Hi Rick,

thank you!

Hi all,

I still like to have an original image. No answer from A-L yet! Is there anybody out there with a working link?

Problem solved!

*deleted*

Hi all,

I need an image for the G2 with 7" dislay. My old image G2_Display_2308.zip does not unzip.
All the links I found here do not work. F.... sh...!

Hi Jim,

my bad, yes, it's no Thetis problem. Thetis is a frech install with a clean database. Some questions to ask tomorrow. I was a bit tired after a 2 hours remote session with this guy

Hi guys,

I need an advise how to fix this problem for a remote OM in Austria. I used Anydesk to update his ANAN. He was still running PowerSDR and protocol 1.

The problem is that the ANAN goes into transmitt even without a microphone. I switched PTT off and enabled spacebar PTT so that the very OM ...

w-u-2-o wrote: Sun Oct 19, 2025 1:36 pm Is it the round, silver switch, or the red, square switch?

It's the round one on the old housings (100D, 200D, 7000DLE).

Hi,

I need the p/n of the power switch at front panel of an ANAN-7000DLE MK2, should be the same as in -100D, -200D and 7000.
The old man (80+) is 1000 km away and I try to help him at less cost as possible.

73, Norbert

Roger GT wrote:I have flashed the latest firmware (2023.11.23) from Christoph (DL1YCF)
and now the saturnprimary2024V18 works without me changing anything.

Where can we find the special firmware? What is the difference to the V18 I got with todays Saturn update?

laurencebarker wrote:piHPSDR will need to be recompiled for the new version. For a while that has had to happen for each change to the firmware, but we now have a way that this won't have to happen so often.

Pulled the latest version of pihpsdr, but still no fun

Check that your directory structure is correct. It is also possible that the piHPSDR directory is in the github directory -->

home/pi/github/pihpsdr.desktop
Please, please, please, don't blame the directory structure for any problems! piHPSDR is working perfectly on my Saturn within /github ...

Interestingly I've just been exchanging messages with Rick (one of the developers) on a different topic and he has had the same experience. The cause was, he had a primary image installed at the fallback location; and the fix was to re-install the fallback image at the fallback location, then flash ...

Laurence, that sounds good.
Unfortunately, I'm not a computer expert and LINUX is new to me.
Are there any instructions on how to do this?
I don't want to do anything wrong!
Hi Roger,

we can make a phone / Anydesk (portable) meeting. I will never use Teamviewer again!
I am not at home today ...

https://www.youtube.com/watch?v=naFHlwT_V24&ab_channel=DarrenN4VFR

And file attached

I watched the video. But why is he downloading the FPGA bin-file from github? That's nonsense, because the new bin-file is already there after make. that is also clearly seen in the video :-)

Checkout ...

You can use "git log" to see the version history.

Thks found it and downloaded V17. Also downloaded instructions from N4VFR.

Question: do I need to update Rasp OS (Buster 10) to install all (security) updates with sudo apt update / sudo apt full-upgrade?

Don't do an update of RaspberryPi OS ...

Received my Anan G2 yesterday with the following:
Raspi OS Buster 10 is installed (Raspi model 4). FPGA bit file 30092023. Saturn product version 2. FPGA FW 10.

So this means I need to upgrade to FW 17. Task for the weekend to read the manual and how to upgrade to FW 17.
Can I find somewhere ...

Hi,
This may be a daft question, I just got a G2 last week. How do I see the current firmware version I am running?
Is this the correct place? If so mine shows 2.0.0 which seems very different to version 17 mentioned here?
Thanks
Mike
Screenshot 2024-10-30 at 10.13.19.jpg
Hi Mike,

just start the ...

Hi Richie,

that did the trick. As always, many thanks for your work!

Deinstalled release 2.10.3.6 and installed ver. dev_8b from 08/06/24. Same slow gui building.
Seems to be a problem with the windows. But why do I see this also on a brand new HP Workstation? Both computer are equipped with NVIDIA GPUs. NVIDIA driver?

Switching on my machine is immediate -- no delay at all like you see.

What does your CPU usage look like when switching?

Process Explorer:
TX on, Thetis jumps from 11 to 22 % cpu usage and slows dow to 13 %, still transmitting. When switching back to RX cpu usage jumps up to 22 and slows down to ...

Hi all,

am I the only one with a very slow GUI like seen in the video below? Building up the main window right after start takes 10 seconds until all buttons and other gui parts are placed.

https://www.dropbox.com/scl/fi/wmc678swr1sj3o519p97h/Thetis_2024-10-25_17-30-53.mp4?rlkey ...

ramdor wrote:just an update to the release files over on git hub, moving to dev_8b.

W11PRO doesn't like this msi-file with the windows defender update from today morning! Just for info!

Read this: viewtopic.php?f=7&t=4722

Hi Laurence,

all updates performed. I still have to figure out how to use the front buttons with Thetis

Hi Juha,

which radio and firmware?

I have seen this behavior on several 7000 and 8000 radios with f/w earlier than the version with the rf fix.

See here https://community.apache-labs.com/viewtopic.php?f=32&t=4972

Within two weeks I have had 3 radios on the bench, two 7000DLE and one 8000DLE ...

W4WMT wrote: Out of the box, is SSH enabled on the G2's Pi?
Or will I first need to connect a keyboard/monitor/mouse & manually enable SSH, before remoting in to the G2 from my PC?
Thanks!

No and yes!

Diversity was enabled. Why? I never enabled diversity! Problem solved

Hi Norbert,

I am using built 2024-01-26. I can run 2 receivers at 192000 without problems. Second RX is assigned to VFO B. you can change to RX2 (activate) by clicking on the spectrum. The S-meter and headphone audio are always related to the active RX. Split is working as well.


Reboot, pihpsdr ...

Hi Volker,

I just tried using the 2nd rx, but didn't get spectrum, waterfall or audio. All I got are grey and black fields below rx one. Will later try pihpsdr on M1 Mac too.

Running Saturn f/w 13 and pihpsdr build from 2024-04-03.

73, Norbert