Firmware

FIRMWARE TOPICS ONLY--non-firmware topics will be MOVED
LA0GE
Posts: 5
Joined: Mon Mar 02, 2020 4:32 pm

Firmware

Postby LA0GE » Wed May 11, 2022 6:49 pm

Hi.
I have just bought a 100D with firmware 3.7.
Whats the latest and greatest firmware for the 100D?
I'm using the latest version of Thetis now.

Thanks
Bent LA0GE
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Firmware

Postby w-u-2-o » Wed May 11, 2022 9:18 pm

For Protocol 1 firmware, which is what you should probably start with, your answer is right here in this forum where you posted:

Capture.JPG
Capture.JPG (156.76 KiB) Viewed 29394 times


For Protocol 2 firmware, that's a much more complex topic. It is best if you read the "New Protocol explained" and Angelia "tacked" topics at the following link first:

viewforum.php?f=32
LA0GE
Posts: 5
Joined: Mon Mar 02, 2020 4:32 pm

Re: Firmware

Postby LA0GE » Wed May 11, 2022 11:19 pm

Hi and thanks for info.
Reason for asking which is the greatest was that I read some complaints about
PS not working in V6.0 so I thought maybe one of the earlier ones works better?
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Firmware

Postby w-u-2-o » Thu May 12, 2022 1:38 am

AFAIK 6.0 is good to go.
LA0GE
Posts: 5
Joined: Mon Mar 02, 2020 4:32 pm

Re: Firmware

Postby LA0GE » Thu May 12, 2022 8:23 pm

Hi.
Just installed 6.0 without problems.
Not tried PS yet so will have to see about that.
So far I have got everything working as I want.
Connected to Log4om and Jtdx via TCI and also N1MM with cw is working
as it should so now I'm ready for CQWW WPX :)
Next on the list is to get my Q5 transverters working and then compare it to my
Sunsdr2 DX.
Thanks again
Bent

Return to “Angelia Firmware (100D)”