Issue Resolved I was able to fix my sequence error issue by simply swapping around cat cables and connecting the radio direct to the motherboard's Ethernet port and the rest of my network is connected to the add on PCi-E NIC card. Now I can run the G2 from the MB Ethernet port, My Expert Electronic...

What can I say I'm new around here
I had a 200W 8000DLE years ago but did not keep it long enough to fully understand it but now I own a G2-100 and look forward to learning as much as I can.
So far with the exception of a few bugs it's a very nice radio!

I agree Art since all of the older radios are now discontinued it's time to move on and focus on the G2 radios and update software to make the most of the new platform. I'm not against new updates for the older radios and I think continued support for the older radios is a good thing but I think a G...

There are 3 ports, 1 is on the MB the other 2 are on the pci-e card. I agree I also think the seq errors are network related. I currently have the radio on the Dual port card and internet on the MB NIC, I will try swapping those and see what happens. Yes audio issues sure looks like a codec issue wi...

Yes, windows 11 Pro does cause issues, also have you tried updating the Ethernet drivers? I would also recommend enabling the "Network throttle index tweak" in Setup----H/W Select tab (network settings). Tony The system is only a few months old but I am still using Win10, Yes all drivers ...

Here is a video to show some issues I am having with my new G2-100W and Thetis V2.10.0. Sequence Errors and Audio Issues. Radio is connected direct to PC via Intel® Ethernet Controller I226 and only G2 radio mic input and speaker output for TX/RX audio. NO VAC is used! https://youtu.be/5Fw28hC7jOw ...

Same here on G2-100W no panel, No Monitor audio with Thetis 2.10.0 with headphone or speaker outputs.

I also have other audio issues such as when I open RX2 there is no audio from RX2 until I stop and start Thetis.
Then when I close RX2 there is No audio from RX1 until I stop then start Thetis?

That doesn't bode well. The GigE interface on the Pi was supposed to fix this problem once and for all. How are you connected between the PC and the G2? I am connected directly from PC to G2 via Intel I226V pci-E card. -Other strange issue is with receive audio for example when I enable RX2 there i...

With my new G2-100 I get errors from the time I start Thetis in receive as follows:
-Sequence error 256 (DDC2) in red
-Sequence error 256 (Mic) in red
-Sequence error 8 (DDC2) in red
-Sequence error 264 (DDC2 Mic) in red
Not sure what the issue is?

For the new G2-100W without control/display panel what wireless keyboard/mouse is plug and play with the built in Pi computer?

The G2-100W Units are starting to ship and we will see pics and videos soon. One thing I will say is Apache Labs may be slow with communication however I think they are a little better lately and not so good with keeping the website up to date and it may take a while to get your new radio but I rare...

I don't yet have a photograph of it. If I did. it would already be in the manual. But where the prototype picture shows a mini XLR, the connector on the production unit is a 6.1mm stereo jack plug; or 1/4" jack plug in imperial units. OK Got it 1/4" or 6.35mm TRS female jack. OK that's no...

kc2rgw wrote:Seems it’s a 1/4” TRS jack.

So it's 1/4"TRS not XLR?

The manual says 6.3mm jack??

Now I'm lost....

Just to be clear is there a 3pin XLR or Mini XLR connector on the back of the radio as shown in the photo on the website?

I would also like to see a pin-out of all of the connectors on the G2-100W so I will know what I need to make up cables. At this point there should be some basic documentation for these new radios. I understand if a proper manual has not been created but we need some basic info on the connectors. I ...

The real mystery is what kind of "XLR" connector will actually be on the rear panel, for those that wish to use it. So far from the picture it looks like a Mini Male XLR 3pin but can not say for sure as the picture is a bit fuzzy. It would be nice if we can get some basic info on the I/O ...

What cables will the new G2-100W come with or what cables will I need?
I just want to be ready when the new radio arrives.

It is my understanding that this manufacturing delay only applies to the G1 (Gen 1) radios but does not affect the new G2 Saturn based radios. This is due to the fact that the main processor that the Gen1 radios use is no longer available and should not affect the G2 radios as they use a different a...

"I got very sad news to me today. Dont know about others. The store where I placed the order in October 2022, sent me an email that the radio is on a 2 year availability delay. Therefore, no longer being offered by the store." Contact Apache Labs show them a copy of you invoice and they m...

What version of Thetis are we supposed to use with the new G2 radios?

Does anyone remember this TV commercial from the 70's I think the applies to the new radios

I'll pontificate: to make best use of that series jack (whether standard or mini XLR) requires passing a screw through the panel to avoid the so-called "Pin 1 Problem." It's almost certain that PCB-mount jacks will be used. Although difficult to see, Neutrik provides a conductive strap be...

You’re probably correct Scott. My thinking was that it would most likely be female XLR mini. I say that because most if not all audio interfaces use a female type connector whether it’s a XLR, 1/4” inch TPS or 1/8 inch TPS. I was just trying to look ahead to have everything I need here in the shack...

vu2mb wrote:Here it is

https://apache-labs.com/download_file.p ... ds_id=1020

73
Bhanu
VU2MB

Thank You for the link!

Where can I find the latest operation manual for Thetis 2.9.0.X. I am new to Thetis and want to learn everything I can about the software.
Thanks

It's the thermal management I am curious about, A 1000W+ is a lot of heat to dissipate! My guess is since it’s still the same heat sink as in prior versions of the 8000 its going to need a lot of Hi-Speed/CFM fans for cooling so fan noise may be an issue for heavy users? Anyway it’s all speculation...

Here is the answer on asking for an update on the 8000DLE MKII 500 Watt. Hello, We have been working with the technical support of Intel over the past few weeks and it seems that the last batch of Cyclone V devices received by us have a hardware issue which cannot be resolved, hence they have recal...

Is there any way to get a few more pictures of the G2 model without front panel?
Would like to see the top, bottom and front of the unit.
Thanks

Yes my CC was rejecting payment but all is fine now.
Now the waiting begins