Ed,
I've been using a G2 with Thetis v2.10.3.4, plus the recent versions prior to 3.4, on CW utilizing 3 different amplifiers, and they all key up perfectly.
Can you explain more about what you are experiencing?
Bob NN5D
Search found 15 matches
- Wed Nov 22, 2023 11:58 pm
- Forum: Thetis
- Topic: NO PTT on CW mode to key amplifier or a transveter using a G-2
- Replies: 5
- Views: 6095
- Sun Sep 03, 2023 5:16 pm
- Forum: G2 Operating System & Applications
- Topic: Balanced Tx echo/reverb
- Replies: 16
- Views: 2506
Re: Balanced Tx echo/reverb
I'm running 1300 watts on a G2-100 using v2.10.1 with all the recent updates installed. Using a condenser mic through a phantom 48 volt power supply, I've run on the air tests 80-10 meters, and am experiencing no echo or reverb on the transmit audio. The mic is run directly to the radio on the back ...
- Mon Aug 07, 2023 11:29 pm
- Forum: G2 Operating System & Applications
- Topic: New G2 Points of Interest etc
- Replies: 13
- Views: 2134
Re: New G2 Points of Interest etc
FWIW, here's a comparison of the Anan 7000 MKII to the G2-100. I have both radios. The 7000 is over 3 years old, and the G2 is 10 days old. I'm using Thetis v2.10.0 on a homebrew Windows 11 computer. I've configured both radios to where I can switch the same microphone, speakers, antennas, etc betwe...
- Wed Aug 02, 2023 9:42 pm
- Forum: G2 Operating System & Applications
- Topic: G2 Sequence Errors & Audio Issues (See Video)
- Replies: 14
- Views: 2173
Re: G2 Sequence Errors & Audio Issues (See Video)
I am having the same audio issues as stated above. Using v2.10.0 with a G2-100, when turning RX2 on, there is no audio from RX2 without first powering off Thetis, and then back on again. And, when closing RX2 and returning back to RX1, RX1 has no audio output until starting and stopping Thetis. This...
- Mon Jul 31, 2023 7:21 pm
- Forum: G2 Operating System & Applications
- Topic: CW Keyer,radio stays in receive mode during transmit in CW mode
- Replies: 11
- Views: 1670
Re: CW Keyer,radio stays in receive mode during transmit in CW mode
Received an email from Apache Labs support this morning saying, "Yes the software developers are working on a fix and it will be released shortly, The update instructions will be provided once the fix is ready for release. This update will fix the CW keyer issue." I appreciate how responsi...
- Sun Jul 30, 2023 9:49 pm
- Forum: Thetis
- Topic: Thetis 2.10.0 Released (G2 users take note!)
- Replies: 48
- Views: 10931
Re: Thetis 2.10.0 Released (G2 users take note!)
Using Thetis v2.10.0 with a new G-100, I've experience issues while using CW mode. The radio transmits as if Break-In is turned "On" no matter what the setting might be. Even with Break-In turned off, all CW dots and dashes are transmitted. I've also noted when that happens, I get an ADC1 ...
- Sun Jul 30, 2023 9:40 pm
- Forum: G2 Operating System & Applications
- Topic: CW Keyer,radio stays in receive mode during transmit in CW mode
- Replies: 11
- Views: 1670
Re: CW Keyer,radio stays in receive mode during transmit in CW mode
Using Thetis 2.10.0 with a G2, I am experiencing what I think Carajo was referring to. In CW mode, the radio goes into transmit at anytime when making a dot or dash with a paddle. Even when CW break-In is turned off, the radio will transmit. It's similar to having QSK turned on not matter what the s...
- Sun Jul 30, 2023 9:23 pm
- Forum: G2 Operating System & Applications
- Topic: No TX Monitor audio
- Replies: 7
- Views: 1684
Re: No TX Monitor audio
I've been working with a new G2-100 using Thetis for two days. I don't have monitor audio using the headphones or the speaker jacks on the G2. I've not tried VAC.
- Tue Mar 21, 2023 9:52 pm
- Forum: Apache Labs News
- Topic: Update
- Replies: 2
- Views: 7407
Re: Update
It's been 11 weeks now for my 7000dle order.
- Wed Oct 12, 2022 10:16 pm
- Forum: Thetis
- Topic: Running two 7000DLE from one database
- Replies: 2
- Views: 756
Re: Running two 7000DLE from one database
Thanks for the reply, Scott. You're right, I'd want to move the radio to P2 anyway, so that's the best plan. I'll go ahead and do that. The only reason I was thinking about using it on P1 at all was to check it out before committing it to the upgrade.
73 - Bob
73 - Bob
- Wed Oct 12, 2022 8:05 pm
- Forum: Thetis
- Topic: Running two 7000DLE from one database
- Replies: 2
- Views: 756
Running two 7000DLE from one database
I have a 7000DLE MKII running Protocol 2 and v2.9.0.6. I now have the opportunity to acquire a 7000DLE MKIII, which is the new model, running Protocol 1. Would it be feasible to access the new MKIII radio using the same version of Thetis and same database as I'm using with the MKII as long as the tw...
- Wed Sep 07, 2022 10:00 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: OLD 7000MKIII Protocol 2 Firmware Topic
- Replies: 57
- Views: 58140
Re: New 7000MKIII Protocol 2 Firmware Topic
Awesome. Thanks for the quick reply, Scott.
73- Bob
73- Bob
- Wed Sep 07, 2022 9:15 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: OLD 7000MKIII Protocol 2 Firmware Topic
- Replies: 57
- Views: 58140
Re: New 7000MKIII Protocol 2 Firmware Topic
I'm looking to order a new 7000MKIII, and want to utilize Protocol 2. I've been through the forum comments several times. Are we at a point now that one of the 4 revisions as provided by Rick would be dependable?
Thanks,
Bob NN5D
Thanks,
Bob NN5D
- Fri Aug 26, 2022 9:05 pm
- Forum: Apache Labs News
- Topic: Introducing the ANAN-8000DLE MKII
- Replies: 101
- Views: 123154
Re: Introducing the ANAN-8000DLE MKII
Thinking of getting on the list, too. Wondering what protocols and firmware will ship with the radio? I'm currently using v2.0.0.6 with my 7000DLE.
Thanks,
Bob NN5D
Thanks,
Bob NN5D
- Sun Mar 13, 2022 6:14 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 982211
Re: Thetis v2.8.11 - UPDATES and current issues
I have zero 0x8899000C errors in my log currently running RC5.
Thanks,
Bob
Thanks,
Bob