I don't have that problem, using 2.10.3.6rc1 for ANAN and latest HL2 release.

Hi Don, answer is YES

Below is how it can be done, but the new database manager can create a separate database for each radio I believe but have not explored this.

Say that Thetis is installed on your C drive, two directories you are going to be working with are :C\Program Files\OpenHPSDR and C ...

Thanks for your post Joe.

Reporting back that I can control the VK-AMP by checking the USB/BCD cable option. PC USB to Amp DB9 for band control.
This provides an alternative to making a OC cable ANAN to Amp for band control.

I used this FTDI cable

In the mentioned topic Richard KI4P was playing with a relay board.

Looks like this should meet my requirement, will have a go and report back.

Cheers
Andrew

Thanks Scott
I did see that and get the impression that its software generated and nothing to do with the hardware OC pins. Correct?

If so would be easier than making a OC cable to get band data into a VK-AMP I just put together. VK-AMP uses Yaesu BCD code.

Question. Is the USB/BCD Cable option a software emulation for the J16 OC pins?

Like to understand how I can make use of this.

Thanks Andrew

I have piHPSDR on two Mint 21.2 PC's and both sound good.

The only difference that I have noticed is lower power output with the same mice gain compared to Thetis.

Phil, piHPSDR v2.3 on a Mint 21.2 PC with 7000 & P2 audio is good.

Andrew

Hi Scott,
I do think that it is the cable, not the conductors but slightly sloppy plug and socket. The spare CAT8 cable is no better, don't like it as it is very stiff.
Using a flat CAT 7 cable but will get a replacement.

For a brief moment I was blaming the Windows update as I read on the forum ...

Have not seen any SEQ errors for almost three years, then two weeks ago I had two consecutive days of errors appearing also Thetis freeze a couple of times. CPU load is very low with Ryzen 7, direct connection to the PC.
Same problem with piHPSDR on linux PC.

Problem went away for a week and now ...

Dennis, thanks for the Initial observations.

It has been disappointing that other G2 owners are not sharing their observations and pictures of the control face version.
Same goes for the Andromeda.

All working fine here, frequencies are saved and TX MON works with headphone on the front.

Overkill, Thetis idles along with Ryzen 7 2700

Windows update reset the throttling index here as well, the builtin setting feature took care off it.

The other thing I notice is the System CPU usage display in Thetis is incorrect now, flickering between 0 to 1%.
In resmon system is using 6%, also according to resmon Thetis is now using 0.3 ...

Yes it is grounded.

Hi Scott, I just came across your question here.
No I haven't set up a dedicated NIC, my desktop has been running perfectly since the throttling index mod, even before that seq errors were rare so I felt no need.

The note book is purely as a temporary back up and is fine for that purpose.

For ...

Daiwa SS-330W is clean

Elan, I can not say that my Lenovo IdeaPad 5 14ARE05 works perfectly as I do see regular SEQ errors. But this has never caused any issues, so for me as a backup only note book it is good enough. I would want something better if it was running my ANAN full time.
It has a 6 core CPU and Thetis uses 10 ...

Thanks Larry,
I hear what you say about not fooling around with old OS. Reason for asking was that I happen to have an old i5-4570 PC and unused Win8 Pro so I thought I might see how it behaves with Thetis. Will not be going online.

Andrew

Thanks Scott

You are the best person here to know if there were any brand specific issues and if you say no one brand stands above the rest then looks like I might be getting another Lenovo.
Locally can pick up at auction QA Failed and repaired Lenovo PC's with warranty for less than half the RRP ...

Hi All,

1. Is there any truth to the assertion that Lenovo brand is a poor choice for ANNAN and Thetis.

I have heard this statement and that Dell is a very good choice.

The reason for asking is that I am considering in getting another PC for my station.

Currently using a Lenovo SFF with Ryzen 7 ...

Hello ULTIMAX

Just wondering if you solved your issue with the 1.3K-FA and Pure Signal.

A friend has been using his 1.3 K-FA and ANAN 10 for 12 months now and pure signal has been working nicely right from the start.
I see his signal every morning, occasionally he runs his IC705 with very obvious ...

More Info
As the notebook is only a back up for Thetis I reset the scaling factor back to 100 and confirmed the issue came back.
Today I was back in the settings and noticed that 150 (scaling) was now being recommended, I set it to that but it was no different.
So again went back to 100 and this ...

Thank you for all of the replies, changing the scaling factor to 105 did the trick, it is a 14" 1920 x 1080 resolution screen.

Cheers
Andrew
VK4DNA

Missing just a line or two at the bottom of the Thetis 2.9 screen no matter how I size it.
Screen shot attached.

Powered up the Notebook today and the Slider was there.

But the display is missing a line or two at the bottom no matter how I size the screen, I will start a new post.

Andrew

Scott,

Thank you again for your speedy replies.

The Tune Slider is there and functioning now on the PC. Will have to revisit the Notebook as I did download new skins on to it just a couple of days ago and still had the problem.

Looks like my brain has the same "Memory Leak" bug as I have been ...

1. Installed Thetis 2.9.06 on my PC and Notebook, in both cases the "Tune Power" slider is missing.
Displayed setting is stuck on 50.

Refer to screen shot

Other things noticed;
2. CPU Usage, only have System option, Thetis not available.
3. Spectrum Display shows ghosting, also seen in the ...

Hi Steve, as Scott said much easier to use USB/Serial adapter. I use my notebook as a backup like that, adapter is very cheap $7AUD.
I ended up making 3 cables and have one spare, unfortunately wrong country to send.

Happy New Year to all.
Andrew

I have had the 7000 about 14 months and overall has been stable for me compared to others experience. I have had Thetis freeze on 3 occasions, I do see SEQ errors at times but not often.
Other than recent upgrade to Win11 and finally making the Cat connection between the PC and Amplifier I haven't ...