Thanks for the YouTube it works GREAT with the Heil PR-40

73
Bret
WX7Y

This post is not much to do with the topic BUT I have a question. If I run Both the COMP and EQ my TX audio is really badly distorted and choppy, If I turn one or the other OFF the Audio works and sounds really good. Maybe this is just the way it is BUT would be good to know. Thanks a lot 73's Bret ...

Sorry, this is a bit long, but this is from a NEW Thetis User with maybe some Newbie suggestions. This thread hits home, and the previous posts are spot on other than to "not try the new Protocol 2" you want to give it a go and by the time you receive your radio Protocol 2 will have some W...

This is about what I have found out today, the 8 band is of NO use on the ANAN or FLEX for that matter other then maybe a MIC Pre-AMP with the PR40 MIC it sounds like crap and has trouble getting rid of the BASE and leveling out the Highs. Maybe on a Mic like the Goldline GM5 that doesn't have so mu...

Hi guys, after returning my new faulty 7000DLE for refund and finding a used but late MK2 and everything looks good to proceed setting up my MIC audio, I was wondering if ANYONE has a W2IHY Equalizer that can give me their settings as a Starting point, I have a PR40 MIC. So, if anyone has any inform...

Hello to the group, Using the TCP/IP server built into Thetis 2.0.9.6 we created these flows that may be of interest to someone. This brings running Remote one step closer I think for those that want to venture down that path. This is ALL on the same network mind you or over a VPN. I have with a lot...

Well, I'm back in the market for an ANAN 7000DLE black radio, I had to return my NEW hardware version 3 radio for a refund, I got HRO to see the light and so they allowed me to send it back to them for refund because they had no Idea when another batch of radios would be in. Thanks for all the prior...

HRO won't take the radio back and swap m, go figure so I guess after waiting since February I will have taken care of this on warrantee, BUT they probably will only fix it if it's running the original firmware revision 1, BUT with the Revision1 firmware the Radio is to FCC specs. knowing my luck. I ...

it is unplugged from the 1/8" jack on the front of the radio I just have the Power Connector and Ethernet is all that is plugged into the radio.

Thanks
Bret

That figures, I guess if no one else is seeing the issue with the REV 3 hardware I think I'll call HRO tomorrow and return it (Preferred) or exchange it for something else, at this point I am NOT a believer in the hype for the ANAN Radios so time to just move on, I'm sure NOT going to wait another 6...

Here are the Pictures, Look like REV2 C using the Line input maxed out (doesn't make a difference) the Birdy is only about 2 DB stronger, and the TX noise floor is 1 DB Lower BUT REV1 clearly shows the 2nd Birdy closer to Zero Beat much stronger. VAC on both Revisions is very as the attached picture...

VAC using DIGU is very quiet as near as I can tell on REV 1, and TX Noise floor is way down at -120DB with no audio present Yes Dynamic MIC is being used, I have tried PR-40, GM-5, Yaesu MH31 with the proper MIC wiring so far. Wish I had an external MIC Pre-amp and see if that make a difference but ...

did another test with REV 2 C, I turned off the 20DB Boost and turned up the MIC gain to approx. 17DB so the Mic levels are -10DB down on the ALC meter (same as with MIC Boost) BUT ALL of the TX grass is substantially higher, and the birdies are buried down in the INCREASED TX Grass, here is the Pic...

Sure, no problem whatsoever, here you go These Pictures taken using the Thetis TX Display and are named for what they are displaying in case they get confused in the upload. 1st Picture "MIC Boost" ON, REV1, MIC unplugged, still there just harder to see because it's in the Noise 2nd Pictur...

In that picture that is Revision 1 and is there all the time, and is WHAT I am talking about, or with the MIC plugged into the radio or not and from 1 to 100% Drive levels. To see it in the TX spectrum on the Radio scroll up 10 or 20 DB on rev 1 and I can just see it out of the grass. On REV 2 looki...

NO, Revision 1 work great No spur, no Digital reverb just great sounding audio, the Audio is NOT being over driven, I use the same Database for Revision 1 as Revision 2 and have tested it with a HARD RESET other than audio levels set correctly. Like I said before the Pictures from the first message ...

Ed. note: I moved these posts from their original topics where they were kind of hidden away since they were not precisely on topic. Initially it was just this one report of a new 7000MKIII acting up, but now there is a similar report of a 100D (starting with the October posts). With this additiona...

I bit the bullet and tested all 4 versions and version "C" for me works well with no errors YET and starts the radio everytime, cross my fingers. Version "A", and "B" gave a lot of errors, Version "D" ran good once it was connected to the radio which failed se...

I am very new, on 3 days in to the ANAN line and Thetis but the firmware version "D" worked 1st try here, I have not seen any errors and every thing is smooth. I followad the instructions preceslie from the APACHE web site and a direct connection cable as I couldn't see the radio through m...

The latest version of Thetis should “just work” with P1 running on it. Try that first, radio should work. To load P2 I recommend using the Programmers instead, download both the P1 and P2 Programmer. Use the P1 Programmer to load the P2 firmware (2.0.0b has been working for me) and you should be of...

My Display settings was set at 113% and I set it for 100% it finially loaded, wow lots of frustration.

Getting the Computer for the new 7000DLE MK3 when it finially shows up from HRO as reading it won't work yet with version 2 firmware and Thetis.

73's
Bret
WX7Y

I my be having the same error on versions 3.4.9 and 3.4.8 but 3.4.7 loads fine.
I will check my Display settings
Here is the error I'm getting
Thanks
Bret
WX7Y

Thank you for the reminder, Looking at the Email's on this subject on the Forum, they will have version 2 ready very soon now the MKIII Radios are being released and there is something to test it on. One way to look at it, The new MKIII will not already be obsolete with end of life components as it'...

Hi Chip, I ordered it from HRO, they said they had 17 back ordered that they are waiting on but as of last Thursday they haven't arrived yet from ANAN so hopefully they will be in soon.

Hello everyone, I am looking for a 7000DLE in excelant condition with version 2 firmware if anyone has one for sale.
I have had one on order since February 2022 but no word yet on when it might ship so I thougt I might check here.
Thanks to the group