Dear Gentleman Ihave an ANAN 7000DLE MKII Black face.
The serial number is DX 8300503A .
Is anybody can help me to find the new correct version of the protocol 2 firmware?
The Metis_Orion_MkII_Protocol_2_v2.2.1 and 2.2.2 doesn't work with my device
Best Regards
Ermanno Ronchetti
Anan 7000 DLE MKII new firmware protocol2
Forum rules
Until such time as the New Protocol firmware goes into general release, all discussion will be concentrated here.
Until such time as the New Protocol firmware goes into general release, all discussion will be concentrated here.
Re: Anan 7000 DLE MKII new firmware protocol2
Please send us a printscreen of the message you get from the firmware installer.
73, Hans.
73, Hans.
--
73,
Hans Remeeus (PA0Q/OE3JRC)
https://pa0q.nl
"Communication is about people, the rest is technology"
73,
Hans Remeeus (PA0Q/OE3JRC)
https://pa0q.nl
"Communication is about people, the rest is technology"
Re: Anan 7000 DLE MKII new firmware protocol2
@Ermanno
From the serial number I think you have a EP4CE115F29C8N Cyclone IV series FPGA
for which below is the latest protocol 2 firmware:
https://www.dropbox.com/scl/fi/62ce6ixijhrr9gvdknfim/Metis_Orion_MkIII_Protocol_2_v2.2.3C.rbf?rlkey=vtqv6itevnd2sxu5xb2coioae&dl=0
https://www.dropbox.com/scl/fi/eyn9bcan7n0br9yfx0dwh/Metis_Orion_MkIII_Protocol_2_v2.2.3J.rbf?rlkey=kre9b6e1gkq3ic4yyw3z40ar9&dl=0
From the serial number I think you have a EP4CE115F29C8N Cyclone IV series FPGA
for which below is the latest protocol 2 firmware:
https://www.dropbox.com/scl/fi/62ce6ixijhrr9gvdknfim/Metis_Orion_MkIII_Protocol_2_v2.2.3C.rbf?rlkey=vtqv6itevnd2sxu5xb2coioae&dl=0
https://www.dropbox.com/scl/fi/eyn9bcan7n0br9yfx0dwh/Metis_Orion_MkIII_Protocol_2_v2.2.3J.rbf?rlkey=kre9b6e1gkq3ic4yyw3z40ar9&dl=0
Re: Anan 7000 DLE MKII new firmware protocol2
Thank you Hans and Richard for replay.
I tried the 2.2.3 and it does work correctly.
What's the difference between this versuion ed 2.2.3j ?
On the face of my device there is MK II but this version is for MK III , in any case it does work.
Thank you very much.
Ermanno
I tried the 2.2.3 and it does work correctly.
What's the difference between this versuion ed 2.2.3j ?
On the face of my device there is MK II but this version is for MK III , in any case it does work.
Thank you very much.
Ermanno