Very big works, NR2 trained now its exciting!!

I think this is a step that marks a new generation of technology in the ham world, leaving light years behind everything that until yesterday could have come close to thetis. I am truly honored to have been able to witness the birth of this technology!


My feedback is that, the limit is in very ...

New DNR eally very interesting, a new unique and innovative step in the typologies of DNR!!
It is very comfortable, but unfortunately the low signals are covered, even with a threshold of -5. I hope that can increase its sensitivity. Really congratulations!!
I think that no one uses normal NR ...

A strange thing happens to me with SDC, when I transmit I see my transmission appear on multiple frequencies. I tried excluding the dup, the ps, lowering the power to 1w (if I transmit at 0w it doesn't happen). What could it depend on?

Finally the new firmware works without SEQ Errors on my MK3 too! I would very much like to know what it could depend on, given that various theories and possibilities have been floated (closures, temperature, network card compatibility, etc.) and to understand, explained in simple words, what ...

Hi Vin,

[...]

I've noticed a frequency offset when using protocol 2 with a 7000DLE MK3. It is around -160Hz. When using protocol 1, the frequency is correct (within several Hz). I asume that with only changing between protocol 1 and 2 firmware, the frequency should be identical.
Do you also have ...

Could it be that the cmASIO functionality only works with protocol2?
Hi OM,

Yes, that is correct, cmASIO is not supported by protocol_1.
I'll have to check why the icon is still green using protocol 1 (I thought we tested that).
As far as not being able to run protocol_2 on your MKIII, have you ...

I purchased a MOTU M2 card to test the cmASIO functionality, I created the text in regedit and everything worked fine straight away. Unfortunately I had to go back to the protocol1 firmware (I have a 7000 mk3 and the prot2 doesn't work well), the cm icon remains green but I can't hear anything ...

It might be time to try a different Ethernet card. They are cheap enough.

I had a NIC with a Qualcomm chipset that wouldn't work at all with our radios. I had another with an Intel chipset that might have been a counterfeit device, it worked but poorly.


It doesn't depend on the network card, in ...

I changed the speed of the ANAN dedicated ethernet card from “auto negotiation” to 100mbps.
With the original P2 fw it doesn't work as I imagined (mine is 2.1.12 a) but thanks to this I discovered something interesting.
Going back to “autonegotiation” or higher settings (2.5 and 10 GBps) the system ...

When I was having a issue with my 7000dle mkIII and protocol II I went into the network card setting and reduced it down to 100mbps with a bandwidth of 768000. And I still run 768000 just to keep it tamed. I no longer have to run the nic card at limited 100mbps after the latest firmware. I hope ...

Hi Vin,



It would be interesting to see how it runs on your ANAN. It runs fine on my
Cyclone V based Orion2 board:

https://www.dropbox.com/scl/fi/xghgifzswfwio4zkf9j0g/Orion_MkIII_P2_CV_21.9_100T.rbf?rlkey=xmpm7v1ndjmslwxezjg01370a&dl=0

BTW, could you let me know which P2 gateware images you ...

I hope this is not the case, not even the worst Chinese manufacture would have certain defects. However, I would feel like excluding it, since I made the long transmission times at very low powers (not even 1w) and with the P1 the problem does not arise

EDIT: Correction, I got confused with the versions



With 2.1.12:
The situation worsens heavily. As soon as it is turned on, Error 8 constantly appears in RX.
As soon as I send, many other errors appear right from the start.
It's impossible to get working, so I went back to 2.1.7. Now I run 2.8 of ...

Jay--AFAIK, you are the only person with the most recent FPGA that has reported an intractable problem with a GigE connection.

I'm pretty sure it's my same problem, stay tuned!
https://community.apache-labs.com/viewtopic.php?f=32&t=4485&p=23218#p23218

Do you get a lot of errors?

Oh yes, in ...

it would be nice to be able to pass audio tx/rx through it as well, why is it not implemented?

I am going to try a PS test today. Hopefully if I get time. Are any of you guys operating with a new mk3 chip and had any success?

Jay n2gq
Jay--AFAIK, you are the only person with the most recent FPGA that has reported an intractable problem with a GigE connection.

I'm pretty sure it's my same ...

kk Scott, many tnx

A strange thing happened to me. After about an hour of activity (a lot of time in transmission) I noticed the noisefloor go up and stay 7-10dB higher than usual. I thought it was caused by some electrical devil, but even by detaching the antenna the noise remained and gradually decreased after a few ...

Hi all, I hope to use the correct section for the question I'm going to ask.
Searching the forum I have some indications from Ernst that could be useful but I don't know how to implement them.
I would like to be able to assign the "voicekeyer" function to some keys (I've always used the Yaesu keypad ...

Stefano, I had the same problem with SEQ errors after updating to P2. The problem was solved when I installed the FM patch, see this topic
https://community.apache-labs.com/viewtopic.php?f=9&t=4486&p=23175&hilit=73%2FSam#p23175
At least its worth trying.

73/Sam

Tnx Sam, until know why you ...

Thanks for the reply.
I have no idea what “timing closure” means, but I trust what you say, since now with the P1 everything works (or at least seems) correctly.
I don't intend to make any hardware changes, I don't have the presumption to improve what the design engineers have come up with, that's ...

Edit 2024_02_12: With the new firmware 2.2.2 (for 5CEFA) it seems that the tx finally goes well, there were no more transmission gaps/glitch


RTX: Anan 7000Dle MK3 with Cyclone V FPGA connected via switching eth 1GB
PC: Intel i7 penultimate generation 3.6Ghz- 16GBram

It comes out of the box with ...

Surprise, surprise

Hi! I received my mk3 this weekend and after reading this fantastic forum to understand its function logic I want to update to p.2. All ok with the bootloader, all ok with the fw reviews... good, I can proceed!
The installation goes well, without any problems (and it is here ...