I have the G2 plain, i have noticed same thing, particular on 17 and 12. Others ok, but those two not at all linear. Using Thetis.

Not sure about the USB, several of my friends use the wireless with the G2 and 7000 and Hermes series. They use the jabra wireless and have excellent audio. Of course that plugs into the 1/8 mic Jack not the Xlr. Several have had a few issues with the Xlr input.

hey folks
used to have a flex and could use a usb relay board to change antennas when i switched bands. come across the usb/bcd check box under general, oc control,hf tab, dug out a usb board and plugged into the computer and enabled the check box, shows the usb board to select, whan i change bands ...

G2 on qrz now for 3000.00



So color me stupid, lol.

Now show me another one just like that next week, and another one the next week.

I rest my case.

Mark
Anan radios do come up for sale here and elsewhere occasionally. Maybe not as often as other brands of radios. But then again, there have ...

KC2QMA wrote:

KI4P wrote:and sometimes the single click turns the whole thing off, and you think, is it going to start right next time!

Have the G2 for months now and works perfect every time!

Well imagine that.

and sometimes the single click turns the whole thing off, and you think, is it going to start right next time!

Important! Remember to turn off your DC power supply when the radio is not in use. (Or the G2’s internal power supply will overheat due to the internal fan in the G2 not running when radio is in Off/Standby mode)

WOW! first ive heard of turning power supply off, glad i seen these post, always left ...

There is no high resolution image of the G2 on the Apache-Labs website. The front plate has a cutout on its upper edge. Is there a housing latch and an LED there? I'm waiting for the G2 to be delivered and I'm curious what's installed there.
Slawomir



the cutout you see is there for a tab on the ...

not an answer but looking at mine, volts seems to be pretty close, amps close also, only other reading is the system resources, mine indicates system about 2 too 4% usually, it doesnt match task manager in windows, task manager shows anywhere from 15 too 35%. not sure how it measures or even the ...

rsaue wrote:Check out MultiRX…

73 LB2EG Richard

well, kiss my britches. right in front of me and too blind to see it!
Thanks guys!

well, again this may be in wrong thread, SO IF IT IS MOVE IT. im sure im missing a tick of a box somewhere, i want to listen to audio from one vfo in right headphone and from other vfo in left, when working split, im sure it has something to do with the audio tab and vac, can anyone share how to do ...

Read here: https://community.apache-labs.com/viewforum.php?f=16


OK!
I found 1 article that is about 5 years old, only seen 1 thing that I could try, I have cat working, audio to FLDigi, just not sure on tuning, digiu or some other way. will mess with it again tonight
Thanks


This thread has ...

Hi Richard,

I haven't had time to try my G2 out with RTTY but I am using the same Thetis profile I was using with my 7000 DLE MK II so it should work fine.

I am very busy right now as I am finishing the groundwork for a 45 x 60 building and the clock is ticking on the equipment rental (Brand ...

DL8LAQ wrote:Read here: viewforum.php?f=16

OK!
I found 1 article that is about 5 years old, only seen 1 thing that I could try, I have cat working, audio to FLDigi, just not sure on tuning, digiu or some other way. will mess with it again tonight
Thanks

well, seems no one runs RTTY or at least cares to explain,
Thanks anyway

Anyone setup the G2 to do rtty using fldigi yet? I think I have vac working with VMB, got cat reading frequency, the rest I am lost on. If in wrong forum move it,
Thanks

w-u-2-o wrote:I have no idea how they configure the G2 at the factory, but the default for any new Pi is username "pi", password "raspberry".

Thanks! ill remember that. hopefully it wont happen again!

ok, Thetis wouldnt connect to G2 Plain, looked at monitor on PI and it asking for password. kinda lost, dont remember anything about that. so i restarted G2 and everything on PI screen came on then and Thetis connected. any ideas what might have happened? kinda gave my ole heart a sink for a few ...

not sure this post belongs here or by its self. after reading this and doing a PA calibration the second time, once following Richies you tube video and again tonight following procedure in Thetis manual section 3.8, all bands show power slightly over a 100 watts except 10 and 17 meters, they both ...

I sold my Flex and intended to order a G2 100 watt no display radio. I don’t see an ATU option on mention of a tuner. The lack of a built in tuner is now making me wonder about ordering. I had a Flex with no ATU before and had to get an external tuner. I would prefer an internal tuner. Also, I’ve ...

I just went into the folder that had the p2app executable in it and renamed that one file. And gitpull didn't see it and got the new file

I suspect you have done a git pull, built the code (creating a new p2app executable) then done a git pull again.

delete p2app executable and re-do git pull


Thanks from me Laurence, realized I had same error as Volker, I just renamed it and everything fell into place.
Thanks again for you help ...

Hey Guys
tried the update and went better than i expected as far as entering commands, didnt update though, tried twice. showed old version number when i checked this command

cd ~/github/Saturn/sw_projects/P2_app
./p2app
got name and email in, i think. seems hitch came here

cd ~/github/pihpsdr ...

Trucker,

That rumbling is normal, I hear it on my setup all the time. If you click on any active QSO in your panadapter the rumbling will disappear and will stay gone after that.

Mark


Mark,
At least you have proven I am not losing my mind and hearing things!
There was a time when I did not ...

On my G2 plain, selecting Xlr let's mic work. But man what an audio difference, also fixed Mon issue
Richard

Well, thank you Rob, im coming along nicely, have all working pretty much, have pure signal doing fine. the agc seems to be doing fine also, got the transmit profile setup fine, used my flex eq setting as a starting point and fine tuned from there, worked great, still a few little bumps in the road ...

KC2QMA wrote:I too have not been able to get the Line-in or Balanced XLR inputs to work on my G2 no screen model running Thetis 2.10.0?

Have you used the PI program to change inputs?

Ordered a 7000 on 2/25/23, switched to G2 when they announced, received on July 24, 5 month wait
Richard

I'm using a Heil 781. Works great. Mic+ to tip, Mic- to sleve. For now.

Hey John, I THINK, if you have use drive checked, that is adjustable by the slide, if your talking about the window below that where you can put a percentage, that only works when you have use fixed drive, im having some crazy issues also.

i was going to use the use tune slider and it comes up with ...