Hi Scott, That's good news. Since I have never used scopes, a little hand-holding is required. I know it's too much to ask for but a mentor must do it once and I would quickly learn. Is there a video on how to use it to test LPF for HF amplifiers? I could not find it. A block diagram to connect Anan...

Dear Richie & Ernst, You guys are simply amazing. The final product looks great. Loving it. Richie, whenever you have time to spare, kindly have a look at your to-do list. There is a request listed to widen the DRM filter from 10Khz to 20khz as the newer DRM transmissions employ wider signals. T...

Hello,

Just curious to know if Anan radios be used as spectrum analysers to test say Low pass filters.
A decade ago there was a project called Cyclopes under test.

SDR Play has software for the spectrum analyser program. Do we have something?
Thank you,

73
Bhanu
VU2MB

Sorry, Guys, My posts except the last one were related to the topic till I found out that it's hardware and not software related and in the last post, I disclosed it. Now I would request the moderator to move these to the appropriate place or else I will delete them. Thank you, Richie 73 VU2MB TX Me...

Update I have uninstalled and deleted folders from the user folder. Installed V2.9.6 and fresh wisdom files were created. TX Meter is still not working while other features like leveller, Mic meter etc are working. I have changed the radio to 100D and TX Meter is working. So there is something wrong...

Nope, I haven't built it.
Downloaded from a link in this forum.
Which one is your latest with the metering Richie?
I am going back to your last version 2.9.0.6

73

Dear Richie, Thanks for your response. Yeah, I know the main meter should not be affected. Now, none of the meters (Main or Kenwood) shows TX output. A screenshot is attached. In my version of Thetis Multimeter2 option is not there. I am transmitting 25W on a random 12M freq in FT8 mode. What I must...

Hello, Last night I downloaded the meter skin file .exe from GitHub and installed it. It created a new folder. I could not change the default meter though using ANAN 200D. Everything was working as always. When I switched on the PC and ran Thetis this morning, I realised my TX Meter is not working. ...

Hello friends, I am using N1MM for the contests till now and from now on would love to use WriteLog V12 I have purchased a license a few hours ago and I am able to connect CAT & VAC but doing something wrong and it is not transmitting or goes in continuous transmissions on some settings and quit...

Dear Scot, Whether I am using anan 100d or 200d network cable remains the same. 200d works with MacBook and thunderbolt 2 ethernet converter. Protocol was P2 IP was static in both radios. In any of the pcs if 200d P2 was not working and showing 100mbps and instant swap with 100d P2 was having no iss...

Dear Scot, Static IP is programmed into Anan and PC. Today I downgraded ANAN 200D to Protocol 1 as the speed I was getting is 100mbps and immediately it was detected and working. I would like to go back to Protocol 2. It's a direct connection between the ethernet port of Alienware PC & Anan. MY ...

Hi Dear Scot,

Thanks for looking into it.

192.168.1.103 on PC & 192.168.1.100 on the Anan

Thank you

Hello, I have been having a strange issue that my Anan 200d only communicates with Macbook pro 13 on a Bootcamp partition running windows 10 and using a thunderbolt to ethernet converter. it does not work with any other laptop or desktop including a brand-new Alienware Desktop. It's running Protocol...

Please see link for details: https://apache-labs.com/al-products/1048/ANAN-8000DLE-MKII-HF--6M-200W-SDR-Transceiver.html 73, Abhi It's a welcome initiative. My 2 cents - it adds just 4 db's to the ANAN-8000DLE and is overkill for BLF-188XR rated for 1500W but it will run cooler though. A suggestion...

[quote="w-u-2-o"]OK, so the same old 8000 if you don't quibble about the revision of the Orion MKII, but without the annoying front panel, the complexity of the internal 50V upconverter, and smaller dimensions. All welcome changes, plus the lower price. However, there must be a 50 to 12VDC...

Thanks, Richie,

Amazing new features and profiles.
Thanks a ton for all these new features.
I am away from radio for 10 weeks and shortly will be able to
lay my hands on them to play with these new features.


73

Bhanu
VU2MB

I agree.

Thank you

73
Bhanu

Thank you, Mike and Scott Cost including airmail to the US comes to Euro 84.99 is equal to $91.71 Way too expensive for a piece of less than 50 gms of copper. If there is demand, (50 pcs) I can get it made in India with some modification and sell it for less than 35% shipped. Will be making it for m...

Dear Scott,

Thank you very much.

73
Bhanu
VU2MB

Hi Scott,

Yes, i have seen the link in the comments but I could not find the tool after scanning numerous pages on the website.
Hence I asked for help.
Did you find it there?

73
Bhanu

Hi Richie, I would request you to provide additional wide filters 20 kHz for DRM as the new pure DRM broadcasts are 18/20 kHz wide and we cant decode these new broadcasts. PowerSDR and DRM mode must have been incorporated 15 years ago when 9/10 kHz filters. This is the most appropriate time to revi...

Hello,

I am interested in SO2R using 2 ANAN transceivers.
What sort of hardware do I need?
I find the topic a little confusing hence I need guidance from friends here.

Also, what are the alternatives to receiver guard sold by DX Engineering DXE-RG5000HD?

Thank you,

73
Bhanu
Vu2MB

Hello ! I have come across a video showing a nice little tool (A special tip for Soldering iron) to desolder LDMOS like BLF 188/189 and similar. Would appreciate if anyone knows from where it can be sourced, especially in the US as I am here these days. This can be made locally from a 3mm copper pla...

Ron, There is some information available starting on page 50 of the WDSP Guide: https://github.com/TAPR/OpenHPSDR-wdsp Also, at 13 minutes into this presentation: https://youtu.be/OuDcMZv7NxY Finally, this presentation, while not discussion NR2, is nevertheless also interesting. It concentrates on ...

w-u-2-o wrote:I didn't even know there was an Apache FB group!

Interesting, but I'll just concentrate my effort in one place, here

Thanks!

That Facebook group has nothing to do with Apache labs AFAIK

Dear Mark K1LSB, Roger about the ground. I have now installed PolyPhaser IS-50UX-CO and it's costlier at around $85 and it is like paying an insurance premium yet will not be getting any benefits of it and it's useless unless there is a path to ground connected with it. My tower is grounded with the...

Gary K9RX This love and hate relationship is valid and I am in the same boat but for a different reason. Whenever I have something wrong with software particularly the expert in this forum are always there to help but my issue is always hardware and its nothing to do with product performance but a m...

For the same reason, I have not opened the box and taken out PK-232SC+ to the shack table.
Spent around $650 few years ago. Used MBX till late 90's
I am sure it has better filters though.

73
Bhanu
VU2MB

I'm not sure if this is the same thing you are experiencing but I can say I was never able to get N1MM+ to work on CW natively .... I was told by some they had it working - and others it was not working. Frustrating to say the least. I ended up having to go to a K1EL external device which now drive...

Dear Scott, Thanks for your response and I have found the reason why it was doing all strange things like triggering PTT when clicking CW Break in SEMI. We had a visitor with his 5 years son and while he was roaming around he must have come to the shack and put the headphone Mic connector to the Ana...