The problem is NOT that the description is unclear, the problem is that while you are transmitting, you may inadvertently hit that control and change the monitor level instead of the intended behavior of changing the Master AF GAIN. It happens to me all the time which is why I would like two separat...

A quick vid of ongoing, work in progress updates to 2.9.0. https://youtu.be/yVHmV8UDrn8 sliders2.png Richie. Any chance of putting a MONITOR GAIN above the MASTER AF GAIN... Make this independent of the MASTER AF GAIN. Currently MASTER AF GAIN controls 1) The Master AF Gain on Receive when in RECEI...

Thank You...
I am using IK3VIG special...
I copied the buttons into the Console folder and that fixed the problem.

I have a question about the GUI appearance of 2TON in Thetis 2.9.0.3 (also previous versions) This is the appearance when Thetis Starts Up 2Tone-1.png This is the appearance when 2TON is activated 2Tone-2.png This is the appearance after 2TON is deactivated 2Tone-3.png I do not seem to be able to cl...

I figured out what I was doing wrong... Thetis 2.9.0 AUTO AGC GAIN DOES WORK... However, to get the AGC gain to be at about the band noise level, you need to set the dB Offset to about +20.. (or so) the 2.8.11 used 0 db offset to make the green line same as band noise so this was confusing. Then it ...

Well, I guess I stuck with 2.8.11... Furthermore... if you use Memories... 1) there is no place to enable/disable the Auto AGC Gain 2) If you select a memory channel, it wipes out the Auto AGC Gain setting and you have to re-enable it. Is there some action when changing versions between 2.9.0.3 and ...

Can you at least ACKNOWLEDGE that the GUI for 2.8.11 shows it working correctly, and 2.9.0.3 NOT ?

Here is Thetis 2.8.11 Automatic AGC Gain working as it should

I updated to 2.9.0.3 and I claim the Auto AGC Gain is STILL BROKEN: One image is the settings I am using, I INTEND to be just below the band noise so I pick up digital message. the other image is the Thetis GUI... it shows where the AGC Gain is set, clearly not where it should be!!! AGC Gain Setting...

I have been using Thetis 2.8.11 21K8 and it works fine... I upgraded to 2.8.11 21K9 a few days ago and the Automatic AGC Gain Level failed, it set the gain to the max, 120. I then upgraded to 2.9.0.2 today and the same issue, automatic AGC GAIN level is set to max, 120. It seems that the transition ...

I would like to run MULTIPLE instances of Thetis... on the same computer! I have an Apache Labs Anan 100D that I use as a VHF transverter IF on 10 meters (uses protocol 1). I have an Apache Labs Anan 7000 DLE MKii that I use for HF and 6 meters (uses protocol 2). I can run the old PowerSDR (100D) an...

Request separate slider control for Master AF and MON Gain...
The existing MASTER AF GAIN control shares these functions and is switched by the PTT.
This often results in overly loud MON Gain if the control is inadvertently adjusted while transmitting (typically in DJ Controller slider).

Thetis Display Bug? Thetis 2.8.11 21K8 x64 Metis 2.1.18 The first display is CORRECT… -63.3 dBm The second display is WRONG… -180.1 dBm Is this on the Thetis PUNCH LIST to be fixed eventually? Terry G. Glagowski, Ph.D. / W1TR TGG Systems . 25 Hnath Road, Ashford, CT 06278 . (860) 429-9444 (Home Land...

It would be nice... to have a CheckBox on the main GUI to enable/disable
Setup >> Display >> General >> Panadaptor Peak Blobs >> Enabled

Is there any chance that an additional slider could be added to the GUI...
This slider would control the MONITOR GAIN separate from the MASTER AF.
If you happen to accidentally change the MASTER AF while transmitting, it changes the MONITOR GAIN which will probably become TOO HIGH.

Why is there not a separate slider control for MON or SIDETONE level, independent of the AF Master Gain?
This would be both in Thetis and PowerSDR...
most traditional transceivers have a separate control for the monitor level.

Scott,
Using Apache Labs Anan 7000DLE MKii CPU i7...
Getting audio from Speaker 1/4 inch phono jack left rear.
Will it be different from headphone / powered speaker left front?

Thetis 2.6.9 and Orion MK2 FW 1.9 When in CW... BKIN=OFF and using MOX... the power meter reads what you set it to... I prefer FWD/SWR... BKIN=SEMI or BKIN=QSK... the power meter continues reading as an S-METER even when transmitting? Is there going to be a FIX or this??? In SEMI it definitely shoul...

Thetis 2.6.9 and Orion2 FW 1.9 When BKIN=OFF and using MOX for CW, the sidetone can be turned ON/OFF and no latency WRT the keyer paddle. When BKIN=SEMI, and the sidetone is OFF, I hear the TX signal in the monitor but delayed a few ms, totally throws off my sending. When BKIN=SEMI, and the sidetone...

With the Apache Labs 100D, you could use a splitter such as the Anzac THV-50 connected as follows: Terminal B: Common: to Bypass Terminal C: Split 1: to EXT1 Terminal D: Split 2: to RX2 In the Setup / General / Ant/Filters / Antenna, enable the EXT1 checkbox. The 8000 DLE does not appear to have BYP...