This is exactly why I am not pre-ordering a G1. I would rather just safely wait until they are shipping and a few people have them before I order. I know it's going to cost me more but consider it as insurance.

A single ADC so no diversity receive. That is not a problem that can't be solved with small footprint receive antennas. I would love to see an inside the case view. Also if it is just an FPGA and no compute module, what is the EOL of the FPGA?

Would not want to place myself in a situation down the ...

Just saw the listing of a new model called the G1. Looking at it seems to be a single ADC. I thought at first a stripped down version of the G2.

Looking at the back of the radio it doesn't appear to be a stripped down G2. There are no USB or HDMI connectors. There is a bootloader switch on the back ...

Is there an opportunity for a new availability of the Hermes 14 bit card?
73
Gérard

Gérard,

Understand that nobody on the forum works for Apache, so nobody can provide a definitive answer. However, my guess that the answer is "No."

However, there have been rumors of Apache bringing out a new ...

Don't worry they are both back. There is a disclaimer they are not taking orders till FCC ID is granted. It also says that if you now place an order it will be cancelled. That does not mean they are cancelling those that have already pre-ordered.

They updated the specs on the booking page...1500W high power 800W low power (e.g. high duty cycle).

So 1500W SSB/CW and 800W FM/Digital

https://apache-labs.com/al-products/1048/ANAN-G2-1K--1000W-HF--6M-SDR-Transceiver-Booking.html

Seeing as it has Dual ART1k6 LDMOS Devices I think the derating ...

Apache Labs now proudly Headquartered out of California, USA

Local US support & Service! Any Questions please call:

949-591-6895 (Monday-Friday 10AM - 5PM PDT)

Industry leading 2 Years Manufacturer Warranty
Are you working for Apache, Art?

I figured you would know who is involved in the ...

Sounds like the same investors that thought it would be best to seek FCC approval for the G2-1K radio have demanded a U.S. presence. Money has a way of influencing decision making. Let's face it the direction A.L. was headed was not good. I hope this does turn around A.L. Maybe just freeze product ...

Discord is the place to be right now.

https://discord.gg/y3qABbNq

.
.
The software development is more in line with proper development (even if there is a cost for improvements) the current development of Thetis is outdated and patchy at best and does not come close to utilizing the full potential of the Saturn hardware. Too much time spent on "bling" popups and ...

Best thing to do is order a G2 with screen and make your own front panel. Sound like you have a laser capable of cutting so you could design your own to replace factory screen panel. How were you planning on labeling the controls. Etch the material and do color fill?

Two months from last info from Ahbi. :oops:
In a world where communication is more important than substance it is absurd that AL is not informing us about this new product. At least who has already payed a deposit!!


P.S. I transferred to AL $ 1795 on August 18th 2022 and $ 399 for 50 V external ...

The amp is for sale separately -- so that will require FCC validation...not the one in the 1.5K model.

Read this message. It pertains to the G2 radio with amplifier built in.

It was brought to our attention by several key stakeholders that the ANAN-G2 1K5 model could potentially be modified to ...

The problem happened when they realized that the 1K5 could be used as an external amplifier with any other radio.

Typical FCC approval times are usually about 6 months. Can be longer if independent lab testing finds problems.

That's a beautiful connector!

No stop on shell so it pushed out the connector you lose ground. But that was not my problem the shield was disconnected.

Those are very easy to over tighten. There should be a small gap between the barrel and the 90 Degree body. If you over tighten you suck the ...

Latest update.

https://apache-labs.com/al-products/1048/ANAN-G2-1K--1000W-HF--6M-SDR-Transceiver-Booking.html

Best Regards,

Abhi


Notice no CW jack in the back and no jacks on the front! I guess the CW guys got left out unless it is on the new ACC DB connector?

Why the pure signal SMA ...

Yes a downward expander might work but it would have to be external of the radio.
I don't see why that should be the case.
If the threshold were set above the ambient noise in the shack, then the expansion ratio could be set deeply enough to attenuate it below where it would be objectionable.
73 ...

Yes a downward expander might work but it would have to be external of the radio. Since he is using it remotely this does complicate the problem.

He would need the downward expander on the remote end. Simple way without using external gear is to use a "VST HOST" program and find a Free downward ...

KC2QMA wrote:Still waiting on the G2 service info. 1/19/24.....

Try this and see if you get an answer. Saw it posted elsewhere just sharing.
aprakash@apache-labs.com

I would try reducing the Motu gain first. Try being closer to -3 in the whole audio chain rather than 0. Also with the Motu maxed you are overdriving the interface. You didn't mention what microphone you are using.

Should he change his regedit to the M-Track Solo and Duo ASIO not VM?

M Track is the M audio device.

Curious as to what you are using for audio cables and connectors?

Hi Leslie,
I only use my G2 with piHPSDR. I suspect that my G2 has a fundamental problem. How do I explain that I have noise on the S9 even without an antenna. I'm attaching two pictures. Once with and once without an antenna.

https://c.gmx.net/@324904017886970427/IS4eH9OHRfWFj5N2hN5hNg
https ...

I think I'm a bit confused but this is what I think I'm supposed to do to update to 2.10.1 on my G2 100w plain.

Download and install Thetis.2.10.1 to my windows PC.
Download and install new p2app with updated firmware to the built in computer in the G2?
Where do I download the new p2app files from ...

Using Thetis v2.10.0 with a new G-100, I've experience issues while using CW mode. The radio transmits as if Break-In is turned "On" no matter what the setting might be. Even with Break-In turned off, all CW dots and dashes are transmitted. I've also noted when that happens, I get an ADC1 error ...

Why is the TAPR github not setup so issues can be posted? With Ritchie taking a break it would seem like the most likely place for it to get noticed is at the link I posted in the original post.

Looks to also have Ritchie's updates

https://github.com/TAPR/OpenHPSDR-Theti ... ag/v2.10.0

Introduction & Links

Because I was not Johnny-on-the-spot over the weekend, Bill beat me to posting about this new release of Thetis, version 2.10.0. I didn't want to lose the info in the posts below, so Bill has very kindly let me hijack his original post :)

The 2.10.0 installer is available in ...

Selecting balanced XLR input.

Noticed this from another post.

Protocol 2, and with it Thetis or pihpsdr, have no settings to select the XLR balanced microphone input. In time maybe that can be added, but we'd have to check that the changes to the protocol had no effect onto other radios. In the ...