I have a Anan 100 with protocol 1. There is a micro switch with a very small white button on the bottom of the radio. Is that the update switch? According to what I read only the 200d and up have a external switch?

COMES IN THE ORIGINAL BOX AND POWER SUPPLY $475 SHIPPED

CONTACT K9DTC@COMCAST.NET

I sent the radio to Doug and the problem is the step attenuator for ADC2. I want to thank everyone who helped me with this problem.

ok Scott I took the back panel off and everything is in place and tight. I put both RX1 and RX2 receivers on a very strong AM station. with the antenna on ant 1 rx1 signal strength is -7. the same antenna still connected to ant-1 and switch the adc setting to use ant 1 on rx2 receiver and it is -28....

Doug has not got back to me yet. But now that I am a little more familiar with this I see RX2 input on my radio must be defective in some manner. The only way I hear signals on the RX2 receiver is if I change it to the main antenna in the ADC settings.

I did accomplish the 1.9 update and RX2 still seems to be dead.

sounds like a very good idea. It is something I would want done anyway.

version 1.7

I would not know how to do that Scott.

Thanks Taiga. I believe there maybe something wrong with my RX2 input. When I only connect one antenna alone to that jack nothing I do connects it to the receiver?

I emailed Doug w5wc hopefully he will be able to shed light on the my issue. thanks

when I flip flop 00 and 01 the main ant switches to rx2 and now rx1 is dead?

Protocol 2

I must be doing something wrong. There is no combination I can find that connect the RX2 to the receive. I have RX2 checked in the diversity box. I took off the main antenna and only have a ant to RX2 and nothing I do connects it to the receiver?

Hi I have a 200d with Thetis v2.8.11. How do you assign RX2 to ADC2 so I can use Diversity? Thanks Dan k9dtc