thetis and Voicemeeter
- Replies: 2
- Views: 210
- Sun Apr 21, 2024 1:46 am
- Forum: Macro & MIDI Controller Software, Hardware & Scripts
- Topic: Use Midi for Thetis and Voicemeeter
- Replies: 2
- Views: 210
Use Midi for Thetis and Voicemeeter
I have and use a Hercules DJ controller with Thetis on my 7000 mkII. I also use Voicemeeter Banana and am using CMASIO to connect the two. When upgrading Banana to the latest version 2.1.1.1 I noticed that Banana will accept midi inputs. I have tried to set midi commands using by the Hercules contro...
- Sat Apr 20, 2024 5:12 am
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Picture of 7000 board showing jumpers 22 and 24
- Replies: 2
- Views: 243
Re: Picture of 7000 board showing jumpers 22 and 24
Thanks Scott .....thats perfect
Bob
Bob
- Sat Apr 20, 2024 2:41 am
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Picture of 7000 board showing jumpers 22 and 24
- Replies: 2
- Views: 243
Picture of 7000 board showing jumpers 22 and 24
Hi I'm busy contemplating opening up my 7000 mkII to add the jumpers 22 and 24 to ground and put 50 ohms into the 10 meg external reference circuit. Two things.....has anyone got a photo of the board area in question that they can share, and what size/spacing are the jumpers ?
Bob
Bob
- Thu Apr 04, 2024 9:23 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: UMC 202 HD interface issues
- Replies: 1
- Views: 389
Re: UMC 202 HD interface issues
Please reset all and disregard my last comments........the problem is solved !!! The cause was that my UMC 202 HD does not like shareing USB ports with anything else. I had it plugged in sharing with a couple of other USB inputs ...keyboard and mouse. I gave it, its own fast (blue connector) USB con...
- Thu Apr 04, 2024 8:59 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: UMC 202 HD interface issues
- Replies: 1
- Views: 389
UMC 202 HD interface issues
I have just purchased a new behringer UMC 202HD and have been trying to get it work with my 7000 mkII. The issues are audio from the 202 input arrives in CM or Voicemeeter like there is a high wind in the back ground. The audio from Thetis via CM or via Voicemeeter (banana) is chopped up with dropou...
- Thu Apr 04, 2024 8:24 am
- Forum: Thetis
- Topic: Changing Windows 10 Network Throttling Index for Better Performance
- Replies: 37
- Views: 55289
Re: Changing Windows 10 Network Throttling Index for Better Performance
Scott adding in the UMC drivers doesn't affect the throttling index so for me Voicemeeter was the culprit.
I'm going to open an other discussion about what I think is my problem.
Bob
I'm going to open an other discussion about what I think is my problem.
Bob
- Thu Apr 04, 2024 3:41 am
- Forum: Thetis
- Topic: Changing Windows 10 Network Throttling Index for Better Performance
- Replies: 37
- Views: 55289
Re: Changing Windows 10 Network Throttling Index for Better Performance
Scott, things are getting interesting. I've just booted from original drive that was "parked" (no power to the original drive but power to the clone), that was isolated just prior to adding the UMC drivers and Voicemeeter Matrix. And when I boot from the earlier drive the throttling index ...
- Wed Apr 03, 2024 4:37 am
- Forum: Thetis
- Topic: Changing Windows 10 Network Throttling Index for Better Performance
- Replies: 37
- Views: 55289
Re: Changing Windows 10 Network Throttling Index for Better Performance
Will do Scott. First will be to try and roll back my system....I have another bootable drive with a complete earlier backup on. And try and see where the registry got hacked. I have evil thoughts about the Voicemeeter matrix program which I have also been trying. It's possible that Banana and matrix...
- Tue Apr 02, 2024 5:26 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Microphone/ Audio Interface Options
- Replies: 74
- Views: 41365
Re: Microphone/ Audio Interface Options
I am just upgrading to a uphoria UMC202hd. I have managed to get things operating with CMASIO and also with Voicemeeter Banana. But just not very well. Using the UMC202 headphone socket as the output I get audio dropouts every couple of seconds, but using the same voicemeeter signal into another spe...
- Tue Apr 02, 2024 4:41 am
- Forum: Thetis
- Topic: Changing Windows 10 Network Throttling Index for Better Performance
- Replies: 37
- Views: 55289
Re: Changing Windows 10 Network Throttling Index for Better Performance
Hi I have managed to get myself a UMC202HD, and in the process of installing it and its drivers I have been getting dropouts, hooting and feedback et.c when I try and run things with my Voicemeeter potato. I decided to check if the throttling index tweak is still set on my windows 10 machine i5. Upo...
- Tue Feb 27, 2024 10:31 pm
- Forum: Macro & MIDI Controller Software, Hardware & Scripts
- Topic: midi function to control rear speaker on 7000
- Replies: 2
- Views: 786
Re: midi function to control rear speaker on 7000
Will do thanks
- Tue Feb 20, 2024 5:06 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Trouble with your microphone? Read this...
- Replies: 23
- Views: 37373
Re: Trouble with your microphone? Read this...
Thanks Scott .....its been a bit frustating to deal with such a simple thing ! Having said that, the best on air reports by far, that I've had, have come from a "humble" computor gaming headset. Not all of us have super fast machines that handle VAC and deliver super low latencys. I hanker...
- Mon Feb 19, 2024 9:05 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Trouble with your microphone? Read this...
- Replies: 23
- Views: 37373
Re: Trouble with your microphone? Read this...
Well time to get embarassed again. Between doing the work on the mic line and retesting to reply to your post....I did check and recheck everything and yes for my mic /headphone setup bias can be be applied to the tip of the mike connector. If I isolate the ring connection from the mic/headphone and...
- Sun Feb 18, 2024 9:26 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Trouble with your microphone? Read this...
- Replies: 23
- Views: 37373
Re: Trouble with your microphone? Read this...
Hi Scott I've been reading through this section carefully since I decided to use "straight" mikes until I can settle my VAC setup and buy a decent DAW (berhinger looks good). I made the usual mistake of trying to key the TX with a connection to the ring of 3.5mm stereo mike and finding tha...
- Wed Feb 14, 2024 4:00 am
- Forum: Thetis
- Topic: Thetis 2.0.3.6 dev_2 issues
- Replies: 13
- Views: 2481
Re: Thetis 2.0.3.6 dev_2 issues
One thing that does not seem to have been reported on is an issue with recording ones transmission and then playing back the result to check on transmitted audio etc. I have been doing tests on the various bands with SSB and found (to my inital horror) that playing back the recorded audio was severe...
- Tue Feb 13, 2024 12:27 am
- Forum: Macro & MIDI Controller Software, Hardware & Scripts
- Topic: midi function to control rear speaker on 7000
- Replies: 2
- Views: 786
midi function to control rear speaker on 7000
The 7000 has a mute function for the rear speakers. Is there a midi function to match that please ?
- Tue Dec 19, 2023 10:30 pm
- Forum: Thetis
- Topic: Current consumption not showing
- Replies: 11
- Views: 1446
Re: Current consumption not showing
.......justoff topic. I can set my gain and offset correctly but I'm not doing something correctly to save the settings. Please where are those settings saved ?
- Wed Oct 25, 2023 11:45 am
- Forum: Thetis
- Topic: TX Profile updates
- Replies: 22
- Views: 3427
Re: TX Profile updates
Understood ! thanks Richie.
Bob
Bob
- Wed Oct 25, 2023 9:43 am
- Forum: Thetis
- Topic: TX Profile updates
- Replies: 22
- Views: 3427
Re: TX Profile updates
HI I would also like to be able to couple PA profiles to transmit profiles. I have several PA profiles that are used to change the gain profile depending on what part of the 6 metre band that I am working. ( I find output power drops as I'm getting to the top of the band.) If not would it be possibl...
- Sun Apr 30, 2023 9:11 am
- Forum: Thetis
- Topic: Thetis v2.9.0.8 - meters and then some more
- Replies: 158
- Views: 49000
Re: Thetis v2.9.0.8 - meters and then some more
Thanks I'll give that a go !
- Sun Apr 30, 2023 12:45 am
- Forum: Thetis
- Topic: Thetis v2.9.0.8 - meters and then some more
- Replies: 158
- Views: 49000
Re: Thetis v2.9.0.8 - meters and then some more
Really loving the new meters !
One thing occurred to me is that using an amp and pure signal.....is there anyway of using the pure signal feedback signal to drive a meter and scaling it so that I can look at the actual station output signal ?
Regards Bob
One thing occurred to me is that using an amp and pure signal.....is there anyway of using the pure signal feedback signal to drive a meter and scaling it so that I can look at the actual station output signal ?
Regards Bob
- Thu Mar 30, 2023 10:08 pm
- Forum: Apache-specific Hardware Discussions
- Topic: power output settings on 6 metres
- Replies: 2
- Views: 874
Re: power output settings on 6 metres
Yes 7000LE MK II about a year old running V2.9.0.6 x64 and P2 v2.1.18.
- Thu Mar 30, 2023 3:56 am
- Forum: Apache-specific Hardware Discussions
- Topic: power output settings on 6 metres
- Replies: 2
- Views: 874
power output settings on 6 metres
Now that propagation is increasing I have finally gotten around to setting the correct drive levels for 6 metre operation. I notice that if I setup a P.A. profile for 6 metres and 100 watts at 50.5 MHz then if I shift to 53.5 MHz for our local FM net what was 100 watts is now only some 30 watts or s...
- Fri Oct 21, 2022 8:25 am
- Forum: Thetis
- Topic: vac buffer overruns during 2 tone testing
- Replies: 12
- Views: 2485
Re: vac buffer overruns during 2 tone testing
Close out report. static IP's set up at 192.168.2.200/201 all working nicely (a friend who is in the business came by and assisted). No change in operation. Final conclusion was, that it was not an IP issue, but rather too many program "fleas" running in the background. Not sure if it was ...
- Thu Oct 13, 2022 7:47 am
- Forum: Thetis
- Topic: vac buffer overruns during 2 tone testing
- Replies: 12
- Views: 2485
Re: vac buffer overruns during 2 tone testing
Drat....puzzlement and relief. The machine started up clean and hasn't put a foot wrong since. I did do a fairly heavy clean up of any programs not actually required to run Thetis before I shutdown yesterday , including any windows programs that the the machine would let me delete, that may have hel...
- Wed Oct 12, 2022 3:21 am
- Forum: Thetis
- Topic: vac buffer overruns during 2 tone testing
- Replies: 12
- Views: 2485
Re: vac buffer overruns during 2 tone testing
Well I've been bouncing around looking for anything that might be a culprit or at least reduce the hiccups in transmission. I'm beginning to think that Pure signal maybe involved is some way. The reason I say this is that under the conditions that I am testing (two tone on pure signal on with ~ 12 w...
- Tue Oct 11, 2022 5:14 am
- Forum: Thetis
- Topic: vac buffer overruns during 2 tone testing
- Replies: 12
- Views: 2485
Re: vac buffer overruns during 2 tone testing
A few months onward and I've gotten around to a few more tests. Using a separate receiver I've been doing some more low power tests (10 ~ 15 Watts) in transmit variously in voice, tune, and 2tone. The hiccup has been happening in all of them with PS on or off not making much difference. From the rec...
- Thu Jul 14, 2022 10:05 pm
- Forum: Thetis
- Topic: vac buffer overruns during 2 tone testing
- Replies: 12
- Views: 2485
Re: vac buffer overruns during 2 tone testing
Don't think so I'm a bit OCD about that. I've installed ferrite cores on all of the supply leads (AC and DC). A ferrite core between the rig output and the amp. And a ferrite core on the amp to rig feedback line. Nothing on the amp output...........but thats a 1 metre double screened coax into the d...
- Thu Jul 14, 2022 7:31 am
- Forum: Thetis
- Topic: vac buffer overruns during 2 tone testing
- Replies: 12
- Views: 2485
vac buffer overruns during 2 tone testing
Hi to the group, I've been working at slowly reducing the latency of my audio in Tx and have reached a point where I have what it consider to be a "nice" stable setup. So I only get buffer over/under flows every few 10's of minutes (and usually when the system over all cpu useage "bli...