Search found 139 matches

by n2gq
Thu Mar 14, 2024 1:49 pm
Forum: Protocol 2 Firmware (all radios)
Topic: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1
Replies: 35
Views: 29665

Re: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1

Yes, port shunting was one of the first things I did when i first suspected RF and that didn't solve the issues. Thanks for your suggestion a while back. I apologize for not confirming it was already done back months ago when you originally suggested it. Yes my friend told me as well as another gen...
by n2gq
Tue Mar 12, 2024 7:04 pm
Forum: Protocol 2 Firmware (all radios)
Topic: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1
Replies: 35
Views: 29665

Re: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1

KD1GA wrote:I'm officially claiming victory:). Since I updated to the new firmware to fix the RF on the RX port and also went to CM ASIO Protocol 2 has worked perfectly for two months. Maybe that little bit of RF was messing with the firmware timings. Vin KD1GA


Did you terminate the open ports as well?
by n2gq
Tue Feb 27, 2024 1:34 pm
Forum: Thetis
Topic: Wishlist >>Transmit noise reduction.
Replies: 16
Views: 1424

Re: Wishlist >>Transmit noise reduction.

I am using an EV RE27 mike with a foam pop filter and work about 1 - 3 inches and talk in a normal voice. It helped my shack fan noise quite a lot. No breath noise and of course with that mike no proximity problems. Off topic - I have been using that mike thru a shure low impedance to high impedanc...
by n2gq
Fri Feb 23, 2024 6:28 pm
Forum: Digital ("Virtual") Audio
Topic: cmASIO feature in Thetis
Replies: 232
Views: 78640

Re: cmASIO feature in Thetis

Presonus Studio 26c and Voicemeeter Potato work really well together.
by n2gq
Fri Feb 23, 2024 1:57 pm
Forum: Thetis
Topic: Wishlist >>Transmit noise reduction.
Replies: 16
Views: 1424

Re: Wishlist >>Transmit noise reduction.

You can use any number of other solutions to acomplish this, not sure I want resources spent implementing something like this natively in Thetis. Look at NVIDIA Broadcast, or any other number of solutions. What resources are you referring to? Computer? Development resources Yes, I understand. I kno...
by n2gq
Fri Feb 23, 2024 12:00 am
Forum: Thetis
Topic: Wishlist >>Transmit noise reduction.
Replies: 16
Views: 1424

Re: Wishlist >>Transmit noise reduction.

rdwing wrote:You can use any number of other solutions to acomplish this, not sure I want resources spent implementing something like this natively in Thetis.

Look at NVIDIA Broadcast, or any other number of solutions.


What resources are you referring to? Computer?
by n2gq
Tue Feb 20, 2024 11:39 pm
Forum: Thetis
Topic: Using MOX vs PTT different transmit eq
Replies: 10
Views: 761

Re: Using MOX vs PTT different transmit eq

That's a beautiful connector! No stop on shell so it pushed out the connector you lose ground. But that was not my problem the shield was disconnected. Those are very easy to over tighten. There should be a small gap between the barrel and the 90 Degree body. If you over tighten you suck the intern...
by n2gq
Tue Feb 20, 2024 7:36 pm
Forum: Thetis
Topic: Using MOX vs PTT different transmit eq
Replies: 10
Views: 761

Re: Using MOX vs PTT different transmit eq

w-u-2-o wrote:That's a beautiful connector!


No stop on shell so it pushed out the connector you lose ground. But that was not my problem the shield was disconnected.
by n2gq
Tue Feb 20, 2024 7:06 pm
Forum: Thetis
Topic: Using MOX vs PTT different transmit eq
Replies: 10
Views: 761

Re: Using MOX vs PTT different transmit eq

Okay it has something to do with the connector I'm using at the front of the radio. Ground disconnected cold solder joint. The old wiggle test worked. :lol: https://community.apache-labs.com/download/file.php?id=3393 don't buy this connector the body disconnects from the trs if you tighten the shell.
by n2gq
Tue Feb 20, 2024 6:03 pm
Forum: Thetis
Topic: Using MOX vs PTT different transmit eq
Replies: 10
Views: 761

Re: Using MOX vs PTT different transmit eq

Okay this seems to happen only with my electret mic. It seems that the audio is lower if I use the MOX button. But If I use my dynamic mic there is no difference in xmit audio level whether I use physical ptt or mox. Maybe something with bias voltage switching in. Assuming you mean "PTT switch...
by n2gq
Mon Feb 19, 2024 7:59 pm
Forum: Thetis
Topic: Using MOX vs PTT different transmit eq
Replies: 10
Views: 761

Re: Using MOX vs PTT different transmit eq

Okay this seems to happen only with my electret mic. It seems that the audio is lower if I use the MOX button. But If I use my dynamic mic there is no difference in xmit audio level whether I use physical ptt or mox. Maybe something with bias voltage switching in.
by n2gq
Sun Feb 18, 2024 11:54 pm
Forum: Thetis
Topic: Using MOX vs PTT different transmit eq
Replies: 10
Views: 761

Re: Using MOX vs PTT different transmit eq

I cannot duplicate your results. Is the DEXP and everything else 100% identical across the board except for the state of VOX? What happens when you use MOX with VOX enabled? Yes everything is the same I have checked the eq, mic, dexp and xmit filter. I forgot to mention that this is with mic plug i...
by n2gq
Sun Feb 18, 2024 2:54 pm
Forum: Thetis
Topic: Using MOX vs PTT different transmit eq
Replies: 10
Views: 761

Using MOX vs PTT different transmit eq

When using MOX vs PTT I get a different transmit eq during transmit It sounds thinner or not processed/adjusted. I discovered this while adjusting the dexp.

Using Thetis v2.10.3.5 x64 7000dle mkIII protocol2

I reset database but the same.
by n2gq
Sun Feb 18, 2024 2:17 pm
Forum: Thetis
Topic: Wishlist >>Transmit noise reduction.
Replies: 16
Views: 1424

Re: Wishlist >>Transmit noise reduction.

"In addition to what Scott advises above: a strongly cardioid dynamic mic, with "variable-d" characteristics (or equivalent) will go a long way in taming down a noisy shack (like mine)."


Wow variable-d is interesting. Thanks I never knew.
by n2gq
Thu Feb 15, 2024 2:26 pm
Forum: Thetis
Topic: Wishlist >>Transmit noise reduction.
Replies: 16
Views: 1424

Re: Wishlist >>Transmit noise reduction.

It is a useful request and allowing NR2 on TX would help in noisy situations. DEXP won’t help high levels of room noise. The SunSDR TX noise reduction works well. If you have the Blue USB microphone with their tools it will also work well. Doug I currently use the Behringer bigfoot. It only has an ...
by n2gq
Wed Feb 14, 2024 2:36 pm
Forum: Thetis
Topic: Wishlist >>Transmit noise reduction.
Replies: 16
Views: 1424

Re: Wishlist >>Transmit noise reduction.

I use the downward expander but just doesn't cancel the noise in the shack. It will cancel 30dB worth of your shack noise. How much more do you need? In addition to what Scott advises above: a strongly cardioid dynamic mic, with "variable-d" characteristics (or equivalent) will go a long ...
by n2gq
Tue Feb 13, 2024 9:54 pm
Forum: Thetis
Topic: Wishlist >>Transmit noise reduction.
Replies: 16
Views: 1424

Re: Wishlist >>Transmit noise reduction.

I use the downward expander but just doesn't cancel the noise in the shack. I am going to treat my room with some sound panels My al-82 amp is the challenge. I do talk close to the mic so not to gain much. I like keeping this simple hence the wishlist, but I can use sonar from steelseries which has ...
by n2gq
Tue Feb 13, 2024 5:03 pm
Forum: Thetis
Topic: Wishlist >>Transmit noise reduction.
Replies: 16
Views: 1424

Wishlist >>Transmit noise reduction.

Wishlist.
Noise reduction on transmit audio. I know it must be complex to write something like that into thetis. But I heard my buddies noise reduction in his sun sdr radio via software and it was good. It blanked out all the noise in the background. Pretty cool, similar to sonars noise reduction.
by n2gq
Mon Feb 05, 2024 10:11 pm
Forum: Upgrading/Downgrading
Topic: Is Bootloader working OK for people who are running Windows 11?
Replies: 23
Views: 5524

Re: Is Bootloader working OK for people who are running Windows 11?

Great, glad you got it going. I know it can be frustrating but when one thing fails you back up and try something else. Also, you posting results hopefully helps someone else. 73’s Joe WD5Y I figured it out this afternoon when I went to try with the renamed file as you suggested and the radio was i...
by n2gq
Mon Feb 05, 2024 9:33 pm
Forum: Upgrading/Downgrading
Topic: Is Bootloader working OK for people who are running Windows 11?
Replies: 23
Views: 5524

Re: Is Bootloader working OK for people who are running Windows 11?

Found the problem. The switch isn't working. Going to replace the switch.
bootloader working.png
bootloader working.png (41.08 KiB) Viewed 2532 times
by n2gq
Sun Feb 04, 2024 11:24 pm
Forum: Upgrading/Downgrading
Topic: Is Bootloader working OK for people who are running Windows 11?
Replies: 23
Views: 5524

Re: Is Bootloader working OK for people who are running Windows 11?

Not sure if you tried this yet but re-name the .rbf file to Metis.rbf. If you have done this already, I apologize for repeating. I had the hang up on the "erasing" step; I kept stopping and starting and finally it went to the next step of "programming", very slow too. It had act...
by n2gq
Sun Feb 04, 2024 3:48 pm
Forum: Upgrading/Downgrading
Topic: Is Bootloader working OK for people who are running Windows 11?
Replies: 23
Views: 5524

Re: Is Bootloader working OK for people who are running Windows 11?

By the way I do use the websdr version which give me easy access to program. And it is fast.
by n2gq
Sun Feb 04, 2024 3:46 pm
Forum: Upgrading/Downgrading
Topic: Is Bootloader working OK for people who are running Windows 11?
Replies: 23
Views: 5524

Re: Is Bootloader working OK for people who are running Windows 11?

Two NICs? Try disabling the NIC you don't need prior to running Bootloader (Settings > Network & Internet > Change adapter options, right click on the adapter in question). You won't break anything by doing this, you can simply enable it again when you are done. Ok I tried disabling the other N...
by n2gq
Sat Feb 03, 2024 9:21 pm
Forum: Upgrading/Downgrading
Topic: Is Bootloader working OK for people who are running Windows 11?
Replies: 23
Views: 5524

Re: Is Bootloader working OK for people who are running Windows 11?

I could not get mine to work. I have been trying all morning to get going and all I get is this error message ["Can't open interface are you running as root"]. I have tried installing in the same directory as the installer. Then I tried the default directory it wants to install. I turned ...
by n2gq
Sat Feb 03, 2024 8:15 pm
Forum: Upgrading/Downgrading
Topic: Is Bootloader working OK for people who are running Windows 11?
Replies: 23
Views: 5524

Re: Is Bootloader working OK for people who are running Windows 11?

I could not get mine to work. I have been trying all morning to get going and all I get is this error message ["Can't open interface are you running as root"]. I have tried installing in the same directory as the installer. Then I tried the default directory it wants to install. I turned o...
by n2gq
Wed Jan 24, 2024 6:25 pm
Forum: Thetis
Topic: Thetis and Norton security
Replies: 9
Views: 1778

Re: Thetis and Norton security

Had to remove exclusion and then add exclusion again seemed stuck. Figured that one out because I could not install meters and skins. Gave me a data protection warning again. After adding exclusion I was able to install meters and skins.
by n2gq
Tue Jan 16, 2024 9:53 pm
Forum: Thetis
Topic: Thetis and Norton security
Replies: 9
Views: 1778

Re: Thetis has crashed

Please edit your title. Thetis has not crashed, it has been blocked by your Norton anti-virus software. Perhaps your virus definitions updated in a way that now has Norton flagging Thetis as a problem. You may need to tell Norton to generate an exclusion for Thetis. Do you run Thetis as administrat...
by n2gq
Mon Jan 15, 2024 8:53 pm
Forum: Thetis
Topic: Thetis and Norton security
Replies: 9
Views: 1778

Re: Thetis and Norton security

I'm not familiar with Norton, but it would seem it is not fully excluded from all checks. Achieving that level of exclusion would be a goal. You could also test by disabling Norton temporarily. Hi Scott, It does not occur all the time. It does occur on demand when I reduce the waterfall window in 4...
by n2gq
Sat Jan 13, 2024 7:04 pm
Forum: Thetis
Topic: Thetis and Norton security
Replies: 9
Views: 1778

Re: Thetis has crashed

Please edit your title. Thetis has not crashed, it has been blocked by your Norton anti-virus software. Perhaps your virus definitions updated in a way that now has Norton flagging Thetis as a problem. You may need to tell Norton to generate an exclusion for Thetis. Do you run Thetis as administrat...
by n2gq
Sat Jan 13, 2024 6:31 pm
Forum: Thetis
Topic: Thetis and Norton security
Replies: 9
Views: 1778

Thetis and Norton security

I keep getting this message and Thetis crashes. It was idling when this happened.
Ver 2.10.3.5 protocol 2
Win 11
Anan 7000dle mkIII

Thetis security crash.png
Thetis security crash.png (62.2 KiB) Viewed 1778 times

Go to advanced search