upgraded from verizon router to the amazon eero 6+ mesh system. wifi part works great around the house like I wanted but will not let me connect to the 7000DLE MK2 with P2 and Thetis 2.10 never a problem but now. Will play fine cabled to the PC but not through the eero router.
Thanks

That Flex cable is most likely the problem. You can prove that by removing the cable from the front panel mic connector and using your hand PTT switch to demonstrate instant PTT. You don't need the W2IHY box since there is a better EQ, compressor and expander built into Thetis. You can build or buy...

What happens if you use the MOX button to key the radio? When I use the mox it works like it should. No delay. If that works then the problem is most likely in your PTT wiring to the ANAN. This is very similar to this topic: https://community.apache-labs.com/viewtopic.php?f=12&t=4290&p=2151...

w-u-2-o wrote:What happens if you use the MOX button to key the radio?

When I use the mox it works like it should. No delay.

Delay between the ptt and the power out in ssb. Watching the thetis forward power and the external power meter there is a delay, about 2 seconds. I key the radio with the rca in the rear of the radio and the radio is hooked to the 1G fios, not to the pc. Tried to adjust the rf delay and also with an...

Annan 7000DLE MK2... Black. pre AKA MK3. OrionMK2. Protocol 2. (v.3.9). firmware 2.1.18. Thetis v2.9.0.6x64 Where does the signal from the sampler go back into the radio ? There is also talk about activation of the automatic att. function for pure signal but I can't find it in the s Thetis version. ...