Hi all,
I was now searching for quite a while but couldn't really find any folder or GitHub address for brand new latest beta firmware versions.
As an example - for the Orion MKII board in my ANAN 7000 there are 2 known preliminary firmware versions available, called Version 2_1 and 2_2.....at Github there is still only Version v1.9.
Think most of you are better informed than I, but since I already know of certain other hams who cant't direct themselve to the latest beta Versions as well I thought I open this Topic right here.
- Can anybody help me please on how to find the latest and greatest preliminray Firmware Versions for
- Orion MKII (only protocol 2)
- ANAN 10 (16 bit - Hermes - only protocol 2)
Especially on the Hermes board there is still this well known annoying issue that PS-A (Pure Signal) doesn't work in automode - only when using Singel Calibration. May be there is still anything better than v10.7?
Many thanks to all who can help here in advance! Have a great Christmas time!
73,
Andy - DL6EAT (W6EAT)
Preliminary F/W-versions - where to find?
Forum rules
Until such time as the New Protocol firmware goes into general release, all discussion will be concentrated here.
Until such time as the New Protocol firmware goes into general release, all discussion will be concentrated here.
Preliminary F/W-versions - where to find?
No knobs, Pure Signal and Thetis (open source)
ANAN 7000, ANAN 10, Intel NUC 8i7 32 GB + 16 GB Optane
ANAN 7000, ANAN 10, Intel NUC 8i7 32 GB + 16 GB Optane
Re: Preliminary F/W-versions - where to find?
For 16-bit Hermes, what you see in Github is all there is right now.
For the Orion MKII:
For the Orion MKII:
Re: Preliminary F/W-versions - where to find?
Thanks Scott,
I couldn't see that interesting folder before - may be my browser is playing it's own games here - I am currently travelling in Egypt.
Well, regarding the "old" ANAN-10 I was hoping that also in this area new preliminary F/W Versions come out from time to time.
It became pretty quite there at least....
Certainly not important but having Pure Signal also in auto-mode would be simply a real and great upgrade.
Think there are also many Hermes-boards out there - in addition there are many replicas by Gerd Loch (Berlin).
So the installed base should be huge.
Happy Christmas-time,
73,
Andy - SU/DL6EAT
I couldn't see that interesting folder before - may be my browser is playing it's own games here - I am currently travelling in Egypt.
Well, regarding the "old" ANAN-10 I was hoping that also in this area new preliminary F/W Versions come out from time to time.
It became pretty quite there at least....
Certainly not important but having Pure Signal also in auto-mode would be simply a real and great upgrade.
Think there are also many Hermes-boards out there - in addition there are many replicas by Gerd Loch (Berlin).
So the installed base should be huge.
Happy Christmas-time,
73,
Andy - SU/DL6EAT
No knobs, Pure Signal and Thetis (open source)
ANAN 7000, ANAN 10, Intel NUC 8i7 32 GB + 16 GB Optane
ANAN 7000, ANAN 10, Intel NUC 8i7 32 GB + 16 GB Optane