After using my 10 Mhz Reference Oscillator as the time reference for over an hour, I have come to the conclusion that I cannot reliably make this 2019 iMac Core i7 running Win10 Pro work stably at all with Thetis in BootCamp. It seems all over the place. The reference oscillator is up and down and n...

Correction. It is staying stable just receiving. VAC over and under are minimal (I think at 40 and 52.). Am I wrong there? It has been receiving now for 30 mins undisturbed. I transmitted. And once again, the waterfall has shifted. I went back to WWV and sure enough under calibration it changed the ...

I was looking for a Thread like this because I have been puzzled for a bit now. My new Anan 7000 DLE is also doing the same. I received mine in late April 2023. I have not checked to see what FPGA is in it. After calibrating to 10.0Mhz WWV. And watching the waterfall in WSJTX on 6M for about 15 mins...

I agree with that Scott.

And have directed him this way. We will check the obvious.

Thanks,
Ronnie.

I will add this fellow is no stranger to ANAN SDR. He has an ANAN 10. And he knows how to use it. Has had it for years. Also he understands computers and networking.

The 7000 Radio simply refuses to do anything on the network.

Thanks,

Ronnie

Hi all. Posting this for a friend who just purchased a USED Anan7000 DLE MKII. He has tried to connect on his LAN. And has tried directly to connect to the radio. It refuses either way. it will not show up. I have looked through the sticky seeing nothing on a master reset. Is there a factory reset f...

Alrighty then. Apparently V4 full is installed by default in a Win 10 64 clean install as I found out. That settles it. Installed 3.2.6.22 on my Acer core i5. Made a comm pair. Started DDutil Selected the settings. Closed DDutuil Started again, and worked first time. I guess it has a problem with MA...

Ok interesting... <net Framework 4.0.30319.... By any chance did you do an upgrade path to Windows 10 from...say windows 7/8 or something along the way? Can you clarify that please. A clean install of 10-64 only installs that particular .NET Framework package. To my knowledge. I am going to take out...

Good morning Scott. Some new clues this morning. I removed DDutil, and downloaded the V3.2.7.02 you had. Installed again. Setup again. No connection to Thetis. This is really simple as you have shown, and I know that. But it will not talk. All my setting replicate yours. This time, I used another di...

My apologies Scott. Frustration did get the better of me. Sorry about that. I have been supporting Windows as a Tech for 25+ years and am getting a bit too cozy with Mac OS. Your JPG was pretty small. I did miss some of the checkmarks and I will have another look. But you are probably right about th...

OK Scott. That again was a NO-GO. I tried everything. One final question. Are you running in 32 Bit Mode Windows 10 Pro or 64 Bit Mode? With Thetis in 64 Bit Mode? Because, from what I can see, this seems to my problem. DDutil cannot stand being launched in a 64 bit platform in legacy. And come to t...

Thanks Scott. And BTW, I did have a Windows 10 Box. A REAL i5. With 10 Pro-64 on it and it did the exact same things.... So, I am going to trash Steve's VSP. And uninstall it. And I will try with what you are running. The Bootcamp works perfectly with everything else. It will talk to everything. Inc...

Scott, I forgot.

Yes, I have tried in LEGACY mode. Exact same results every time.... Grrrrrrrrr......

Ronnie
VE3NLS

Scott and Bill. First off, Scott, I do have lots of experience with DDutil. The problem I am having is that SmartSDR is supported BUT PowerSDR of any kind is not by Steve. He even told me so. So Thetis is also not supported. Well, at least to my knowledge. So, I tried one last time with 3.2.6.22. An...

Hi Scott. That link to the Yahoo Groups message seems to be dead. Or maybe I am just not a member. Or I don't know? I am not a Yahoo guy at all. Do you have or can you provide a text version of the message. I would like to read what the author had to say. It could help me get the PW1 and DDutil and ...

Yes. I certainly will Bill. I will give this a try in a couple days.

Thanks to everyone for their help.

And I will definitely post my results if I can make this work again. It is fickle. But it did work just fine with the Flex-3000 and K9NES's Software.

Best.
Ronnie
VE3NLS

OK. I will read that and see if I can still make it all work.

Thanks so much for your post.

I know this did work with a basic IC2 interface to the CIV from a COMM port.

Ronnie
VE3NLS

Thanks everyone for the replies. An additional hardware solution is not what I am looking for. I will just ditch this amp and get something that is newer. Doesn't anyone out there have a software solution to this issue. Something like DDutil ?? It worked so well with The FLEX-3000 and the PW-1. All ...

OK thanks Bill. I looked you up on QRZ. I hope that is the correct handle. I will look into this more. But I think it is probably time to part with this old PW-1. It is difficult to interface it to anything really besides the requisite ICOM style Radio with the cables. Which does work just perfect. ...

Thanks for the reply. Interesting. Are there any schematics out there for this? Is any of it OpenSource? Can I construct my own? Or is this the only way to get the CIV communication to the PW1 from the ANAN? I have owned other amps, but I sold them in the down cycles. I got this PW-1 in and repaired...

Hello to all. I see very little about this topic. It would be nice to have the CIV work with the CAT control from Thetis for the 7000. Band change is really the only missing component. I have PTT and ALC worked out. Everything I have tried doesn't work. I used to use DDutil V3.6 with my Flex3000 and...