You can't expect grandma's old laptop to be able to hit 900+Mbit/s with the USB2 Ethernet dongle, you know what I mean? ;) The big question is: How'd you know my wife (grandma) had an OLD LAPTOP? This is kind of what I thought. Since I saw no issues up front I went back and reset everything to defa...

This subject has opened a discussion of something I'm very interested in. Why? The never ending search for stability in VAC. I had run upon a series of tweaks that can be done on the dedicated NIC for an Anan. Scott. I'm interested in your views and experience with this. I have performed the tweaks ...

Mine installed over the top with no issues. I will do the uninstall/install thing next time. I was done before I remembered I may have needed to do that.

Regarding the PA calibration topic, is there anything I have to do if running a fresh install of Thetis? I noticed my stated wattage output is 100 watts when the drive slider = 50. What do I have to change to make 100 slider = 100 watts? Those are the correct settings for a 7000. So interesting you...

All of the features that have been implemented have been great and I haven't really had any ideas at all. One just came to mind. MAYBE I have been a ham for only seven years and much of what I hear and read are new to me. Pertaining to the tuning of Power Amplifier. I have heard discussion around a ...

I have to describe my experience with the PA offset Richie added. I was expecting 10 or 15 minutes on 80 meters. I keyed and adjusted 100 watts with the slider. I then clicked on 10 and adjusted the offset. then 20...ect ect..Within maybe less than 4 minutes I had 80 meters complete. I wish I had ti...

Btw muted audio at startup is fixed, rear speaker mute box works too ah that is good. There was a considerable amount of work related to this and TXinhibit from Rick and Scott. I think is was close to a week of emailing, documentation, thetis code review and firmware trawling. @everyone Thanks for ...

I've just updated to the latest release. I'm not getting the same Tune slider descriptions as in the video . What have I done wrong? You have 2 things that you can turn on: Settings > Transmit > Tune > Use Tune Slider Settings > Test > Two Tone Test > Use Tune Slider DUH!!! I knew I should have wat...

I've just updated to the latest release. I'm not getting the same Tune slider descriptions as in the video . What have I done wrong?

7000DLE MKII P2- v2.1.18

The internal RF signal paths on the 7000 do not support EXT for external PureSignal feedback from a coupler. You have to use the Bypass input and select the option for Bypass on TX. Be careful with the CleanRF product. The adjustable versions are easily capable of generating feedback levels that ca...

The internal RF signal paths on the 7000 do not support EXT for external PureSignal feedback from a coupler. You have to use the Bypass input and select the option for Bypass on TX. Be careful with the CleanRF product. The adjustable versions are easily capable of generating feedback levels that ca...

I recently moved to a new home (new to me). I've been trudging through getting things reconnected and tuned. Today I connected and tuned the AL-80B amplifier. On the output of the amp I have an RF sampler that I was previously using without issue. The brand is CleanRF. I have the output of the sampl...

This normal with the installer. There are files that appear being accessed by the system. The installer will either kill the process and continue or force a reboot. I was surprised, Ruben. In eight or so years I've never once installed PowerSDR or Thetis and got a message a reboot was necessary. Me...

w-u-2-o wrote:@ramdor

Richie,

I'm getting this warning with the 2.9.0.1 installer. Is this right?

Capture.JPG

Cheers,

Scott

This normal with the installer. There are files that appear being accessed by the system. The installer will either kill the process and continue or
force a reboot.

I updated last night 2.9.0 and again this morning the updated version. No problems with either. My 60 meter channels were good also. All were there.
Thanks!

On the Width filter slider just above the Shift slider. The width slider will only adjust with the mouse wheel in a narrowing direction. It will also adjust in the same direction by clicking the left mouse button in the open area to the left side of the adjuster. The only way it will widen is to lef...

Hello Scott, after the 2.8.11 release of Thetis, as far as I know, Richie made some more modifications to PureSignal 2. (As of today 21K9) Can you add/explain these changes here in this thread? For example: "Quick Attenuate Response" I'm not going to attempt to explain them. My terminolog...

I tried an older database and got my Band Stack back. And also a clean database shows "Band Stack 2".... If I understand the manual correctly the first number (left) is which band stack you are currently on. The second number (light) is the number of entries in the back stack you are on. ...

Thetis Only cpu% on the status bar will mirror that of Thetis.exe in the Details tab of taskmanager. I'll refresh my database and see if that improves anything. If everything else keeps working as wonderfully as it does the cpu% on the status bar can do what it wants to do. I mentioned it because I...

I have followed and updated Thetis as soon as Richie has released. This thread has been interesting. I watch closely the voltage reading in the bottom left corner of the GUI. as far as the CPU load goes I don't. Since this trad started I have started watching the CPU load. I use Thetis 64 bit versio...

It should be enough to remind the operator to ID. You don't want a timer just throwing out ID transmissions randomly, probably over the top of someone else's transmission. It's amazing how lazy people want to be when it comes to the relatively trivial responsibility of properly ID'ing. At the end o...

turn 'only during mox' option OFF, and click the clock on the status bar to stop/start it. It will continue to run, timeout, and reset and run if you have reset on mox turned on. R. There are a lot of options for the QSO timer, perhaps too many. FWIW, I recommend only turning on "Reset on expi...

NC3Z wrote:
A useful option would be a setting to make the timer start with Thetis, or maybe on the first PTT.

My preference would be for the timer starting on first PTT.

Ruben, will the timer already built in not work? Screenshot 2022-03-13 170957.png Gary, Yes it could and I have already thought of that. The issue is that the QSO timer only runs during MOX. There is a box labeled "Only during MOX". I thought if I were to remove the check mark it might st...

Richie, I know this would be way down on the list, but would it be possible to add a 10 minute timer with some sort of visual or audio que? I do lot of ragchew and have a difficult time giving my ID every 10 minutes. I have had a life full of a really good feel for timing issues. 10 minutes eludes m...

I have 12 occurrences of 0x8899000C between October of 2020 through November of 2021. Nothing else since then. Edit: Richie: Great work on all updates. I've had no issues and if there has been any glitches it was my fault. :mrgreen: . I run it in the latest version of Windows 11 from the Dev channel...

I would not let the possibility of "bricking" put you off to buying an Apache-Labs Anan. I've had my 7000 DLE mkII over two years now. I have loaded and tried different firmware many times. I've never had the slightest hiccup. You won't go wrong in the purchase of an Anan. The flexibility ...

Happy New Year!

I've been trying to break 21k8 since yesterday. No issues at this point. Thank you very much for the update!

Hello Scott and Richie,

Thank you both and everyone else for all the help and advice in 2021. This is a great bunch of folks. May 2022 be a better year.
HAPPY NEW YEAR!