P2 Latest firmware

FIRMWARE TOPICS ONLY--non-firmware topics will be MOVED
Forum rules
Until such time as the New Protocol firmware goes into general release, all discussion will be concentrated here.
Post Reply
ww1wxradio
Posts: 7
Joined: Tue Jul 02, 2024 1:17 pm

P2 Latest firmware

Post by ww1wxradio »

I have a 7000 Mk 2 DLE with Orion MK II board and looking for latest firmware. I currently have 2.0.0.Protocol 2.

What is the latest and where can I find it. Been searching but no luck

Steve . . . WW1WX . . . 73
User avatar
WR1S
Posts: 23
Joined: Thu Feb 13, 2020 3:29 am
Location: Cape Cod, USA
Contact:

Re: P2 Latest firmware

Post by WR1S »

ww1wxradio wrote:I have a 7000 Mk 2 DLE with Orion MK II board and looking for latest firmware. I currently have 2.0.0.Protocol 2.

What is the latest and where can I find it. Been searching but no luck

Steve . . . WW1WX . . . 73
Take a look at this thread: viewtopic.php?f=32&t=4972
Rick, WR1S
7000DLE MKII
ww1wxradio
Posts: 7
Joined: Tue Jul 02, 2024 1:17 pm

Re: P2 Latest firmware

Post by ww1wxradio »

Thanks for the info . . . Latest I was able to find was 2.1.18 . . . Downloaded and will update tomorrow
User avatar
rbduck
Posts: 350
Joined: Tue Dec 03, 2019 1:49 pm

Re: P2 Latest firmware

Post by rbduck »

ww1wxradio wrote:Thanks for the info . . . Latest I was able to find was 2.1.18 . . . Downloaded and will update tomorrow
I am running version 2.2.2 in my MKII. There are two newer ones at the link that Rick posted above.
73
Ruben
NB4R
Apache-Labs Anan 7000DLE MKII -- Windows 11
User avatar
I2NOY
Posts: 121
Joined: Thu Mar 25, 2021 10:44 am
Location: Milano - Italy

Re: P2 Latest firmware

Post by I2NOY »

Me 2. ;)

P.S. firmware 2.2.1 and 2.2.2 fixed the issue of RF power on RX input when you transmit.
User avatar
WR1S
Posts: 23
Joined: Thu Feb 13, 2020 3:29 am
Location: Cape Cod, USA
Contact:

Re: P2 Latest firmware

Post by WR1S »

ww1wxradio wrote:Thanks for the info . . . Latest I was able to find was 2.1.18 . . . Downloaded and will update tomorrow
Steve,

Assuming your Mk/II has this FPGA you can use one of these from the link I previously provided:

ANAN-7000/8000 MkI/II
EP4CGX150F896 Cyclone IV series FPGA
https://www.dropbox.com/scl/fi/r8o8iict ... 2zb55&dl=0
https://www.dropbox.com/scl/fi/vvk1c16q ... 6w2lu&dl=0
Rick, WR1S
7000DLE MKII
Post Reply

Return to “Protocol 2 Firmware (all radios)”