Have tried resetting database and also trying older saved versions of Thetis but that did not help. I think it´s a hardware issue or a bad solder point. Have been running only 5-10W drive for over a year so maybe the hardware doesn't like running idling all the time

Hi guys, have a problem that stared occurring a few weeks back. Have Andromeda running Thetis 10.3.6 and protocol 2 v2.2.3. Have a Expert 1.3K-FA amplifier and it only needs about 10W drive. For some reason drive power began dropping to zero in the middle of TX session. This occurs intermitted so I ...

Hi Mark

Here a video of the radio radio...

https://youtu.be/h7eL-OLQPXY?si=BJd14M_PEVhAspoQ

Ben, were and how did you buy the Anvelina PROII/III?

73/Sam

Stefano, I had the same problem with SEQ errors after updating to P2. The problem was solved when I installed the FM patch, see this topic https://community.apache-labs.com/viewtopic.php?f=9&t=4486&p=23175&hilit=73%2FSam#p23175 At least its worth trying. 73/Sam Tnx Sam, until know why y...

Fool me ounce shame on you. Fool me twice shame on me. Anyone reading this forum should know Apache-labs has zero customer relation or support. If they say delivery starts June 10 deliver could be anywhere between 1-12 months. Is no use sending e-mails or posts on this forum, they will not response....

wz3hmt wrote:oh boy, 15 more days until end of June.

Will we see the ANAN-G2-1K shipping soon?

Most probably not.

Maybe Microham Stationmaster can do the job.

https://microham.com/contents/en-us/d133.html

That issue should be solved in v2.9.0.19.

See [https://github.com/sjk7/Thetis-2.9.0/issues/18][/url]

Andromeda -CIV Thetis 2.9.0.8 FW v2.1.26. I have a problem when using TX audio monitor. Pressing MON and TX I get a awful feedback loop. Same as if I would have put the microphone to the speaker and turn up full AF volume. I have to turn Master AF down to 1 or 2 to get rid of the worst feedback loop...

How do you think it got changed from the defaults?

P1 had a different SetPk value that I don't remember. This was several months ago. After installing P2 the old SetPk value was still precent. Clicking Default changed the SetPk to 0.2899 and PS was working fine again.

How and why I don't know.

I had the same problem first time I installed P2. It turned out I had to press Default and change the value in SePk. Should be 0.2899.

Guys, But I don't want to be an unpaid volunteer for Apache-Labs ad inifinitum. Its not like their radios are a fiver. Great business model for them, thou ;-) Steve When someone from the outside enters the forum they discover Apache-Labs flawed business model that relies addicted software users and...

[quote="K1CWD"]The big problem with the Orion architecture is that it is seriously limited in that the "protocol" is implemented in a very difficult to change FPGA. A change for example to a potential "protocol three" would require the support of very good FPGA develope...

Here is my layout. Its a joy everyday when Thetis comes alive.

Richie, what a great job, and what a great software. Its true joy using Thetis and the latest update with the beautiful meters. Its amazingly fantastic and great fun to use. Here is a video I just recorded listening to CY0S 15m CW trying to find RX QRG. [youtube]https://www.youtube.com/watch?v=XkVCo...

Try connecting another receiver to the circuit or different antenna. I had a similar problem some years ago. RX would suddenly drop. A short TX brought RX back. It was a bad connector on the antenna feedline.

When I wired a Heil BM-10 with XLR connector I asked Heil about the XLR pins. The response from Heil was:
PIN1: MIC GND
PIN2: MIC
PIN3: PTT
PIN4: PTT GND

73/Sam

Mine worked from start but I wanted 2 extra monitors so I bought a Unisynk USB hub with 2 HDMI ports and it works great.

73/Sam

Here is my setup for playing .wav files in N1MM. First record the .wav messages you want and put them in the N1MM Wav directory. In N1MM SSB message editor you select path to the messages.

In N1MM audio setup & monitor you select appropriate VAC feed to Thetis.

73/Sam

I can confirm I have the same issue. Have a Andromeda 7000MK2 with Protocol 2 v2.1.26 and Thetis v2.9.0.6. I dont like QSK so for me its not a problem. MOX is never triggered i QSK. Manual MOX CW is transmitted. Same if I run CW from external software like N1MM. CW only works in SEMI.

73/Sam

I use the VK3AMP -55dB coupler with a Expert 1.3K-FA and it works great.
https://www.vk-amps.com/collections/hf-amplifier-kits/products/a-55-db-rf-sampler-2kw-1-8mhz-80mhz-so-239-connectors

73/Sam

Stefano, I had the same problem with SEQ errors after updating to P2. The problem was solved when I installed the FM patch, see this topic
https://community.apache-labs.com/viewtopic.php?f=9&t=4486&p=23175&hilit=73%2FSam#p23175
At least its worth trying.

73/Sam

This is a great patch. You know what the best part is - the patch got rid of all SEQ errors! After installing P2 firmware I got SEQ errors pretty regularly on TX both CW and SSB. Very annoying. Now I have been TX for about an hour on both SSB and CW and the SEQ error log is empty! So this patch did ...

I found at least part of the problem. In PureSignal advanced window there is a Default button. Pressed Default and Pure Signal started working again. However SEQ error 267 still show sometimes. Audio sounds great.

73/Sam

So my serial nr is lower than DX8300497A but I have CIVA at the end. So the question is witch firmware should I download? I don't know. That was the information I was given by Apache. If you have CIVA on the end I would guess the firmware for the EP4CE. I will have to double check with Apache to se...

Yes. Latest topic updating Protocol 2 firmware status is this one (tacked right at the top of the Protocol 2 firmware sub-forum): https://community.apache-labs.com/viewtopic.php?f=32&t=4462 I have a Andromeda with serial nr DX8300407-CIVA. Link to latest topic regarding firmware says the follow...

Please remove the "Stand up for Ukraine" statement that pops up every time Thetis starts. This has nothing to do with ham radio or the ham spirit. Ham radio is one of very few spaces today free from politics, ideology and religion and we should keep it that way. Please read ARRL Amateur Ra...

Well I don´t know the reason. I think there might be a problem when the 7000DLE MK2 and PC with i7 processor share the same DC power source. On all other models SDR and PC have separate power supplies. The volt indications seems fairly accurate. Right now voltmeter say 14.06V on DC input and volt in...

Yes its the same on all modes. Also just by tuning. The shutdown happen on 15m were the PA was not calibrated correctly. Full drive gave 125W output. Have recalibrated PA on all bands to about 95W with 100% drive and increased voltage to 14V so hopefully that will solved the problem. I would guess t...

Nope, there is no fluctuation on voltmeter when running CW. I have never had any RFI problems before. The 0.5-0.9V fluctuation when running 100W is on all bands 160-6m. Running 10W fluctuation is less 0.2-0.4V. Running 1W 0.1-0.3V. Even in RX with 0A it 0.1-0.3V. The load in the I7 processor is only...