A bit late to the party here. Just now setting up cmASIO in 2.10.3.6 dev per the published guidance. Using PreSonus 192 Mobile but Voicemeeter only for digital modes. So far, working as expected with no issues.

Rick
K8EZB

Is there a protocol-2 image for the TRX DUO / Red Pitaya yet?

I am only a few days into using this radio. So far, I am unaware of Protocol 2 firmware being available. Perhaps others can provide a more definitive answer to your question.

Rick
K8EZB

I recently acquired a TRX DUO xcvr from China via AliExpress. This radio is compatible with Thetis out of the box with the addition of appropriate firmware. Protocol 1 firmware is implemented in Linux Alpine, a lightweight version of Linux, and installs via a microSD card. While there is minimal doc...

Just purchased a PreSonus 192 Mobile on Reverb in "new" condition for $175 (including the WU2O seal of approval!); as represented and works well. There are several of these currently listed in the $200-$250 range, and some as high as $599. https://reverb.com/p/presonus-studio-192-mobile-us...

I am using both an EV RE27 and Behringer B1 condenser mic with my 7000DLE Mk II and getting excellent results with both using VAC only. The room in which my station is located is large and not acoustically "friendly" due to high ceilings and bare walls/floors, but the room noise level is g...

Steve has made great progress and done a lot of hard work developing. I would hate to see him stop and be discouraged by someone else's actions.

Strongly agree. I have no idea at this point what is behind Steve's thinking/actions.

Rick
K8EZB

What's the deal with the Parallel Universe and another Branch? Not at all sure what is meant by this cryptic question. However, if you are referring to the Thetis modifications I have made to the 2.9.0.8 and 2.9.0.30 releases to support Acom amps and tuners, please be aware that these are in a loca...

Where did this release come from, please?

Jeff,

When I cloned the G7KLJ repository to my computer about 10 days ago, this was the latest release available. It now appears that Steve has turned off all of his releases.

Rick
K8EZB

Currently running .30 with modifications added to support Acom amps and tuners. No significant issues apparent so far.

Rick
K8EZB

A little more than a year ago I acquired an ANAN 7000DLE Mk II around which to build a new station. My initial focus was on learning the radio; once I had the radio working well, I moved on to build out the station by adding an Acom 1200S amp and companion 04AT tuner which I had owned for several ye...

Thanks, Scott! Yes, Moxa. I was zeroing in on this while you wre typing and now see what is needed (I think). I have used the "flexible" style DB9 connectors previously so this is familiar territory. It is likely I will have some time to think this through more thoroughly as I may have sev...

You need a serial port or a USB to serial adapter on your PC to connect the Lux with the PC. Thanks for the speedy response. This is where things get a little fuzzy for me. Is the cable from the LUX Band Data connector to the serial port a straight through RS-232 cable or something else? My amp is ...

I am intending to acquire a Mercury LUX amp to use with my ANAN-7000DLE Mk II PROVIDED I can use the LUX Band Data connection to have the amp follow xcvr frequency changes. Specifically, I don't want to use RF sensing for this purpose. Anyone doing this? If so, can you describe the connections used ...

Which stand you are using for them 2 displays? I am using two separate monitor mounts for these monitors, both from Amazon: Loctek Monitor Mount Heavy Duty Gas Spring Swing Monitor Arm Desk Mount Stand Fit 10-34 inches Monitor 13.2-33 lbs Weight Capacity (amazon.com) VIVO Single Monitor Desk Mount,...

Current setup at K8EZB. Configured for remoting the radio gear (a la Scott); to be done at a later date.

Rick
K8EZB

This message appended to a Macrium Reflect Free update today: Macrium Reflect v8.0.7279 Date 10th January 2023 -------------------------------------------------------------------------------- Macrium Reflect Free - Service Announcement This is to notify that Macrium Reflect Free Edition is being ret...

I am using two LG 34WN80C-B 34 in. curved "Ultra Wide" (21:9 aspect ratio) hi res monitors (3440x1440) stacked vertically and treated by Win10 as a single screen. These provide lots of screen real estate and use DP connections to an Asus/Intel i5 10500 processor with Intel onboard UHD 630 ...

In my original post on this topic I indicated that I had placed my Telepost sampler/coupler at the output of my Acom 04AT tuner out of concern for the tuner 26VDC power and 60 Hz FSK signaling which appear on the coax between the amp and tuner having implications for PS as a result of appearing on t...

are you using any COMP (turned on with some value)?

Gary,

Thanks for your response. COMP is turned off; using CFC and associated settings only.

RB

Somewhat new AL7K user here with a very satidfactory overall experience with this radio over the few months I have owned it. Mostly past the basics and into refinements at this stage. I am trying to better understand what I an seeing on the spectral display when keying the radio and speaking the fir...

I often get excellent audio reports with several different mics on my AL7K: Behringer B1, EV RE27, PR40, and even the Behringer XM8500, a $25 mic, using virtual audio in every case, and with no outboard audio processing. It does take some experimenting with the Thetis TX audio setup to get mic, oper...

Running Thetis 2.9.0.6. Voltage displays correctly; amps always zero. (7000DLE)

Rick
K8EZB

Better to buy the cables

Success! Cables worked and now have RX audio and Win audio on the PreSonus powered monitors.

Thanks,

RB

Thanks. TRS cables arriving from Amazon tomorrow.

RB

The only other thing you have to do is to go into the Windows sound control panel and select the UMC Main Out as the Windows main output device I dont see a choice in the W10 Sound Playback panel that matches your words. Here are the relevant choices: > OUT 1-2 BEHRINGER UMC 204HD 192k > OUT 1-4 BE...

Rolling the dice on Chinese/Amazon product, but we all do that

I hear you on this issue but batting 1000 so far with this stuff. We'll see!

Thanks - an easy fix!

RB

Oops! These cables: https://www.amazon.com/Elebase-Instrument-Interconnect-Compatible-Amplifier/dp/B08L4TZQ5X/ref=sr_1_1_sspa?adgrpid=1335907194666037&hvadid=83494270953715&hvbmt=be&hvdev=c&hvlocphy=104840&hvnetw=o&hvqmt=e&hvtargid=kwd-83494553866063%3Aloc-190&hydadcr...

Scott, Better to buy the cables ;) Agree! My PreSonus speakers dont have an XLR connector (these are low end monitors), but do have a 1/4 in TRS connector. Looks like these cables will do the job: https://www.amazon.com/PreSonus-Eris-E3-5-Professional-Multimedia/dp/B075QVMBT9/ref=asc_df_B075QVMBT9?t...

That's how I'm set up and it works great (I have a Presonus Studio 192 Mobile and JBL LSR305's).

Thanks, Scott. Was hoping to solve this with a few clicks of the mouse (no additional cables) but maybe not. I'll give this a try.

RB