Protocol 2 upgrade problems 7000DLE mkII

Bricked your radio? Can't get it to program? Ask here...
Post Reply
W7SS
Posts: 5
Joined: Tue Aug 02, 2022 4:58 pm

Protocol 2 upgrade problems 7000DLE mkII

Post by W7SS »

I've had my 7000DLE for a few years and finally decided to upgrade to Protocol 2 (V2.1.18).
Now Thetis (v2.9.0.6) doesn't show any activity RX on the panafall anymore.
The radio appears to transmit okay. After unkeying the transmitter the TX signal remains on the panafall display.
Any suggestions?

Ken (W7SS)
User avatar
w-u-2-o
Posts: 5941
Joined: Fri Mar 10, 2017 1:47 pm

Re: Protocol 2 upgrade problems 7000DLE mkII

Post by w-u-2-o »

The no RX, TX OK problem is Windows Firewall. Run the firewall check in Setup, disable/modify Windows firewall as necessary.

P2 uses different ports than P1 and your firewall is not set up for it.
W7SS
Posts: 5
Joined: Tue Aug 02, 2022 4:58 pm

Re: Protocol 2 upgrade problems 7000DLE mkII

Post by W7SS »

That fixed it, thanks.
Post Reply

Return to “Upgrading/Downgrading”