Search found 64 matches
- Tue Feb 20, 2024 7:48 pm
- Forum: Thetis
- Topic: Using MOX vs PTT different transmit eq
- Replies: 10
- Views: 1832
Re: Using MOX vs PTT different transmit eq
That's a beautiful connector! No stop on shell so it pushed out the connector you lose ground. But that was not my problem the shield was disconnected. Those are very easy to over tighten. There should be a small gap between the barrel and the 90 Degree body. If you over tighten you suck the intern...
- Mon Feb 19, 2024 8:35 pm
- Forum: Apache Labs News
- Topic: Shipping Updates
- Replies: 255
- Views: 350787
Re: Shipping Updates
Latest update. https://apache-labs.com/al-products/1048/ANAN-G2-1K--1000W-HF--6M-SDR-Transceiver-Booking.html Best Regards, Abhi Notice no CW jack in the back and no jacks on the front! I guess the CW guys got left out unless it is on the new ACC DB connector? Why the pure signal SMA connector? It ...
- Sun Feb 11, 2024 11:07 pm
- Forum: Thetis
- Topic: Beginning of transmission spike
- Replies: 23
- Views: 2617
Re: Beginning of transmission spike
Yes a downward expander might work but it would have to be external of the radio. I don't see why that should be the case. If the threshold were set above the ambient noise in the shack, then the expansion ratio could be set deeply enough to attenuate it below where it would be objectionable. 73 It...
- Sun Feb 11, 2024 8:31 pm
- Forum: Thetis
- Topic: Beginning of transmission spike
- Replies: 23
- Views: 2617
Re: Beginning of transmission spike
Yes a downward expander might work but it would have to be external of the radio. Since he is using it remotely this does complicate the problem. He would need the downward expander on the remote end. Simple way without using external gear is to use a "VST HOST" program and find a Free dow...
- Fri Jan 19, 2024 4:19 pm
- Forum: Apache-specific Hardware Discussions
- Topic: G2 Service/Schematics info
- Replies: 9
- Views: 2088
Re: G2 Service/Schematics info
KC2QMA wrote:Still waiting on the G2 service info. 1/19/24.....
Try this and see if you get an answer. Saw it posted elsewhere just sharing.
aprakash@apache-labs.com
- Sun Dec 31, 2023 1:11 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: Background noise reports - mic / gain setup?
- Replies: 7
- Views: 2412
Re: Background noise reports - mic / gain setup?
I would try reducing the Motu gain first. Try being closer to -3 in the whole audio chain rather than 0. Also with the Motu maxed you are overdriving the interface. You didn't mention what microphone you are using.
- Tue Dec 19, 2023 12:07 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 101459
Re: cmASIO feature in Thetis 2.10.3.5 pre 3
Should he change his regedit to the M-Track Solo and Duo ASIO not VM?
M Track is the M audio device.
M Track is the M audio device.
- Sun Nov 05, 2023 9:53 pm
- Forum: G2 Operating System & Applications
- Topic: Mic input issues on G2 with display panel
- Replies: 20
- Views: 9345
Re: Mic input issues on G2 with display panel
Curious as to what you are using for audio cables and connectors?
- Tue Oct 31, 2023 8:56 pm
- Forum: G2 Operating System & Applications
- Topic: New G2 with display and problems
- Replies: 33
- Views: 32537
Re: New G2 with display and problems
Hi Leslie, I only use my G2 with piHPSDR. I suspect that my G2 has a fundamental problem. How do I explain that I have noise on the S9 even without an antenna. I'm attaching two pictures. Once with and once without an antenna. https://c.gmx.net/@324904017886970427/IS4eH9OHRfWFj5N2hN5hNg https://c.g...
- Sun Aug 27, 2023 7:58 pm
- Forum: Thetis
- Topic: Thetis 2.10.3.5 Final Now Available
- Replies: 64
- Views: 72087
Re: Thetis 2.10.1 Released
I think I'm a bit confused but this is what I think I'm supposed to do to update to 2.10.1 on my G2 100w plain. Download and install Thetis.2.10.1 to my windows PC. Download and install new p2app with updated firmware to the built in computer in the G2? Where do I download the new p2app files from?...
- Mon Jul 31, 2023 4:57 pm
- Forum: Thetis
- Topic: Thetis 2.10.0 Released (G2 users take note!)
- Replies: 48
- Views: 11017
Re: Thetis 2.10.0 Released (G2 users take note!)
Using Thetis v2.10.0 with a new G-100, I've experience issues while using CW mode. The radio transmits as if Break-In is turned "On" no matter what the setting might be. Even with Break-In turned off, all CW dots and dashes are transmitted. I've also noted when that happens, I get an ADC1...
- Thu Jul 27, 2023 5:08 pm
- Forum: Thetis
- Topic: Thetis 2.10.0 Released (G2 users take note!)
- Replies: 48
- Views: 11017
Re: Thetis 2.10.0 Released (G2 users take note!)
Why is the TAPR github not setup so issues can be posted? With Ritchie taking a break it would seem like the most likely place for it to get noticed is at the link I posted in the original post.
- Fri Jul 07, 2023 12:48 am
- Forum: Thetis
- Topic: Thetis 2.10.0 Released (G2 users take note!)
- Replies: 48
- Views: 11017
- Fri Jul 07, 2023 12:10 am
- Forum: Thetis
- Topic: Thetis 2.10.0 Released (G2 users take note!)
- Replies: 48
- Views: 11017
Thetis 2.10.0 Released (G2 users take note!)
Introduction & Links Because I was not Johnny-on-the-spot over the weekend, Bill beat me to posting about this new release of Thetis, version 2.10.0. I didn't want to lose the info in the posts below, so Bill has very kindly let me hijack his original post :) The 2.10.0 installer is available i...
- Tue Jun 27, 2023 5:52 pm
- Forum: G2 Operating System & Applications
- Topic: Selecting Balanced XLR input
- Replies: 28
- Views: 4041
Selecting Balanced XLR input
Selecting balanced XLR input. Noticed this from another post. Protocol 2, and with it Thetis or pihpsdr, have no settings to select the XLR balanced microphone input. In time maybe that can be added, but we'd have to check that the changes to the protocol had no effect onto other radios. In the shor...
- Fri Jun 16, 2023 1:31 am
- Forum: Thetis
- Topic: Pull Request On GitHub
- Replies: 2
- Views: 676
Re: Pull Request On GitHub
Thanks Scott for the excellent explanation. I knew when I saw it that it was good news just didn't know to what extent.
- Thu Jun 15, 2023 10:11 pm
- Forum: Thetis
- Topic: Pull Request On GitHub
- Replies: 2
- Views: 676
Pull Request On GitHub
I follow GitHub although I don't fully understand it.
I noticed today that Laurence Baker made a Pull Request on Ritchie's Repository. Does this mean that Ritchie's code will be incorporated in to Laurence's code or Laurence's code into Ritchie's code?
I noticed today that Laurence Baker made a Pull Request on Ritchie's Repository. Does this mean that Ritchie's code will be incorporated in to Laurence's code or Laurence's code into Ritchie's code?
- Wed May 31, 2023 11:48 am
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Andromeda case - punchouts for what fan model?
- Replies: 13
- Views: 7846
- Tue May 30, 2023 3:44 pm
- Forum: Apache-specific Hardware Discussions
- Topic: Abrupt change in freq & correction factor changes
- Replies: 18
- Views: 9387
Re: Abrupt change in freq & correction factor changes
Q5 has signal splitters. You can get it with or without built in reference.
Here is a simple splitter without the reference.
http://q5signal.com/index.php?route=pro ... duct_id=90
Here is a simple splitter without the reference.
http://q5signal.com/index.php?route=pro ... duct_id=90
- Sun May 14, 2023 10:33 pm
- Forum: Thetis
- Topic: Understanding G7KLJ 2.9.0.11 release
- Replies: 127
- Views: 24734
Re: Understanding G7KLJ 2.9.0.11 release
Trucker wrote:Look at the bottom of this page. All is well.
https://github.com/sjk7/Thetis-2.9.0
Ok he has edited that since I last luck. It makes sense after reading he is just doing some house cleaning and reorganizing.
- Sun May 14, 2023 7:57 pm
- Forum: Thetis
- Topic: Understanding G7KLJ 2.9.0.11 release
- Replies: 127
- Views: 24734
Re: Understanding G7KLJ 2.9.0.11 release
What I meant. Late last night local time Steve closed a lot of items and stated Parallel Universe. I imagine around the same time the releases disappeared. Steve has made great progress and done a lot of hard work developing. I would hate to see him stop and be discouraged by someone else's actions.
- Sun May 14, 2023 5:50 pm
- Forum: Thetis
- Topic: Understanding G7KLJ 2.9.0.11 release
- Replies: 127
- Views: 24734
Re: Understanding G7KLJ 2.9.0.11 release
What's the deal with the Parallel Universe and another Branch?
- Tue Apr 25, 2023 11:37 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: DDUtil support for PowerSDR and Thetis has ended (but 3.2.6.22 works OK)
- Replies: 26
- Views: 37312
Re: DDUtil support for PowerSDR and Thetis has ended (but 3.2.6.22 works OK)
Yahoo shut down Groups many years ago so unfortunately that message in the link no longer exist. I do not know if DDUtil migrated to groups.io or not.
- Tue Apr 25, 2023 6:08 pm
- Forum: Amplifiers & Tuners
- Topic: ICOM PW1 CIV with ANAN 7000DLE MKII
- Replies: 12
- Views: 7913
Re: ICOM PW1 CIV with ANAN 7000DLE MKII
Ronnie if you do use DDUtil can you please post how you set it up. I have never used it but would like to try it?
Thanks
Bill K4IBC
Thanks
Bill K4IBC
- Mon Apr 24, 2023 9:33 pm
- Forum: Apache-specific Hardware Discussions
- Topic: 1000 watt protection
- Replies: 8
- Views: 1982
Re: 1000 watt protection
Yeah especially seeing it is using 2 times 1.6K devices. Now just need to interface an automatic tuner on the CAT or via UDP.
- Mon Apr 24, 2023 9:31 pm
- Forum: Amplifiers & Tuners
- Topic: ICOM PW1 CIV with ANAN 7000DLE MKII
- Replies: 12
- Views: 7913
Re: ICOM PW1 CIV with ANAN 7000DLE MKII
No not really open source but no reason you couldn't whip up your own. Here is where to buy the board. They are cheap enough and easy to get. I think it took a week or 2 to get mine from Russia and you can pay with Paypal. The schematic is posted in his pics. https://ra0sms-shop.ru/product/universal...
- Mon Apr 24, 2023 8:20 pm
- Forum: Apache-specific Hardware Discussions
- Topic: 1000 watt protection
- Replies: 8
- Views: 1982
Re: 1000 watt protection
Going to depend on the software developers. We will not know until it is delivered if anything additional will be done hardware wise for protection. It might be possible since the inclusion of the RPi CM4 in the radio now.
- Mon Apr 24, 2023 8:16 pm
- Forum: Amplifiers & Tuners
- Topic: ICOM PW1 CIV with ANAN 7000DLE MKII
- Replies: 12
- Views: 7913
Re: ICOM PW1 CIV with ANAN 7000DLE MKII
It is possible by using Thetis CAT interface out of a serial port. It will be Kenwood CAT protocol. You will need to convert the Kenwood Serial Data to CIV data with an interface board. Here is the information you need. https://community.apache-labs.com/viewtopic.php?f=17&t=3838&p=22305&...
- Mon Apr 24, 2023 4:01 pm
- Forum: Apache Labs News
- Topic: Introducing the ANAN-8000DLE MKII
- Replies: 101
- Views: 123512
Re: Introducing the ANAN-8000DLE MKII
Those devices are capable of 1600 each if driven to max specs. A pair will loaf along at 1500 @ 48VDC. It only needs 35 watts drive. The filters and cooling must be the limiting factor. I am concerned about efficiency. With LDMOS just lowering the drive to reduce the output reduces efficiency and in...
- Sun Apr 16, 2023 1:41 pm
- Forum: Thetis
- Topic: Understanding G7KLJ 2.9.0.11 release
- Replies: 127
- Views: 24734
Re: Understanding G7KLJ 2.9.0.11 release
Please forgive me if I come off as being critical of Steve and Ritchie. It probably comes from me not fully understanding how GitHub works. Anyone that does anything for free to help improve the software is a good thing. I am use to a system where everything is in one place. I was concerned about co...