On another forum, someone reminded me that before switching to a different Protocol 2 version (going up or down), I should uninstall Thetis completely first I don't think I have ever done that and have merely switched to another Protocol 2 version using Boot Loader.
Do I need to completely purge Thetis from my machine prior to bouncing to another Protocol 2 version?
73,
Juha
NI2M
Need to uninstall Thetis prior to switching between P2 versions?
Forum rules
Until such time as the New Protocol firmware goes into general release, all discussion will be concentrated here.
Until such time as the New Protocol firmware goes into general release, all discussion will be concentrated here.
Need to uninstall Thetis prior to switching between P2 versions?
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Re: Need to uninstall Thetis prior to switching between P2 versions?
Absolutely not. That is superstition at its finest.
Re: Need to uninstall Thetis prior to switching between P2 versions?
That's what I was thinking .
Juha
NI2M
Juha
NI2M
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Re: Need to uninstall Thetis prior to switching between P2 versions?
Before I switch protocols I hold my left foot 6.2 inches from the floor while quacking twice. Then I feel that the Chee is just right for the change. I've had no problems with this at all. I also use this method of putting my shoes on. (sorry-I couldn't let this go by)
73
Ruben
NB4R
Apache-Labs Anan 7000DLE MKII Black -- Thetis 2.10.3.6 dev_3 -- Windows 11
Ruben
NB4R
Apache-Labs Anan 7000DLE MKII Black -- Thetis 2.10.3.6 dev_3 -- Windows 11