Hi all, this is Max IU4JNR.
In few days I should receive a pre-loved ANAN7000DLE MK2. I'm not new to SDR, I own a SUNSDR2DX and 2pro and I just sold a Flex6400. I also owned a HL2 and a Hamlab 160-10 based on Red Pitaya.
I try to figure out what is the best solution to exploit my Stream Deck Plus to make it works wih Thetis and it seems there are a couple of solutions. However, what i found in the community forum are "old" discussions, dated nov 22.
Just as a try, I made few keys assignment using the "hotkey switch" in the SD+ software. Although they works, the mouse should stay focused on Thetis to be effective. Having multi-monitor setup this is not going to work.
So my questions are: are there any news on interfacing SD+ ? Any SW like FRstack for Flex? what is the most used/easy solution which keep the focus on Thetis whatever the mouse pointer is?
Thanks in advance
Max IU4JNR
Stream Deck Plus, Again
Re: Stream Deck Plus, Again
Any luck? I have a stream deck that used with my Flex6500. It would be nice to use it once again.
73
Brent N9BC
73
Brent N9BC
73,
N9BC
N9BC
Re: Stream Deck Plus, Again
I'm not a Stream Deck owner, but I believe it is as easy as using a set of .bat files that are executed on Stream Deck button presses to send CAT commands to Thetis.
If I were doing this, I'd install some version of netcat for Windows--I like ncat which is part of the nmap suite. Then you can issue commands like:
echo zzfa00018135100; | ncat -C 127.0.0.1 13013 --send-only
In that example zzfa is the CAT command, 127.0.0.1 is the localhost address, and 13013 is the TCP/IP CAT server port in Thetis. -C adds a CRLF, --send-only closes the connection immediately after sending.
If I were doing this, I'd install some version of netcat for Windows--I like ncat which is part of the nmap suite. Then you can issue commands like:
echo zzfa00018135100; | ncat -C 127.0.0.1 13013 --send-only
In that example zzfa is the CAT command, 127.0.0.1 is the localhost address, and 13013 is the TCP/IP CAT server port in Thetis. -C adds a CRLF, --send-only closes the connection immediately after sending.
Re: Stream Deck Plus, Again
Check out my Video on configuring the StreamDeck with Thetis, it works excellent.
Video
https://www.youtube.com/watch?v=V0_EHNZDLZI&t=65s
LoopMIDI Download
https://www.tobias-erichsen.de/software/loopmidi.html
Video
https://www.youtube.com/watch?v=V0_EHNZDLZI&t=65s
LoopMIDI Download
https://www.tobias-erichsen.de/software/loopmidi.html
Re: Stream Deck Plus, Again
NY8T wrote:Check out my Video on configuring the StreamDeck with Thetis, it works excellent.
Video
https://www.youtube.com/watch?v=V0_EHNZDLZI&t=65s
LoopMIDI Download
https://www.tobias-erichsen.de/software/loopmidi.html
Thank you Larry.
This is working very well for me.
73, Dan KM6CQ
Re: Stream Deck Plus, Again
Rock Solid for me so far.
- Attachments
-
- StreamDeck.jpg (193.63 KiB) Viewed 1449 times
Re: Stream Deck Plus, Again
Yes this is pretty cool Larry. Thank you for sharing the procedure with us.
- Attachments
-
- Screenshot 2024-04-26 at 16.43.51.png (641.23 KiB) Viewed 1343 times
-
- Screenshot 2024-04-26 at 16.40.48.png (630.37 KiB) Viewed 1343 times
-
- Screenshot 2024-04-26 at 16.41.02.png (587.58 KiB) Viewed 1343 times
Return to “Macro & MIDI Controller Software, Hardware & Scripts”