Richie,
In Appearance > RX Display > Grid > Background the Alpha slider no longer works with Disable picDisplay is clicked.
Thetis v2.8.11 - UPDATES and current issues
Re: Thetis v2.8.11 - UPDATES and current issues
Panadapter Gradient may not be working either.
Gary NC3Z
Re: Thetis v2.8.11 - UPDATES and current issues
remove the links a moment, whilst I check this out.
Richie.
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.8.11 - UPDATES and current issues
ramdor wrote:remove the links a moment,
No problem, I just had noticed as my panadapter display was a bit different.
Gary NC3Z
Re: Thetis v2.8.11 - UPDATES and current issues
Ok, post1 updated again, it is still 21k9c however.
Hopefully that fixes it. Caused by the alpha mode change needed to get anything working with VirtualBox, but now has been reverted.
Richie.
Hopefully that fixes it. Caused by the alpha mode change needed to get anything working with VirtualBox, but now has been reverted.
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.8.11 - UPDATES and current issues
Working now Richie. Won't even ask why in the world someone would want to run this in a VirtualBox, seems counter productive to keeping Thetis high performance.
Gary NC3Z
Re: Thetis v2.8.11 - UPDATES and current issues
I don't know either, but interestingly enough Gary, it ran great with one exception, the display of the waterfall
Richie.
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.8.11 - UPDATES and current issues
NC3Z wrote:Working now Richie. Won't even ask why in the world someone would want to run this in a VirtualBox, seems counter productive to keeping Thetis high performance.
There’s a very good reason why someone would. If someone only uses a Mac, you have no choice but to use one like Parallels, and by the way has very little impact on performance if setup correctly.
- Tony EI7BMB
- Posts: 653
- Joined: Sun Apr 09, 2017 2:31 pm
- Location: Dublin
- Contact:
Re: Thetis v2.8.11 - UPDATES and current issues
All good here, thanks Richie
ramdor wrote:Ok, post1 updated again, it is still 21k9c however.
Hopefully that fixes it. Caused by the alpha mode change needed to get anything working with VirtualBox, but now has been reverted.
Richie.
Re: Thetis v2.8.11 - UPDATES and current issues
Hello Richie, all working so good here, thank you so much for the Ignore SEQ errors Box
Thank you for all your work.
Al
73'
Thank you for all your work.
Al
73'
Re: Thetis v2.8.11 - UPDATES and current issues
Hi Richie, following mod in 21k9c broke the CAT communication between Thetis and my SPE Expert 1.5K v2 linear amplifier:
-change: KenwoodAI command broadcast functions moved into delegate system
I am back to 21k9b and CAT is working now.
The connection between PC and SPE Expert is done by an USB to RS-232 dongle by FTDI
-change: KenwoodAI command broadcast functions moved into delegate system
I am back to 21k9b and CAT is working now.
The connection between PC and SPE Expert is done by an USB to RS-232 dongle by FTDI
Re: Thetis v2.8.11 - UPDATES and current issues
I2NOY wrote:Hi Richie, following mod in 21k9c broke the CAT communication between Thetis and my SPE Expert 1.5K v2 linear amplifier:
-change: KenwoodAI command broadcast functions moved into delegate system
I am back to 21k9b and CAT is working now.
The connection between PC and SPE Expert is done by an USB to RS-232 dongle by FTDI
yes issue found in the formatting of the FA/FB strings related to the AI 'broadcast' in 21k9c
Please try 21k9d(pre) x64 : https://bit.ly/377QcQO
[md5:536AFD7815C01408FCA044E380C21E48]
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Thetis v2.8.11 - UPDATES and current issues
With the formal release of 2.9.0 this topic is being closed.
You can find the successor topic for discussion of 2.9.0 bugs and other issues here: viewtopic.php?f=9&t=4132
You can find the successor topic for discussion of 2.9.0 bugs and other issues here: viewtopic.php?f=9&t=4132