Interesting , thanks for posting

Perhaps try a lower value to see if it has any affect.

What NB Threshold value are you using ?


attachment=0]Untitled.jpg[/attachment]

ah excellent info, thanks Scott.

Thanks for the excellent explanation Scott. I've had the internal LNA off for some time as an experiment , doing some not so scientific tests with my local beacon. I really bought the unit as a band pass filter to see if I could negate some of the local noise sources. It has been of some benefit but ...

Hi Scott, afraid I do not have a noise figure for the LNA , the spec just says "low noise" . The feedline loss is 0.5 db . I can see this behaviour whether the masthead LNA is switched on or off . To give an example the noise floor is currently showing S2 -114 dbm and iif i select S-ATT 30 the s ...

Hi Guys , just installed an 18db masthead pre amp/band pass filter for my 6 meter set up. I notice when I select an attenuator level that the S meter reading actually goes up and not down as I expected. Is this normal behaviour or am I missing something ? Thanks in advance

I found the off cut of a plastic cable tie in my 7000

Hi Charlie, Scott did a nice tutorial which I used http://wu2o.dyndns.org/wu2o_vac_tutorial_2.html I could maybe do a teamviewer session with you sometime if you get stuck ?

Hi Charlie, try unchecking the mic over riding vac on PTT checkbox

Thanks Ernst, I must have screwed up by putting ele in at some point. Working now Vielen dank

If I move the rotator needle in Thetis then PST just goes to zero . Is my Thetis AZ and STOP text correct ?

AZ: <PST><AZIMUTH>%ELE%</AZIMUTH></PST>

STOP: <PST><STOP>1</STOP></PST> to <PST><STOP>1</STOP></PST><PST><TRACK>1</TRACK></PST>

Thanks for the screenshots Ernst, a picture is worth a thousand words

Hi John , I did notice some improvements in performance when I upgraded to Win 10 from 7 some years back.

Installed earlier with no problem

good stuff Richie, look forward to that.

Would be nice but I think Warren previously mentioned it would take quite a bit of work.

Aivars wrote:Hello! What about TCI Audio in Thetis? Any plans to ad it?

Thanks Gary, yeah I found that out the hard way that it would not start. Luckily I had a back up database so just started over with a new database and re imported.
The " " were the offending characters as you rightly pointed out so working great now.

Gary I wonder if you have tried JTalert by any chance. I managed to wreck the first dev 5 by trying to be too clever and pasting in

"C:\Program Files (x86)\HamApps\JTAlert\JTAlertV2.exe" /jtdx

which I got from the JTalert shortcut properties dialogue

Thanks Richie. Edit: Just tested the start up feature and Thetis fires up JTDX no problem at all . Very useful feature

Thanks for the info Paul .

Thanks Scott, think I'll get one of those VK samplers

Sorry if this is a dumb question , is there any benefit to using a sampler/pure signal on digital modes like Ft8 ?

Hi Scott, I was quite willing to try it and did not really see it as a risk as long as there is a backup (I always try out the new stuff) It worked really well for few weeks until for some reason (which may or may not be be related to cm asio) audio issues arose. Maybe the fixed low buffer size ...

In my case I tried Cmasio for a few weeks and it was fine until I developed some audio issues. I could not identify the problem so the easiest way out was to revert back to ASIO VAC and voicemeeter potato.

Thanks Scott

Try region 1 instead of Denmark perhaps ?

Just came across N2MDX skins on server. Some really cool skins worth checking out if like me you are into "eye candy" on the Thetis user interface.

Same here Mark, listing says 7 comments but not showing here even after i "liked" their page. Must be some weird facebook thing

Edit: The one comment I saw yesterday is now not appearing, maybe Oliter are hiding/deleting them ?