Great job, Stephen!
It would be great to find another Expert to expand these instructions to include the G2 with Display and the G2 Ultra.

As far as I know, all G2s have an FPGA XC7A200T. (Correct me if I'm wrong).
There is also only one firmware which is available from G8NJJ Laurence Barker (FPGA) and DL1YCF Christoph van Wüllen (piHPSDR).
In piHPSDR, you can choose between a display of 7", 8" or no display.

New measurements without ...

Hi experts,
I also carried out the test with the spurs.
My TRX is an ANAN G2 with a 7" display and the latest
Firmware (FPGA and piHPSDR). I can see the spurs
at 15 kHz intervals above and below. Everything is OK with the TRX without the power amplifier (PA), but with the PA, the spurs are clearly ...

You can also use the Taskmanager p2app end Task.

Well done, Larence.
Everything is fine with me. Thetis and piHPSDR work.
I have an ANAN G2 from 2023 with a 7" screen.
Vy 73, Roger DL2YDP

And what is the simple solution to the problem?

Norbert, at DL1YCF on the Github site. Look in the 'scr' folder where it says > Removed some un-unsed functions from SATURN code<.
I loaded the firmware and then continued... as usual with 'make clean' and 'make'.

I have flashed the latest firmware (2023.11.23) from Christoph (DL1YCF)
and now the saturnprimary2024V18 works without me changing anything.

V18 incompatible?

After updating pihpsdr and Saturn (rrename V18 BIT file) and (updated p2app version number) I can no longer start pihpsdr.
With V17 pihpsdr runs, what should I do?

https://img.kleinanzeigen.de/api/v1/prod-ads/images/83/8313432b-8d66-426d-b128-f331b4e4c977?rule=$_57.AUTO
https ...

Check that your directory structure is correct. It is also possible that the piHPSDR directory is in the github directory -->

home/pi/github/pihpsdr.desktop

My G2 is now up to date thanks to the kind support of Norbert DL8LAQ. Thanks also to Larence.

Best regards

Roger

https://img.kleinanzeigen.de/api/v1/prod-ads/images/75/757bbd2e-e854-4730-9da4-e590eca92b3b?rule=$_57.AUTO
https://img.kleinanzeigen.de/api/v1/prod-ads/images/df/df601e2a-03e4-42e8 ...

Hello John,
I have flashed all versions from V12 to V17 but without success.

Hi Norbert.
That sounds good and I thank you for your offer, which I gladly accept.
What time is convenient for you?

Laurence, that sounds good.
Unfortunately, I'm not a computer expert and LINUX is new to me.
Are there any instructions on how to do this?
I don't want to do anything wrong!

Laurence, I've downloaded and tried again, but unfortunately it hasn't worked.

The G2 was switched off overnight without all cables and wires. But it still remains at V11! ! !

I will remove all cables and wires overnight and report what happened.

Yes, the G2 was switched off overnight. PS off!

Hi Laurence.

Here are the screenshots of the Flashwriter and P2app in the LX terminal after programming.
https://img.kleinanzeigen.de/api/v1/prod-ads/images/e7/e78bf76f-f84d-4b12-8f4e-dc1fb72b587f?rule=$_59.JPG
https://img.kleinanzeigen.de/api/v1/prod-ads/images/79/796e2d38-6fd7-41c3-bf04 ...

Hi guys.

My FPGA is version 11, so I downloaded version 17 from github. I started the flashwriter, loaded the V17 file and programmed the FPGA with V17. I shut down the G2 and turned off the PS. Restarted the G2 and started the p2app in the terminal and the version is still V11. I repeated the ...

What is the exact type designation of the Noctua fan?

Ron,
you need to update piHPSDR first and then Saturn.

NO !
The Fan in the top cover of the G2 is 120x120mm by 25mm.

Re: RX2 & numb ADC1

Is the behaviour the same with piHPSDR?

The image works. I have successfully flashed it onto a µSD card. The G2 is working and I just need to do the updates.

K5WC wrote: Thanks Tony for the link, did it get you back up and going?
73 John

Thanks for the link Toni. I will test the image immediately. Stay tuned.

4. Download a drive image from Apache Labs:
a. With display:
https://storage.googleapis.com/anan_g2/G2_Display_production_image.img
b. Without display:
https://storage.googleapis.com/anan_g2/G2_No_Display_production_image_27082

Both links do not work!

This XML file does not appear to have ...

Where can I download the SD card image for the Anan G2 LCD?
I would also like to know this. The link in the manual does not work!

Hi Tem,
The latest update from Christoph is from yesterday ...
src increase protocol-2 "tx iq prefill"
and the current version of wdsp is 1.24

I downloaded the saturnprimary2023V12.bin again from github and reinstalled it. Then I checked the P2app and piHPSDR for newer files. They are both up to date. My G2 with display and piHPSDR still does not transmit with V12. So I went back to V11. Now it transmits again. It is still noticeable that ...