What single cal does is it takes a snapshot of a single PS correction calculation and lets that ride. Yes I agree. However in the past Thetis when you did a "single cal" there was no indication that it actually was using that cal. Steve's version let's me know I am in FACT using that sing...

Do not confuse the fact that Steve has modified the UI to illuminate the PS-A button when a Single Cal correction is in effect with PS being in automatic mode. I can see now how this might be (is?) confusing. What's confusing is you stating that Pure Signal works with the 10 E. It has random wide T...

Scott,

It's not something necessary to make PS work on a 10E

Can you please explain how to get PS-A (automatic) working on the 10 e WITHOUT the random intermittent wide TX that happens?

73's

Mike

Scott, In the past, It was not clear when you were in a "Single CAL" or "Pure Signal manual" mode. What Steve's program does is that it gives you the confirmation by changing the PS- A (automatic) button to a PS-M (manual) button, there for confirming your calibration is now not ...

Link fixed by going to the Github page. The problem with the 10E and the Hermes happens randomly . The Pure Signal will loose "Lock" and give you a wide TX sporadically. If you do a single calibration and then use manual (PS-M) . it locks the Pure Signal information and its locked from tha...

Hello Group, There is a Thetis version out that kind of addresses the problem with pure signal with the 10E and the Hermes Lite. It does this by doing a single signal calibration (PS-A) and locking the pure signal in a manual state after that (PS-M). This must be done if you change frequency or powe...

Hello Group, I am posting back to say I have found that using "Single Cal" has fixed the random wide TX. This was suggested by Juergen from the Hermes Lite from google groups. I don't know exactly what "Single Cal" does...but the random not appeared since doing this. Thanks! 73's...

Hello Group, I have a random problem with My 10E and the latest Thetis 2.9.0 and a wide transmit that has something to do with pure signal. If I notice it ( I can see it on the TX spectrum) all that is needed to stop it is to unkey and key back up. When people hear it on the receiving end it's very ...

7000 DLE MKII P1 and 10E P1

73's
Mike WA3O

Scott, I have 2 10E radios. Am I correct in thinking it is an exact replacement for a 10E so it would need at least a filter board. I drive a LDMOS amp with about 1-2 watts and .5 would get me about 600-700 watts and I guess it's Lowpass filter may take care of any harmonics. Thanks for the info. Mi...

Hello Group,

What else is needed with this board to make a complete Transceiver? The Makerfab one needs a filter/amp board (N2ADR)?

Thank you.

Mike WA3O

Hello Group,

This is nothing new however, I have been wondering what the "LED mirror" is on the Setup F/W Set page? There are 10 blocks numbered 1-10.

Thank you.

Mike WA3O

Group,

Someone emailed me a copy of 21k6...

Thank you

73's
Mike WA3O

Richie,

My windows computer died and I had to reload Winblows 10 and I was on 21k6. Can I get a link to download 21k6?

Thank you.

Mike WA3O

more info, if I try to start the program from the terminal by going to the pihpsdr directory and typing pihpsdri I get "error while loading shared libraries :Libgpiod.so.2: cannot open shared object file :no such file or directory" I then did a run sudo apt-get install libgpiod2 And it sta...

Group, I did a fresh Raspberry Pi OS and updated (2022-01-28-raspios-buster-armhf) and installed pihpsdr. sudo apt-get update && sudo apt-get dist-upgrade && sudo apt-get install -f wget -N https://github.com/g0orx/pihpsdr/raw/master/release/pihpsdr.tar tar xvf pihpsdr.tar cd pihpsdr...

Richie,

That would work for me as well however, a simple "right click" on power slider and lock it and turn red that was persistent would work as well.

Thank you for your hard work.

73's
Mike WA3O

Scott,

I have thought of that however, I do want the option to run 100 watts without the external amp.

Thank you

Mike WA3O

Hello Group.

I have a small want/ wish. I would love to see a way to lock the slider for the "Drive" level. I drive a LDMOS amp with about 1 -2 watts and it would be a disaster if I clicked or dragged on the screen accidentally.

Thank you.

Mike WA3O

Scott,

Yes 2 -3 seconds of piercing tone when you have head phones on is a little annoying. I will play with the settings and see if I can speed that up.

Thanks.

Mike WA3O

Scott,

Yes sorry...corrected now. When someone tunes on frequency, it doesn't get completely notched most times. Can you explain what each setting does? Taps...Delay, Gain and Leak?

Thank you.

Mike WA3O

Hello group, I was wondering if anyone can explain to me how to go about adjusting the ANF setting in the latest version of Thetis 2.8.1121K6? I am finding that the ANF doesn't seem to react fast enough and is maybe not as effective as the one on my 7300. I did a search on the forum to no avail. Tha...

Group,

I just got notification for final payment. I ordered mine June 11 2021. Do they email you a tracking number when it's shipped?

Thank you.
Mike WA3O

Guess I am not seeing my new 7000 DLE MKII that I ordered on June 13 2021 order umber AC-3277 any time soon? Good thing I picked up a 10E to keep me playing for a while.

Mike WA3O

Scott, Thank you for the quick response. I bought the 10E used. I assume that the guy before me just hooked it to his network and possibly it was the same type network I have (192.168.1.1). I read in another post https://apache-labs.com/community/viewtopic.php?f=22&t=3723 Where FM5GB states...&q...

Hello group, I just purchased a used 10E and I have it working well with PowerSDRMRX and downgraded to protocol 1 with a network connection wired directly to my router. I removed the network cable from the router and plugged in directly to the computer and rebooted both the radio and the computer an...