Hi Nuno, I am using a rather pricey boom from Heil Sound. There are several much more cost effective ones available on Amazon that should work just fine.

I am using the Presonus Revelator IO.24 and cmASIO with my Anan 7000MKII for the past three months. I use the Muzychenko VAC software with the Revelator IO.24 for the digital modes. The microphone is the Audio-Technica AT2035. My previous audio interface was the UMC202HD, also with cmASIO and VoiceM...

Can cmASIO be used over the internet using remote desktop software? I have been trying to use TeamViewer and Anydesk to listen to my 7000MKII. I have been unsuccessful getting any audio via cmASIO. Interface is UM202HD. The UMC control panel displays the correct sample rate, buffer size and ASIO as ...

I did a forum search on "How to report a Bug" hoping to find a step by step procedure, including links and screen shots to facilitate bug reporting. Information on how to check the bug list and status would be a plus. I believe having a standardized process where the developers, administra...

Mark, I received my Anan in August 2022. Although a complete newbie to SDR radios, I am a big fan of Anan and the community. I applaud the new Saturn and look forward to further announcements. While my comments are based on decades of high tech industry experience, I acknowledge they are nothing mor...

I interpret the Saturn announcement as a dual announcement from Apache Labs. The King, (7000 MK II) is dead, Long live the King (Saturn). Marketing 101: > Raise price of current model ($2995 now $3395) > Slow walk delivery of all current models > Introduce new model at same or marginally higher than...

Scott, you are correct, I am not receiving any spots. I also think your thought about the password makes sense. I will follow up with N6WS and let you what I learn.

Thanks for always responding.

Scott, The pass word is only needed if you want to post a spot or make an announcement. Sent: Friday, February 24, 2023 at 01:35:06 PM PST Subject: N6WS-6 DXSpider Login Hello N6WS-6 DXSpider Node User, You are receiving this email because you logged into DXSpider node N6WS-6 in the past year. The D...

The DXSpider spotting network is encouraging the implementation of tighter security controls over users of the network to post DX Spots or Announcements. Some nodes are starting to require you to enter a password to log into the network. https://wiki.dxcluster.org/index.php/Node_configuration_for_us...

Your search failed, Chip, because I wrote: Open the PA-Filter board schematic. You said you had the schematics. Do you have all the schematics, including that for the PA-Filter board? **************************************************************************************************** Mystery solved...

Your search failed, Chip, because I wrote: Open the PA-Filter board schematic. You said you had the schematics. Do you have all the schematics, including that for the PA-Filter board? **************************************************************************************************** Mystery solved...

I have the schematics for my unit but could not find any reference to the internal fan or the external connector. I checked several times but maybe I missed it. Open the PA-Filter board schematic. Use the search function in Acrobat Reader to search for "fan". Scott, I downloaded the schem...

Apache never provided the info. When I look at the only schematics I have for the 7000 fan circuit (located on the PA-Filter board), it shows the PWM controller version but I believe that Apache no longer ships boards with that controller implemented. You'll have to contact Apache for the correct s...

Abhi, What is the pinout, please? And is there any over-current protection on that connector, i.e. if you short one of the pins to ground will you blow a trace off of the board? Thanks, Scott Has Apache Labs provided this information ? I could not locate the connector on the Schematics.The connecto...

Thanks Paul and Scott for the setup info and helpful explanation of using the Bonar to enable "Wordclock" on an appropriately equipped interface. I currently do not use any external DAW but now know of an additional consideration should I go down that path.

Paul,

Thanks for sharing your configuration parameters. I setup my unit to match yours. How are you using the 48K output?

Thanks Again,

Got it.

Thanks Scott

I purchased the Bodnar 2 port unit and want to add the external GPSDO to my Anan 7000 MKII (August 2022 version). After reading this tutorial several times, especially the most recent posts I am unsure if I need to open the unit and check jumpers or just connect the Bodnar and check the "Using ...

Downloads OK here. No warnings using Microsoft Edge. Paul, W9AC It appears to be a false positive when using Firefox. https://github.com/DH1KLM/Thetis-2.9.0.x/releases/download/2.9.0.7/OpenHPSDR_Skins.exe I can download the file fine on two different computers using Microsoft Edge. Both computers g...

Hi Sig, when trying to download the latest installer Windows defender reports the following: Trojan:Win32/Sabsik.TE.A!ml This program is dangerous and executes commands from an attacker. file: C:\Users\Chip\Documents\Thetis\Skins Installer\OpenHPSDR_Skins.exe I have made three attempts with the same...

Who did your order from? Apache Labs has shipped 7000 MKII units in July for orders placed as recently
as May,2022

All, it is certainly good news to hear the development community is now working on Protocol 2 firmware for this latest revision of hardware. Like Scott, I am neither a software or firmware developer by today's standards. I have spent my entire career in high tech. Early on I worked in hardware engin...

drwil, until we get information from Apache Labs and the development community this is unknown. That said, I have put my order, placed through HRO, for a 7000 on hold until these questions are answered.

Very Concerning in that this appears to be a Downgrade of the FPGA and may impact the ability to connect to the radio using gigabit Ethernet supported in Protocol 2. Also alarming is the lack of notification to the development community. Referencing the Altera documentation, the new FPGA appears to ...

Scott, right you are. Thanks for the reminder. I am awaiting delivery of my 7000 MK II and keeping myself occupied reading all the posts. Hopefully it will shorten my learning curve.

Thanks again.

I understand the best placement of the coupler is between the amp and tuner. Are there any considerations or recommendations for amplifiers with a builtin tuner when using non resonant antennas requiring tuner assistance. Amp is an RFkit-2K+.

Chip - W6MY