HPSDRBootloader (version 2.0.4.4) 2015-1-29 worked with my relatively fresh computer build here with Windows 11 22H2 (10/19/23) build 22621.3007.
Installed npcap-1.79.exe then did a reboot before running HPSDRBootloader.
Installed firmware Metis_Orion_MkII_Protocol_2_v2.2.2.rbf
GL
John
Search found 16 matches
- Mon Jan 29, 2024 7:24 pm
- Forum: Upgrading/Downgrading
- Topic: Is Bootloader working OK for people who are running Windows 11?
- Replies: 23
- Views: 9591
- Mon Oct 09, 2023 5:34 pm
- Forum: Thetis
- Topic: Mode Switching Issue..?
- Replies: 4
- Views: 1028
Mode Switching Issue..?
The problem I am experiencing has been around for a while - normally not a big deal, until I start chasing a lot of DX requiring frequent mode switching. If I am running CW and then switch to FT8(DIGU) the 7000 will key but no RF. Shutdown/restart of Thetis allows FT8(DIGU) to function again. If in ...
- Tue Mar 15, 2022 6:14 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 984217
Re: Thetis v2.8.11 - UPDATES and current issues
Hel Richie,
Yes your are correct. I was using Ham Radio Deluxe as a layer between WSJT-X and Thetis. I did this because I use multiple rig types, simplifies switching rigs. Something in HRD is causing the issue. Thanks and sorry for the waste of your time!
John
Yes your are correct. I was using Ham Radio Deluxe as a layer between WSJT-X and Thetis. I did this because I use multiple rig types, simplifies switching rigs. Something in HRD is causing the issue. Thanks and sorry for the waste of your time!
John
- Tue Mar 15, 2022 5:06 pm
- Forum: Thetis
- Topic: Thetis v2.8.11 - UPDATES and current issues
- Replies: 1752
- Views: 984217
Re: Thetis v2.8.11 - UPDATES and current issues
In current Thetis RC version 21k9rc5b programs like WSJT-X that send CAT commands to VFO B for frequency shift on/during transmit - Thetis assigns VFO B freq also to VFO A. Reverting back to an older version like 21k7 the "issue" is not exhibited. VFO Sync is not enabled. VFO A lock does k...
- Fri Dec 14, 2018 7:25 pm
- Forum: Thetis
- Topic: Quirks with Thetis
- Replies: 25
- Views: 17047
Re: Quirks with Thetis
Sorry Scott thats not a fix here. Buffers continue to count "TO" underflows and "FROM" overflows. Both set to 1.000. Buffer set to 2048 and all manual boxes unchecked.
- Fri Dec 14, 2018 6:50 pm
- Forum: Thetis
- Topic: Quirks with Thetis
- Replies: 25
- Views: 17047
Re: Quirks with Thetis
Thetis V2.6.0 Firmware 1.3 on 7000DLE Voicemeeter Banana 2.0.4.4 Sample rate 192000 Database - reset Thetis crashes when VAC enabled. If Thetis is started with VAC enabled Thetis can crash within a few seconds. No amount of manipulation of values in VAC Monitor will allow VAC to "sync up(?)&quo...
- Fri Jul 20, 2018 5:32 pm
- Forum: Amplifiers & Tuners
- Topic: 7000DLE and Linear Amplifier interfacing
- Replies: 2
- Views: 5996
Re: 7000DLE and Linear Amplifier interfacing
Thanks Volker I read the manual several times and missed it each time. Was looking at the pure signal portion of the manual in more detail but never found it there...
John
John
- Fri Jul 20, 2018 1:21 pm
- Forum: Amplifiers & Tuners
- Topic: 7000DLE and Linear Amplifier interfacing
- Replies: 2
- Views: 5996
7000DLE and Linear Amplifier interfacing
What is the correct"port" to inject the sampled signal from the linear amplifier for pure signal correction in the 7000DLE?
- Thu Jul 05, 2018 1:14 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: WSJT-X FT8 - OpenHPSDR 3.4.9 - 60M
- Replies: 8
- Views: 8127
Re: WSJT-X FT8 - OpenHPSDR 3.4.9 - 60M
Thanks Scott. I think your method will work the best. Given the opportunity to work FT8 in DXpedition mode again on 60M, I will just change that setting before I operate and change it back after the Q. Wish I would have thought of that while KH1/KH7Z was in operation on 60M. Anyone want to try a tes...
- Wed Jul 04, 2018 6:48 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: WSJT-X FT8 - OpenHPSDR 3.4.9 - 60M
- Replies: 8
- Views: 8127
Re: WSJT-X FT8 - OpenHPSDR 3.4.9 - 60M
Perhaps I need to be more specific. I have no problem transmitting on the 60M band. That is not the issue. The issue is with the specifics of how the WSJT-X software works in the FT8 DXpedtion mode. Hence the query to someone that actually has used WSJT-X in the FT8 mode successfully. In DXpedition ...
- Wed Jul 04, 2018 1:35 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: WSJT-X FT8 - OpenHPSDR 3.4.9 - 60M
- Replies: 8
- Views: 8127
Re: WSJT-X FT8 - OpenHPSDR 3.4.9 - 60M
Thanks for the reply Mike, have you got your setup working for WSJT-X DXpedition mode on 60M?
- Wed Jul 04, 2018 10:42 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: WSJT-X FT8 - OpenHPSDR 3.4.9 - 60M
- Replies: 8
- Views: 8127
WSJT-X FT8 - OpenHPSDR 3.4.9 - 60M
For those that have this working on transmit, what setup are you using on WSJT-X for rig control and what settings on OpenHPSDR are you using that allows the OpenHPSDR to function without transmit errors (outside of channel etc)
- Wed Apr 19, 2017 12:52 pm
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: ANAN-8000DLE SWR Protection
- Replies: 18
- Views: 32240
Re: ANAN-8000DLE SWR Protection
So, looking at the arduino 1.6b code there is no hysteresis in measurements of SWR. I added 250 msec delay before fault trigger and that cured the random SWR mismatch errors. Code will fault if SWR is greater than 3.5 and power is greater than 50W, seems generous enough. Noticed on the front panel d...
- Tue Apr 18, 2017 2:28 am
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: ANAN-8000DLE SWR Protection
- Replies: 18
- Views: 32240
Re: ANAN-8000DLE SWR Protection
Scott I may have to revert.
Looking at the arduino code at the moment. The version number in the code is still 1.06. In other words the filename/sketch name is 1.06b but the code was not changed to reflect the version change.
Now will look at the SWR routine.
Thanks
John
Looking at the arduino code at the moment. The version number in the code is still 1.06. In other words the filename/sketch name is 1.06b but the code was not changed to reflect the version change.
Now will look at the SWR routine.
Thanks
John
- Tue Apr 18, 2017 1:06 am
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: ANAN-8000DLE SWR Protection
- Replies: 18
- Views: 32240
Re: ANAN-8000DLE SWR Protection
Tom I am running protcol 2 and Thetis. The sketch upload seemed to complete with no errors. Does your 8000DLE show version 1.06 on the display or 1.06B after the firmware upload? If yours shows 1.06B then my upload was not successful (Although the SSB SWR error issue was addressed after the firmware...
- Mon Apr 17, 2017 11:01 pm
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: ANAN-8000DLE SWR Protection
- Replies: 18
- Views: 32240
Re: ANAN-8000DLE SWR Protection
Upon receiving the 8000DLE and getting it operational I noticed the rig had high sensitivity to SWR on SSB. Downloaded the SWR sensitivity "fix". Seems that the issue is corrected for SSB. However just tried a long run (many contacts) on CW and found the SWR sensitivity issue still very mu...