Fwiw, I use a Plantronics CS361N It is a RF headset. It is 600 ohm transformer output, perfect. Great RX audio, lightweight and very comfortable. With voice processing tools in Thetis, no one can tell the difference between it and the RE 20, so I got rid of the boom mic setup. It is annoying to be h...

Thank you Riche and Brain for cmASIO. It is working very well on the 7000DLE MKII. I use a Hermes Lite 2+ frequently to keep hours off the Anan. The HL2 is protocol 1 only. At this time I simply got to regedit and change one character on the "ASIOdrivername" file. This prevents Thetis from...

Unbelievable Bryan, it was right in front of me and how long have I been using PS? uhggggg Sorry to bother you.
These are my two favorite features in Thetis.

Thanks, Dan

First I would like to say thank you to Riche and Bryan for all your hard work. Thank you also to every one who have tested and figured this all out. No small number of us have benefited from your knowledge. As an example, I went in and easily configured it, and it worked correctly the first time and...

The procedure I use: Verify wiring is correct using a TRS connector. Record the audio in another receiver, then listen to it. Adjust it until it sounds like me in person Use the recording to verify the scope looks good. Yes I think listening is a better test than looking at the scope. Often times I ...

The list will be vastly increased as I have just fixed an issue where more modern controllers give additional 14bit midi messages for sliders/controllers. The messages for those knobs/sliders arrive in pairs and the midi config was getting confused. As a quick fix we are now ignoring the 14bit mess...

Thank you very Richie I am enjoying it as I type.

73, Dan KM6CQ.

I installed it tonight and it is working well on the 7000DLE and Hermes Lite II Plus.
Thank you Richie.

Dan KM6CQ

Hey, thank you guys I appreciate the information. I did multiple searches and perhaps my search terms were not good enough to narrow it down to what you guys provided. Definitely appreciate it.

Is it possible to do a second install of Thetis to run a second radio such as a Hermes lite simultaneously while the 7000 is running on Thetis?

Thank you, Dan KM6CQ

I changed the throttling index a year ago and I've been running it consistently since then. What I noticed is that the audio ticks on TX that I was seeing and hearing have completely disappeared. The consequence seems to be the Thetis screen will freeze, and then when I click on the power button it ...

I realize this may not be the answer you want, but you might also consider buying a GPS disciplined 10MHz reference oscillator. Leo Bodnar makes a reasonably priced one. The 7000 will automatically use the signal. The 10E's will have to have their internal jumpers configured to use it. Once you hav...

A 1200 watt Lmos device can be purchased for $200. Apache is making a 500 watt radio available for $3750. The 500 watt amp I purchased new for $1900 is now selling for $2700. My first thought is hams are willing to spend $6500 on a legal limit amp and half that on a 500 watt amp. And that’s good for...

Scott,
I just performed this change and it worked. I use to be able to observe a glitch on the 2 tone test about every 10 seconds, it is now gone.
Windows 10 PRO/Build: 19044.1889


Thank you, Dan KM6CQ

Richie,
the new PA settings and profiles are a incredibly useful feature, thank you.

Dan KM6CQ

I have installed 2.9.3 64 and it is working very well.
Thank you Richie.

73, Dan KM6CQ

Thank you Scott,
I ordered what I needed so I will not turn ADC1 into a fuse.

Regards, Dan KM6CQ

This is relative to the Anan 7000DLE MII. When I switch the antenna from RX1 to another transceiver, I then disconnect the 500 foot long wire from RX2. I do this as a precautionary measure as not to overload ADC1. The question is, when RX2 is not enabled in Thetis, is RX2 physically disconnected fro...

Hi Richie,
may I get a link to 219krc5?

Thank you, Dan

Scott, did you mean it safe to tie Ring and Shield together for audio negative and Tip is audio positive? Thanks, Dan Absolutely don't do this. You can damage the amplifier IC. All: this topic is for bugs and issues. If you've got more questions about speaker outputs, take it to this topic: https:/...

[*]Are 1/4 mono cables ok to come from anan direct to xr18 line in, to test the speaker mute/headphone thing? I strongly recommend against this! Caution, warning and danger! The speaker outputs are not mono connectors. They are TRS connectors. Shield is ground. Ring and tip are the output of a brid...

For those radios purchased in December, is the 6 to 8 week lead time on the web site accurate?

Thanks, Dan

Scott, thank you for the reply and that is great. It’s excellent that this feature is built into Thetis. I will use one port for logging one port for a tuner and one port for an amp and one for CW skimmer or what ever digital mode I am using. I have used DDUTIL and the DX commander so if I need more...

How, do I take a cat line from the Anan/Thetis and distribute it to multiple programs at the same time? 

Thanks, Dan KM6CQ