I have a year-old G-2 with a plain front. From day one I have used a dedicated Mini GeekOM computer. Over recent weeks, the miniPC has shut down unexpectedly with a black screen. A re-boot has sometimes restored the miniPC and with-it Thetis & the G-2 performed OK. This problem has persisted and is ...

Remind me. Was the G2 designed so that the fan continues to run after the G2 is turned off? Currently the external power supply must be turned off. Why?
Is there a simple explanation?

Thanks,
73 Torrey N9PY

Scott,

Many of us have a pretty good idea how your Anan station is set up.
It would help me if you would post a simple screen grab of your Voicemeeter Banana demonstrating how you use it.

Tnx and 73 Torrey N9PY

somehow the primary image has been corrupted.

What FPGA image filename did you try to program using flashwriter? it looks like it was saturnprimary.bin which I think won't work. Try saturnprimary2023V11.bin unless you are using the newest Thetis dev release in which case use V12.

for a while now ...

somehow the primary image has been corrupted.

What FPGA image filename did you try to program using flashwriter? it looks like it was saturnprimary.bin which I think won't work. Try saturnprimary2023V11.bin unless you are using the newest Thetis dev release in which case use V12.

for a while now ...

Laurence,

I have done the previous firmware and pihpsdr updates on my G-2 with success. This was by using the commands you specified in your August 27, 2023 post. I have been unsuccessful this time corresponding to the current Thetis version 2.10.3.6 -dev2.
I get stalled by this error in the first ...

Do you recall the details of changing the Pi startup setting?

73 Torrey N9PY

Most awesome! Running the 2.10.3.6 "dev" version just posted by Richie.

No change selecting either recording to MIC Audio or to Transmitter Output IQ.
Press MOX (or VOX) and then press REC button.
Playback by pressing MOX and Play buttons. Perfect monitor playback using studio monitor speakers ...

I have had my G-2 plain panel for a few months now. Thetis and firmware updates have each gone smoothly.
Previously, using my 7000DLE Mark III, I was accustomed to using the REC & PLAY button to sample my signal and play back received signals.
After the G-2 arrived and the Balanced mic input was ...

I have had my G-2 plain panel for a few months now. Thetis and firmware updates have each gone smoothly.
Previously, using my 7000DLE Mark III, I was accustomed to using the REC & PLAY button to sample my signal and play back received signals.
After the G-2 arrived and the Balanced mic input was ...

Torrey--please clarify your situation. Are you saying there is still echo? Or are you saying that there is no transmit audio at all?

First off, change your driver back to ASIO in VAC setup.

If the problem is no transmit audio at all, check that none of the VAC "override" options are enabled.

If ...

I tried to set up VAC audio today; after being unsuccessful getting rid of the ECHO on my SSB transmit signal using the TRS balanced input on the G2 with plain front.

I set up an M-Audio Air 192/6 sound interface. Microphone is a Neumann KMS -105 with the phantom power on.
Using Voicemeeter Banana ...

Mine has a balanced TRS jack. After the FPGA firmware update it works. The mic input preamp has very high gain. Requires turning ur mic setting WAY DOWN.
My RE-320 dynamic has +20 dB turned off and use a mic setting of (-)5 dB compared to (+) 21 compared to the 7000DLE Mark 3.

My G2 is fully ...

I suspect you have done a git pull, built the code (creating a new p2app executable) then done a git pull again.

delete p2app executable and re-do git pull


Thanks from me Laurence, realized I had same error as Volker, I just renamed it and everything fell into place.
Thanks again for you help ...

I'm glad it's working but I wish you had done the PTT settings test before fixing the cable because the theory I proposed is the only explanation for why the original cable worked on the 7000 and didn't work on the G2. Regardless, it should work on both now.

Clearly there is no evidence that mic ...

XLR.jpeg Scott,

I pondered your response, and decided I needed to open up these connectors to see "what goes".
Attached are photos of both the XLR connector and the TRS plug on the patch cable.
It all made sense once I did that. At the XLR end, both the mic audio output and the audio return wires ...

Torrey--please tell us exactly how the RE27 and adapter are wired, and please show us a screen shot of Thetis > Setup > General > H/W Select.

The XLR-3 output from the mic is standard. XLR 2 = "hot" (positive) mic output, XLR 1 = shield/ground, XLR 3 = (negative) mic return

By resistance ...

My G-2, 100w, blank front panel arrived just 3 days ago. I pulled my 7000DLE Mark lll off the shelf, putting the new G-2 in its place.
I moved the attached cables...grounding strap, CAT6E cable coming direct from the PC, headphone/speaker plug , microphone plug, and the power supply. Thetis 2.10.0 ...

my G2 without front arrived today 8/23…4 months since ordering. Arrived just 48 hours after shipping to Iowa.
73 Torrey N9PY

Hi Torrey,

Sorry to hear your having such trouble getting P2 to work with your MkIII.

You definitely have a EP4CE115F29C8N Cyclone IV series FPGA since the
"26c" version sort of works and Metis_Orion_MkIII_P2_CV_21.7 does not work.

The 26c is for the EP4CE115F29C8N Cyclone IV and would not work ...

I own an ANAN-7000DLE Marklll received mid-February 2023. Everything is working well using Protocol 1. I would really like to use Protocol 2. I have tried well over a hundred times to install Protocol 2 using the bootloader app. None of the P2 firmware versions I have tried work with my Marklll ...

I have been running my new ANAN-7000DLE MKlll for 6 months. I have used the Thesis Spots functions from time to time with no problem. This week, it does not work. I always get this dialog:
Clicked to Open Dx Spider
Attempting to open Dx Location list
Attempt Opening socket
Socket Forced closed

I ...

Scott, I did as you suggested...swapping out the Thetis and Thetis64 folders with backups after running the v2.10.0 installer That's backwards. Quoting from the other topic:
"If you are in a situation where you are trying to upgrade and you can't get the new version to run, or something is just ...

Torrey--see this topic: https://community.apache-labs.com/viewtopic.php?f=9&t=4707

Scott, I did as you suggested...swapping out the Thetis and Thetis64 folders with backups after running the v2.10.0 installer.
The FATAL ERROR message did not appear. However, the Thesis opens with the Richie's ...

Re: ANAN-G2 Shipping Update
Unread postby rogtrucker » Mon Jul 10, 2023 5:05 pm

per Tony, July 10, 2023, the radios are in production but they are waiting on a piece that goes on the pallet sub-assembly that is backordered. they are working with the supplier to get this item as soon as possible ...

Fatal Error Trying to Run v2.9.0.10.0 Thetis.jpg I have tried unsuccessfully to install a working Thetis version 2.10.0 many times. After installation and clicking on the icon, I immediately get an error message (jpg file attached). I get the same error message on both my shack PC and a laptop.

On ...

No invoice received yet.
For reference, my invoice is #4063 submitted April 26.

73 Torrey N9PY

Scott,

I spent the afternoon working my way through setting up VAC audio through the PC using Voicemeeter/Banana.
'Love the quality of the sound through my high-end studio monitors.
Now, I am ready to set up microphone transmit using VAC. I have read your summaries and and those of W1AEX.
My goal ...

I use VOX and DEXP.
If I also enable "Anti-VOX", VOX ceases to work unless "Use VAC Audio" is also checked.

Why is that?

73 Torrey N9PY

Looks like the new G2 may start shipping as early as next month. The latest communication suggests manufacturing will begin once the new G2 cabinets arrive. There will be lots to learn for all of us. I assume/hope that some group is preparing an updated version of the Thetis manual; plus one for the ...