Thetis v2.9.0 - Updates and Issues

User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Thetis v2.9.0 - Updates and Issues

Postby w-u-2-o » Sun Apr 17, 2022 6:26 pm

@ramdor

Richie--the Two Tone CAT command is broken.

Two Tone is set to "Use Drive Slider". TUN is set to "Use Fixed Drive".

Using the 2TON button on the UI works as expected: drive power is achieved.

Using zztu1; 2TON is produced at the tune power setting.

If TUN is changed to "Use Drive Slider" then zztu1; asserts drive power, so it would appear that zztu1; is following the TUN settings and not the Two Tone settings while the 2TON UI button is following the proper settings.

If it matters, hardware is an 8000DLE.

Now just waiting for Rob to update button and slider packs ;)
User avatar
dl5tt
Posts: 30
Joined: Sat Apr 17, 2021 1:58 pm
Location: Germany

Re: Thetis v2.9.0 - Updates and Issues

Postby dl5tt » Sun Apr 17, 2022 6:36 pm

oe3ide wrote:Josef, you can copy
ptbAF-head.png to ptbTune-head.png
and
ptbAF-back.png to ptbTune-back.png

73 Ernst


Ernst,

tnx for the hint, its working.
2022-04-17 20_34_17-Window.png
2022-04-17 20_34_17-Window.png (2.79 KiB) Viewed 7827 times

73 Josef
Actual system: ANAN-7000DLE MKII Protocol 2, external PC Ryzen 5600G, direct ethernet connection.
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Sun Apr 17, 2022 7:07 pm

w-u-2-o wrote:@ramdor

Richie--the Two Tone CAT command is broken.

Two Tone is set to "Use Drive Slider". TUN is set to "Use Fixed Drive".

Using the 2TON button on the UI works as expected: drive power is achieved.

Using zztu1; 2TON is produced at the tune power setting.

If TUN is changed to "Use Drive Slider" then zztu1; asserts drive power, so it would appear that zztu1; is following the TUN settings and not the Two Tone settings while the 2TON UI button is following the proper settings.

If it matters, hardware is an 8000DLE.

Now just waiting for Rob to update button and slider packs ;)


Quick look at the code and ZZTU does tune, not 2Tone.

Do you want ZZUT ?

R.
K1LSB
Posts: 639
Joined: Wed Feb 05, 2020 5:25 pm

Re: Thetis v2.9.0 - Updates and Issues

Postby K1LSB » Sun Apr 17, 2022 7:18 pm

Richie,

Neither RX1 or RX2 are receiving any signal for me. Attached are screenshots of my ADC tab and the generated ErrorLog.

Radio is black case 7000DLE MKII running Protocol 2.

Thanks,
Mark

Capture.PNG
Capture.PNG (4.32 MiB) Viewed 7804 times


ErrorLog.jpg
ErrorLog.jpg (183.26 KiB) Viewed 7804 times
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Thetis v2.9.0 - Updates and Issues

Postby w-u-2-o » Sun Apr 17, 2022 7:20 pm

ramdor wrote:
w-u-2-o wrote:@ramdor

Richie--the Two Tone CAT command is broken.

Two Tone is set to "Use Drive Slider". TUN is set to "Use Fixed Drive".

Using the 2TON button on the UI works as expected: drive power is achieved.

Using zztu1; 2TON is produced at the tune power setting.

If TUN is changed to "Use Drive Slider" then zztu1; asserts drive power, so it would appear that zztu1; is following the TUN settings and not the Two Tone settings while the 2TON UI button is following the proper settings.

If it matters, hardware is an 8000DLE.

Now just waiting for Rob to update button and slider packs ;)


Quick look at the code and ZZTU does tune, not 2Tone.

Do you want ZZUT ?

R.


Argh! :( Yes, I meant "ZZUT", my apologies. I'm not dyslexic, really!
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Sun Apr 17, 2022 7:25 pm

K1LSB wrote:Richie,

Neither RX1 or RX2 are receiving any signal for me. Attached are screenshots of my ADC tab and the generated ErrorLog.

Radio is black case 7000DLE MKII running Protocol 2.

Thanks,
Mark

Capture.PNG

ErrorLog.jpg


uninstall through windows, go into the thetis install folder, remove any dll's that are left. It looks like your install process did not put the new channelmaster.dll in there which has that new function SetAudioAmpEnable.

Richie.
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Sun Apr 17, 2022 7:41 pm

w-u-2-o wrote:Argh! :( Yes, I meant "ZZUT", my apologies. I'm not dyslexic, really!


yes replicated here, will look to fix it this evening if I can stay awake ;)

Richie.
User avatar
KA5KKT
Posts: 129
Joined: Thu Aug 06, 2020 6:51 pm

Re: Thetis v2.9.0 - Updates and Issues

Postby KA5KKT » Sun Apr 17, 2022 8:00 pm

I have a curious installation / startup problem beginning approximately with V2.9.0.

Upon clicking the Thetis icon, the splash screen will open and progress with Loading Settings down to about 8 or 7 seconds. At that time installation activity ceases.

Leaving it at that stage and again starting Thetis a warning of 'other Thetis instances running' pops up. Clicking Yes to continue allows it to continue to move forward. At that time error messages regarding enabling CAT on COM1 appear. Clicking through about 3 instances of that warning allows Thetis to then open. A 2nd instance of Thetis appears in the Apps section of the Task Manager. Clicking Power allows Thetis to then run. Then closing Splash under the 1st instance of Thetis and End Task then closes the 1 instance.

The 2nd issuance of Thetis seems to continue to run okay. Perhaps I haven't achieved a complete uninstall of Thetis prior to the later fresh install.

Please pardon me if this has been addressed elsewhere.

Thoughts..?


73,
Dick - KA5KKT

PS 7000DLE MKII - Thetis 2.09.01
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Sun Apr 17, 2022 8:14 pm

@Dick - KA5KKT

1) reboot
2) uninstall
3) check folders
C:\Program Files\OpenHPSDR\Thetis
or
C:\Program Files (x86)\OpenHPSDR\Thetis
have no lingering dlls
4) reinstall
5) run up thetis and leave it start

If it is stuck again, make sure there are no popup windows behind the splash screen, by hovering over Thetis taskbar icon to see if any other windows are there

if nothing and still stuck, check task manager for Thetis.exe. If in list end task

check for Errorlog.txt in C:\Users\<user>\AppData\Roaming\OpenHPSDR\Thetis-x64 or C:\Users\Richie\AppData\Roaming\OpenHPSDR\Thetis

Richie.
User avatar
W1AEX
Posts: 425
Joined: Sun Apr 09, 2017 6:17 pm
Location: Connecticut, USA
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby W1AEX » Sun Apr 17, 2022 9:39 pm

w-u-2-o wrote:@ramdor
Now just waiting for Rob to update button and slider packs ;)


Tricked you Scott! I updated all the slider packs last week. The bad news is that the web hosting server out in California appears to be down and apparently has been for most of the day so w1aex.com is currently dead. No word on when it will come back up. :cry:

Rob

--------
Network Issues
3 hours ago

2022-04-17 14:30 EST

Some servers (sXXX, ws01-ws09, c100/c101, and VPS) are experiencing some connectivity issues that may affect the ability of clients to access services/accounts on these servers.

This has been identified by our server health team, and they are working to resolve the issue as soon as possible.

Thank you for your patience and cooperation in regard to troubleshooting this issue. We will post further updates on this page until the issue is resolved.
"One thing I am certain of is that there is too much certainty in the world."
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Thetis v2.9.0 - Updates and Issues

Postby w-u-2-o » Sun Apr 17, 2022 10:11 pm

Thanks, Rob!
User avatar
W1AEX
Posts: 425
Joined: Sun Apr 09, 2017 6:17 pm
Location: Connecticut, USA
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby W1AEX » Mon Apr 18, 2022 12:25 am

My host server is back up so feel free to download any of the slider packs you want/need to add the new TUNE slider. The packs are available near the bottom of the "Skins" page at:

http://www.w1aex.com/hpsdr/hpsdr.html

73, Rob W1AEX
Attachments
packs.jpg
packs.jpg (87.74 KiB) Viewed 7708 times
"One thing I am certain of is that there is too much certainty in the world."
User avatar
Ernie
Posts: 46
Joined: Mon Dec 04, 2017 11:31 am
Location: Jasper, GA

Re: Thetis v2.9.0 - Updates and Issues

Postby Ernie » Mon Apr 18, 2022 12:32 am

TCI between Thetis and RF-Kit is working!
Thanks Richie!

Ernie
W2FMU
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Mon Apr 18, 2022 12:34 am

W1AEX wrote:My host server is back up so feel free to download any of the slider packs you want/need to add the new TUNE slider. The packs are available near the bottom of the "Skins" page at:

http://www.w1aex.com/hpsdr/hpsdr.html

73, Rob W1AEX


looking good Rob. cheers for updating.
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Mon Apr 18, 2022 12:36 am

Ernie wrote:TCI between Thetis and RF-Kit is working!
Thanks Richie!

Ernie
W2FMU


Ah ha !! that is great news Ernie. Fab ! Yeah is was brilliant that Ernst reached out to the RF-kit folks to find out what they required.
User avatar
KA5KKT
Posts: 129
Joined: Thu Aug 06, 2020 6:51 pm

Re: Thetis v2.9.0 - Updates and Issues

Postby KA5KKT » Mon Apr 18, 2022 1:55 am

ramdor wrote:@Dick - KA5KKT

1) reboot
2) uninstall
3) check folders
C:\Program Files\OpenHPSDR\Thetis
or
C:\Program Files (x86)\OpenHPSDR\Thetis
have no lingering dlls
4) reinstall
5) run up thetis and leave it start

If it is stuck again, make sure there are no popup windows behind the splash screen, by hovering over Thetis taskbar icon to see if any other windows are there

if nothing and still stuck, check task manager for Thetis.exe. If in list end task

check for Errorlog.txt in C:\Users\<user>\AppData\Roaming\OpenHPSDR\Thetis-x64 or C:\Users\Richie\AppData\Roaming\OpenHPSDR\Thetis

Richie.



Thanks, Richie.

I'll give it a go after the NASCAR race concludes. (US 'Stock Car' Racing)


73,
Dick - KA5KKT
Dave30019
Posts: 44
Joined: Thu Oct 31, 2019 10:54 am
Location: Dacula GA USA

Re: Thetis v2.9.0 - Updates and Issues

Postby Dave30019 » Mon Apr 18, 2022 12:36 pm

TCI is now working with RFKit amp & Thetis.

The Best just got Better.

Thanks Ritchie,
Dave
k4em
DL8LAQ
Posts: 212
Joined: Sun Apr 09, 2017 3:28 pm
Location: JO43XU

Re: Thetis v2.9.0 - Updates and Issues

Postby DL8LAQ » Mon Apr 18, 2022 12:49 pm

Using rev. 4 now TCI with RF-Kit PA ist working. Nice!

But I have a problem with rx attentuator. Several times now after transition from tx to rx the ATT (RX1) is at maximum, but that is not indicated. ATT display still shows 0. I have to switch ATT to get attenuation to 0 again.
The problem does not happen in QSK mode. Back to SEMI the ATT is at max again.
It happens also in SSB or FM.
RX2 is attenuated in the same way. Switching RX2 ATT brings gain back to 0 on both RX1 and RX2.
It happens on 20m, 10, but not on other bands.

It think I should build a new database.
73, Norbert - DL8LAQ - ANAN-G2 w/display - Richie's latest Thetis version and pihpsdr by N1GP&DL1YCF
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Mon Apr 18, 2022 1:16 pm

DL8LAQ wrote:Using rev. 4 now TCI with RF-Kit PA ist working. Nice!

But I have a problem with rx attentuator. Several times now after transition from tx to rx the ATT (RX1) is at maximum, but that is not indicated. ATT display still shows 0. I have to switch ATT to get attenuation to 0 again.
The problem does not happen in QSK mode. Back to SEMI the ATT is at max again.
It happens also in SSB or FM.
RX2 is attenuated in the same way. Switching RX2 ATT brings gain back to 0 on both RX1 and RX2.
It happens on 20m, 10, but not on other bands.

It think I should build a new database.


it might be an issue with the new attenuation implementation, I will do some testing later this afternoon. Perhaps some more reports will come in. Can you try to replicate and construct a procedure to make it happen on demand?
Last edited by ramdor on Mon Apr 18, 2022 1:36 pm, edited 1 time in total.
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Mon Apr 18, 2022 1:36 pm

yes, i have replicated here, working a fix now

Richie.
DL8LAQ
Posts: 212
Joined: Sun Apr 09, 2017 3:28 pm
Location: JO43XU

Re: Thetis v2.9.0 - Updates and Issues

Postby DL8LAQ » Mon Apr 18, 2022 1:40 pm

Hi Richie,

it just happens and is a permanent bug. I will try to replicate the problem with a clean database now.

Edit: No problem with a clean db. Now I have to change to my preferred settings.
73, Norbert - DL8LAQ - ANAN-G2 w/display - Richie's latest Thetis version and pihpsdr by N1GP&DL1YCF
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Mon Apr 18, 2022 1:44 pm

DL8LAQ wrote:Hi Richie,

it just happens and is a permanent bug. I will try to replicate the problem with a clean database now.

Edit: No problem with a clean db. Now I have to change to my preferred settings.


it is related to having the same adc set for both ddc2 and ddc3 in your case with 7000.

I am still working the fix.

Richie.
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Thetis v2.9.0 - Updates and Issues

Postby w-u-2-o » Mon Apr 18, 2022 1:52 pm

Richie--the ADC/ATT/RX combinations are many, as you know. If you'd like to post a list of tests for people to verify functionality on the various hardware types, Hermes to 8000, and people ran through the list, would that be helpful to you?
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Mon Apr 18, 2022 1:55 pm

Well any anomalies that people notice should include a report of what has happened, the method they use to replicate it, the radio model, and screenshot of the DDC/ADC page.

Norbert's issue is an issue for everyone, I have fixed it here, but still testing. It is related to the same adc's being used for the rx1 and rx2 ddc. It incorrectly modifies the TXatt.

Richie.
DL8LAQ
Posts: 212
Joined: Sun Apr 09, 2017 3:28 pm
Location: JO43XU

Re: Thetis v2.9.0 - Updates and Issues

Postby DL8LAQ » Mon Apr 18, 2022 1:56 pm

ramdor wrote:it is related to having the same adc set for both ddc2 and ddc3 in your case with 7000.

I am still working the fix.


Ok, I will check that with the previously used database.

Attached are the ADC settings. I don't use a 2nd antenna, so both rx are tied to ADC0.

Edit: Yes, using the previous database and default ADC settings the problem is gone!
Attachments
Thetis_2022-04-18_15-57-29.jpg
Thetis_2022-04-18_15-57-29.jpg (75.31 KiB) Viewed 7529 times
73, Norbert - DL8LAQ - ANAN-G2 w/display - Richie's latest Thetis version and pihpsdr by N1GP&DL1YCF
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Mon Apr 18, 2022 2:06 pm

DL8LAQ wrote:Edit: Yes, using the previous database and default ADC settings the problem is gone!


yes, thanks for confirming that, exactly what I replicated here. I will be rebuilding the installers in about 30 mins.
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Mon Apr 18, 2022 2:33 pm

PRE-RELEASE 2.9.0.4 updated

Uninstall, and re-install if you have used 2.9.0.4 previously !

https://github.com/ramdor/Thetis-2.9.0/ ... .9.0.4-pre

Has been updated with fixes for the ATT issue where RX1 + RX2 use the same ADC. Also added GridMin to NoiseFloor option which is early work in progress.

gridMinToNF.png
gridMinToNF.png (53.21 KiB) Viewed 7509 times
DL8LAQ
Posts: 212
Joined: Sun Apr 09, 2017 3:28 pm
Location: JO43XU

Re: Thetis v2.9.0 - Updates and Issues

Postby DL8LAQ » Mon Apr 18, 2022 2:58 pm

Deinstalled prev ver, installed new version, but the bug is still in here! I will try later with clean db. Have to leave for ice cream and Liqueur
tasting.

"Adjust Min to Noise Floor" is a beautiful feature!
73, Norbert - DL8LAQ - ANAN-G2 w/display - Richie's latest Thetis version and pihpsdr by N1GP&DL1YCF
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Thetis v2.9.0 - Updates and Issues

Postby ramdor » Mon Apr 18, 2022 3:02 pm

DL8LAQ wrote:Deinstalled prev ver, installed new version, but the bug is still in here! I will try later with clean db. Have to leave for ice cream and Liqueur
tasting.

"Adjust Min to Noise Floor" is a beautiful feature!


can you send me your db? enjoy the tasting :)
EA1DAV
Posts: 52
Joined: Wed May 30, 2018 6:31 am

Re: Thetis v2.9.0 - Updates and Issues

Postby EA1DAV » Mon Apr 18, 2022 3:30 pm

May be I am wrong, but this measuremet is dB and not dBm.

Not sure what PBNP is.
Attachments
Captura.JPG
Captura.JPG (23.33 KiB) Viewed 7486 times

Return to “Thetis”