PowerSDR and Thetis keyboard shortcuts for your control surfaces
Posted: Thu Sep 22, 2022 12:40 pm
These keyboard shortcuts originally obtained at https://openhpsdr.org/wiki/index.php?title=PowerSDR_Keyboard_Shortcut_List
It is not known if these are all accurate and still functional in either PowerSDR mRX PS or Thetis. Please post additions and corrections below.
Do not make this topic about programming your control surface. Posts in this topic about anything other than the accuracy and completeness of this list will be deleted without notice or discussion.
UPDATE 26 Sep 2022 for Thetis courtesy Ron, VK3IO
* = default setting in Setup > Keyboard, configurable on that setup screen.
space bar TX/RX Toggle after MOX is on until you click on any other button of the GUI
- Master AF gain decrease
+ Master AF gain increase
* Mute Toggle
[ XIT Up (10 Hz increments)
A Freq. Down 1 MHz*
B Filter Up*
D Freq. Down 10 KHz*
E Freq. Up 10 KHz*
F Freq Down 1 KHz*
G Freq Down 100 Hz*
H Freq Down 10 Hz*
I RIT Down* (10 Hz increments)
J Freq Down 1 Hz*
K IF Shift Left
L IF Shift Right
M Band Change Up*
N Band Change Down*
O RIT Up* (10 Hz increments)
P XIT Down* (10 Hz increments)
Q Freq Up 1 MHz*
R Freq Up 1 KHz*
S Freq Down 100 KHz*
T Freq Up 100 Hz*
U Freq Up 1 Hz*
V Filter Down*
W Freq Up 100 KHz*
X Mode Change Up*
Y Freq Up 10 Hz*
Z Mode Down*
ALT+B Toggle NB On/Off (broken in Thetis, the BPF menu line option interferes with it's operation)
ALT+C CW Form (in collapse mode only in Thetis)
ALT+D Open Diversity Form
ALT+E Open TX Equalizer Form
ALT+F Filter Wider
ALT+G Copy VFO A to VFO B
ALT+H Copy VFO B to VFO A
ALT+I IF Shift Reset (centered)
ALT+M Memory Form
ALT+N Toggle NB2 On/Off
ALT+Q CW Speed Up
ALT+R RIT Zero
ALT+S Setup Form (not working in Thetis)
ALT+T Toggle TUNE on/off
ALT+V Swap VFOs A/B
ALT+W Wave Form (not working in Thetis)
ALT+X XVTR Form
ALT+Y XIT Zero Beat
ALT+Z Zero Beat
F1 CW Memory 1
F2 CW Memory 2
F3 CW Memory 3
F4 CW Memory 4
F5 CW Memory 5
CTRL+ "up arrow" VFO A Increase freq. by tune step
CTRL+ "down arrow" VFO A decrease freq. by tune step
CTRL+"-" AGC-T Gain Down (not working in Thetis)
CTRL+"+" AGC-T Gain Up (not working in Thetis)
CTRL+A Cycles through AGC modes
CTRL+B Toggle NR on/off
CTRL+C Quick Save
CTRL+D Changes spectral display to Panadapter or Spectrum modes
CTRL+E AGC Gain Decrease
CTRL+F Filter Narrower
CTRL+J IF Shift Decrease
CTRL+L Toggle VFO lock/unlock
CTRL+M Toggle MOX on/off
CTRL+N Toggle ANF on/off
CTRL+P Preamp
CTRL+S Toggle Split on/off
CTRL+R AGC Gain Increase
CTRL+V Quick recall
CTRL+W CW Speed Down
CTRL+ALT+U UCB configuration form
CTRL+"Left Arrow" Tune Step Increase
CTRL+"Right Arrow" Tune Step Decrease
It is not known if these are all accurate and still functional in either PowerSDR mRX PS or Thetis. Please post additions and corrections below.
Do not make this topic about programming your control surface. Posts in this topic about anything other than the accuracy and completeness of this list will be deleted without notice or discussion.
UPDATE 26 Sep 2022 for Thetis courtesy Ron, VK3IO
* = default setting in Setup > Keyboard, configurable on that setup screen.
space bar TX/RX Toggle after MOX is on until you click on any other button of the GUI
- Master AF gain decrease
+ Master AF gain increase
* Mute Toggle
[ XIT Up (10 Hz increments)
A Freq. Down 1 MHz*
B Filter Up*
D Freq. Down 10 KHz*
E Freq. Up 10 KHz*
F Freq Down 1 KHz*
G Freq Down 100 Hz*
H Freq Down 10 Hz*
I RIT Down* (10 Hz increments)
J Freq Down 1 Hz*
K IF Shift Left
L IF Shift Right
M Band Change Up*
N Band Change Down*
O RIT Up* (10 Hz increments)
P XIT Down* (10 Hz increments)
Q Freq Up 1 MHz*
R Freq Up 1 KHz*
S Freq Down 100 KHz*
T Freq Up 100 Hz*
U Freq Up 1 Hz*
V Filter Down*
W Freq Up 100 KHz*
X Mode Change Up*
Y Freq Up 10 Hz*
Z Mode Down*
ALT+B Toggle NB On/Off (broken in Thetis, the BPF menu line option interferes with it's operation)
ALT+C CW Form (in collapse mode only in Thetis)
ALT+D Open Diversity Form
ALT+E Open TX Equalizer Form
ALT+F Filter Wider
ALT+G Copy VFO A to VFO B
ALT+H Copy VFO B to VFO A
ALT+I IF Shift Reset (centered)
ALT+M Memory Form
ALT+N Toggle NB2 On/Off
ALT+Q CW Speed Up
ALT+R RIT Zero
ALT+S Setup Form (not working in Thetis)
ALT+T Toggle TUNE on/off
ALT+V Swap VFOs A/B
ALT+W Wave Form (not working in Thetis)
ALT+X XVTR Form
ALT+Y XIT Zero Beat
ALT+Z Zero Beat
F1 CW Memory 1
F2 CW Memory 2
F3 CW Memory 3
F4 CW Memory 4
F5 CW Memory 5
CTRL+ "up arrow" VFO A Increase freq. by tune step
CTRL+ "down arrow" VFO A decrease freq. by tune step
CTRL+"-" AGC-T Gain Down (not working in Thetis)
CTRL+"+" AGC-T Gain Up (not working in Thetis)
CTRL+A Cycles through AGC modes
CTRL+B Toggle NR on/off
CTRL+C Quick Save
CTRL+D Changes spectral display to Panadapter or Spectrum modes
CTRL+E AGC Gain Decrease
CTRL+F Filter Narrower
CTRL+J IF Shift Decrease
CTRL+L Toggle VFO lock/unlock
CTRL+M Toggle MOX on/off
CTRL+N Toggle ANF on/off
CTRL+P Preamp
CTRL+S Toggle Split on/off
CTRL+R AGC Gain Increase
CTRL+V Quick recall
CTRL+W CW Speed Down
CTRL+ALT+U UCB configuration form
CTRL+"Left Arrow" Tune Step Increase
CTRL+"Right Arrow" Tune Step Decrease