Search found 21 matches

by StefanoAlvaro
Mon Feb 26, 2024 1:40 pm
Forum: Digital ("Virtual") Audio
Topic: Thetis > SDC using VAC - Ghost Signals
Replies: 4
Views: 892

Re: Thetis > SDC using VAC - Ghost Signals

A strange thing happens to me with SDC, when I transmit I see my transmission appear on multiple frequencies. I tried excluding the dup, the ps, lowering the power to 1w (if I transmit at 0w it doesn't happen). What could it depend on?
by StefanoAlvaro
Fri Feb 09, 2024 3:36 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Firmware fix for RF appearing on RX only ports
Replies: 75
Views: 6637

Re: Firmware fix for RF appearing on RX only ports

Finally the new firmware works without SEQ Errors on my MK3 too! I would very much like to know what it could depend on, given that various theories and possibilities have been floated (closures, temperature, network card compatibility, etc.) and to understand, explained in simple words, what change...
by StefanoAlvaro
Tue Feb 06, 2024 3:58 pm
Forum: Protocol 2 Firmware (all radios)
Topic: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1
Replies: 35
Views: 29842

Re: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1

Hi Vin, [...] I've noticed a frequency offset when using protocol 2 with a 7000DLE MK3. It is around -160Hz. When using protocol 1, the frequency is correct (within several Hz). I asume that with only changing between protocol 1 and 2 firmware, the frequency should be identical. Do you also have th...
by StefanoAlvaro
Mon Jan 15, 2024 8:04 am
Forum: Digital ("Virtual") Audio
Topic: cmASIO feature in Thetis
Replies: 232
Views: 78780

Re: cmASIO feature in Thetis

Could it be that the cmASIO functionality only works with protocol2? Hi OM, Yes, that is correct, cmASIO is not supported by protocol_1. I'll have to check why the icon is still green using protocol 1 (I thought we tested that). As far as not being able to run protocol_2 on your MKIII, have you che...
by StefanoAlvaro
Sat Jan 13, 2024 3:20 pm
Forum: Digital ("Virtual") Audio
Topic: cmASIO feature in Thetis
Replies: 232
Views: 78780

Re: cmASIO feature in Thetis

I purchased a MOTU M2 card to test the cmASIO functionality, I created the text in regedit and everything worked fine straight away. Unfortunately I had to go back to the protocol1 firmware (I have a 7000 mk3 and the prot2 doesn't work well), the cm icon remains green but I can't hear anything anymo...
by StefanoAlvaro
Mon Oct 02, 2023 1:43 pm
Forum: Protocol 2 Firmware (all radios)
Topic: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1
Replies: 35
Views: 29842

Re: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1

It might be time to try a different Ethernet card. They are cheap enough. I had a NIC with a Qualcomm chipset that wouldn't work at all with our radios. I had another with an Intel chipset that might have been a counterfeit device, it worked but poorly. It doesn't depend on the network card, in the...
by StefanoAlvaro
Mon Oct 02, 2023 7:34 am
Forum: Protocol 2 Firmware (all radios)
Topic: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1
Replies: 35
Views: 29842

Re: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1

I changed the speed of the ANAN dedicated ethernet card from “auto negotiation” to 100mbps. With the original P2 fw it doesn't work as I imagined (mine is 2.1.12 a) but thanks to this I discovered something interesting. Going back to “autonegotiation” or higher settings (2.5 and 10 GBps) the system ...
by StefanoAlvaro
Thu Sep 28, 2023 12:26 pm
Forum: Protocol 2 Firmware (all radios)
Topic: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1
Replies: 35
Views: 29842

Re: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1

When I was having a issue with my 7000dle mkIII and protocol II I went into the network card setting and reduced it down to 100mbps with a bandwidth of 768000. And I still run 768000 just to keep it tamed. I no longer have to run the nic card at limited 100mbps after the latest firmware. I hope som...
by StefanoAlvaro
Mon Sep 25, 2023 1:36 pm
Forum: Protocol 2 Firmware (all radios)
Topic: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1
Replies: 35
Views: 29842

Re: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1

Hi Vin, It would be interesting to see how it runs on your ANAN. It runs fine on my Cyclone V based Orion2 board: https://www.dropbox.com/scl/fi/xghgifzswfwio4zkf9j0g/Orion_MkIII_P2_CV_21.9_100T.rbf?rlkey=xmpm7v1ndjmslwxezjg01370a&dl=0 BTW, could you let me know which P2 gateware images you hav...
by StefanoAlvaro
Mon Aug 14, 2023 1:41 pm
Forum: Protocol 2 Firmware (all radios)
Topic: ANAN-7000 & Andromeda EP4CE & 5CEFA P2 Beta (QSK Fix)
Replies: 14
Views: 7111

Re: ANAN-7000 & Andromeda EP4CE & 5CEFA P2 Beta (QSK Fix)

I hope this is not the case, not even the worst Chinese manufacture would have certain defects. However, I would feel like excluding it, since I made the long transmission times at very low powers (not even 1w) and with the P1 the problem does not arise
by StefanoAlvaro
Mon Aug 14, 2023 1:00 pm
Forum: Protocol 2 Firmware (all radios)
Topic: ANAN-7000 & Andromeda EP4CE & 5CEFA P2 Beta (QSK Fix)
Replies: 14
Views: 7111

Re: ANAN-7000 & Andromeda EP4CE & 5CEFA P2 Beta (QSK Fix)

EDIT: Correction, I got confused with the versions With 2.1.12: The situation worsens heavily. As soon as it is turned on, Error 8 constantly appears in RX. As soon as I send, many other errors appear right from the start. It's impossible to get working, so I went back to 2.1.7. Now I run 2.8 of the...
by StefanoAlvaro
Sun Jul 30, 2023 2:06 pm
Forum: Network Connections & Network Hardware
Topic: Sequence errors during transmit
Replies: 39
Views: 13338

Re: Sequence errors during transmit

Jay--AFAIK, you are the only person with the most recent FPGA that has reported an intractable problem with a GigE connection. I'm pretty sure it's my same problem, stay tuned! https://community.apache-labs.com/viewtopic.php?f=32&t=4485&p=23218#p23218 Do you get a lot of errors? Oh yes, in ...
by StefanoAlvaro
Fri Jul 28, 2023 7:28 am
Forum: Network Connections & Network Hardware
Topic: CAT over TCP/IP rocks! And so does Hamlib!
Replies: 11
Views: 6829

Re: CAT over TCP/IP rocks! And so does Hamlib!

it would be nice to be able to pass audio tx/rx through it as well, why is it not implemented?
by StefanoAlvaro
Fri Jul 28, 2023 6:36 am
Forum: Network Connections & Network Hardware
Topic: Sequence errors during transmit
Replies: 39
Views: 13338

Re: Sequence errors during transmit

I am going to try a PS test today. Hopefully if I get time. Are any of you guys operating with a new mk3 chip and had any success? Jay n2gq Jay--AFAIK, you are the only person with the most recent FPGA that has reported an intractable problem with a GigE connection. I'm pretty sure it's my same pro...
by StefanoAlvaro
Wed Jul 26, 2023 9:27 am
Forum: Digital ("Virtual") Audio
Topic: Voicekeyer and streaming
Replies: 4
Views: 18536

Re: Voicekeyer and streaming

kk Scott, many tnx
by StefanoAlvaro
Mon Jul 24, 2023 8:40 pm
Forum: Thetis
Topic: Thetis 2.10.0 Released (G2 users take note!)
Replies: 48
Views: 9679

Re: Thetis 2.10.0 Released (G2 users take note!)

A strange thing happened to me. After about an hour of activity (a lot of time in transmission) I noticed the noisefloor go up and stay 7-10dB higher than usual. I thought it was caused by some electrical devil, but even by detaching the antenna the noise remained and gradually decreased after a few...
by StefanoAlvaro
Mon Jul 24, 2023 8:34 pm
Forum: Digital ("Virtual") Audio
Topic: Voicekeyer and streaming
Replies: 4
Views: 18536

Voicekeyer and streaming

Hi all, I hope to use the correct section for the question I'm going to ask. Searching the forum I have some indications from Ernst that could be useful but I don't know how to implement them. I would like to be able to assign the "voicekeyer" function to some keys (I've always used the Ya...
by StefanoAlvaro
Fri Feb 03, 2023 12:22 pm
Forum: Protocol 2 Firmware (all radios)
Topic: ANAN 7000 MK 3 - Ciclone V- P.2 issues
Replies: 7
Views: 3647

Re: ANAN 7000 MK 3 - Ciclone V- P.2 issues

Stefano, I had the same problem with SEQ errors after updating to P2. The problem was solved when I installed the FM patch, see this topic https://community.apache-labs.com/viewtopic.php?f=9&t=4486&p=23175&hilit=73%2FSam#p23175 At least its worth trying. 73/Sam Tnx Sam, until know why y...
by StefanoAlvaro
Mon Jan 30, 2023 8:14 am
Forum: Protocol 2 Firmware (all radios)
Topic: ANAN 7000 MK 3 - Ciclone V- P.2 issues
Replies: 7
Views: 3647

Re: ANAN 7000 MK 3 - Ciclone V- P.2 issues

Thanks for the reply. I have no idea what “timing closure” means, but I trust what you say, since now with the P1 everything works (or at least seems) correctly. I don't intend to make any hardware changes, I don't have the presumption to improve what the design engineers have come up with, that's o...
by StefanoAlvaro
Sun Jan 29, 2023 6:20 pm
Forum: Protocol 2 Firmware (all radios)
Topic: ANAN 7000 MK 3 - Ciclone V- P.2 issues
Replies: 7
Views: 3647

ANAN 7000 MK 3 - Ciclone V- P.2 issues

Edit 2024_02_12: With the new firmware 2.2.2 (for 5CEFA) it seems that the tx finally goes well, there were no more transmission gaps/glitch RTX: Anan 7000Dle MK3 with Cyclone V FPGA connected via switching eth 1GB PC: Intel i7 penultimate generation 3.6Ghz- 16GBram It comes out of the box with fw ...
by StefanoAlvaro
Tue Jan 17, 2023 8:33 pm
Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
Topic: IMPORTANT: different firmware for 7000DLE MKIII/Andromeda/8000MKII hardware shipped after 1 January 2023
Replies: 9
Views: 7984

Re: IMPORTANT: different firmware for 7000DLE MKIII/Andromeda/8000MKII hardware shipped after 1 January 2023

[b]Surprise, surprise Hi! I received my mk3 this weekend and after reading this fantastic forum to understand its function logic I want to update to p.2. All ok with the bootloader, all ok with the fw reviews... good, I can proceed! The installation goes well, without any problems (and it is here t...

Go to advanced search