apache-labs.com

My 7000dle arrived from the uk dealer today after ordering on Saturday - got lucky I guess in using a dealer who had bought a few in. It has serial number 0004 on it and its still warming up at home after unpacking at lunchtime after a cold journey up from London to west Wales. I am looking forward to hooking it up to my lan this evening and trying it out on the hpsdr mrx ps software I installed at the weekend.

My radio has the lettering on the front ok.

No doubt I will be making even more use of this community shortly as I get to know the radio and the client software - I have straight from ssdr and a flex 6300, so hpsdr is all new to me.

Well, we have had our Anan 7000dle for 19 days now with no issues, glitches or anything noted. As mentioned earlier I did receive mine with some silk screening absent from the front cover panel. Apache-Labs did send us a new proper front cover panel with all lettering and it's been installed and all is well. In fact, we just changed it out today.

Some have mentioned they felt the cooling fan was noisier than they thought it should be but I am hard pressed to hear it here on this radio
serial 0020. I do not find it objectionable at all. One thing, after hours of operation I can place my hand on the case and find it to be cool to the touch so cooling seems to be fine.

So far we are very pleased with this radio.

Hello Jim,

can you please send me a recording of YOUR 7000 fan noise?

Thanks

Volker

DL4ZBG

All,

What is going on with the 7000DLE radio production? I have had one on order with Gigaparts for several months now, and it's nowhere in sight.

Thanks
Ernie
W2FMU

Hello Ernie,

The radios start shipping again early next week, the factory was closed for the holidays,

73,
Abhi

Hi Abhi,

Do you have any distributors in S.E. Asia for the 7000DLE?

Thanks
Jason
9V1AM

Hello,
i have 2 questions: (Anan 7000)

1) it's normal if I use the external ptt in CW mode the radio does not switch in transmission?
(openHPSDR switch in tx but the anan 7000 no...not hear relay switch)
with o without the "semi-bk"

2) again in CW, I noticed that sometimes if I switch in TX/RX via cat (ZZTX) (contest software),
sometimes back in rx but I do not hear the audio but the waterfall works fine.
Returning to tx and then rx the audio come back (or set VAC1 on/off)

Many thanks
Fabio

Seems the US distributors are out of stock now. I wonder how many 7000's were shipped to the US in that first batch?