Ed,
I've been using a G2 with Thetis v2.10.3.4, plus the recent versions prior to 3.4, on CW utilizing 3 different amplifiers, and they all key up perfectly.
Can you explain more about what you are experiencing?

Bob NN5D

I'm running 1300 watts on a G2-100 using v2.10.1 with all the recent updates installed. Using a condenser mic through a phantom 48 volt power supply, I've run on the air tests 80-10 meters, and am experiencing no echo or reverb on the transmit audio. The mic is run directly to the radio on the back ...

FWIW, here's a comparison of the Anan 7000 MKII to the G2-100. I have both radios. The 7000 is over 3 years old, and the G2 is 10 days old. I'm using Thetis v2.10.0 on a homebrew Windows 11 computer. I've configured both radios to where I can switch the same microphone, speakers, antennas, etc betwe...

I am having the same audio issues as stated above. Using v2.10.0 with a G2-100, when turning RX2 on, there is no audio from RX2 without first powering off Thetis, and then back on again. And, when closing RX2 and returning back to RX1, RX1 has no audio output until starting and stopping Thetis. This...

Received an email from Apache Labs support this morning saying, "Yes the software developers are working on a fix and it will be released shortly, The update instructions will be provided once the fix is ready for release. This update will fix the CW keyer issue." I appreciate how responsi...

Using Thetis v2.10.0 with a new G-100, I've experience issues while using CW mode. The radio transmits as if Break-In is turned "On" no matter what the setting might be. Even with Break-In turned off, all CW dots and dashes are transmitted. I've also noted when that happens, I get an ADC1 ...

Using Thetis 2.10.0 with a G2, I am experiencing what I think Carajo was referring to. In CW mode, the radio goes into transmit at anytime when making a dot or dash with a paddle. Even when CW break-In is turned off, the radio will transmit. It's similar to having QSK turned on not matter what the s...

I've been working with a new G2-100 using Thetis for two days. I don't have monitor audio using the headphones or the speaker jacks on the G2. I've not tried VAC.

It's been 11 weeks now for my 7000dle order.

Thanks for the reply, Scott. You're right, I'd want to move the radio to P2 anyway, so that's the best plan. I'll go ahead and do that. The only reason I was thinking about using it on P1 at all was to check it out before committing it to the upgrade.
73 - Bob

I have a 7000DLE MKII running Protocol 2 and v2.9.0.6. I now have the opportunity to acquire a 7000DLE MKIII, which is the new model, running Protocol 1. Would it be feasible to access the new MKIII radio using the same version of Thetis and same database as I'm using with the MKII as long as the tw...

Awesome. Thanks for the quick reply, Scott.
73- Bob

I'm looking to order a new 7000MKIII, and want to utilize Protocol 2. I've been through the forum comments several times. Are we at a point now that one of the 4 revisions as provided by Rick would be dependable?
Thanks,
Bob NN5D

Thinking of getting on the list, too. Wondering what protocols and firmware will ship with the radio? I'm currently using v2.0.0.6 with my 7000DLE.

Thanks,
Bob NN5D

I have zero 0x8899000C errors in my log currently running RC5.

Thanks,
Bob